Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Description Single pole thermal circuit breaker with press-to-reset, tease-free, trip- free,snap action mechanism. Type 2-5000 is available with optional manual release (-H), type 2-5700 can be supplied as a push-push switch/circuit breaker (R-type TO CBE to EN 60934 in press-to-reset configuration; M-type when fitted with manual release -H; S-type with push-push operation). Fitted with flange or threadneck for panel mounting. Options include an additional unprotected circuit tap (-A3). 1 Approved to CBE standard EN 60934 (IEC 60934). Typical applications Motors, transformers, solenoids, battery chargers, power supplies, 2-5000-... 2-5700-... appliances, machinery, extra low voltage systems. Ordering information Technical data Type No. For further details please see chapter: Technical Information 2-5000 flange mounting Voltage rating AC 250 V; DC 28 V 2-5700 threadneck panel mounting (UL: AC 250 V;DC 50 V) (hardware bulk shipped) Threadneck design – type 2-5700 only Current rating range 0.05...25 A iG1 moulded threadneck 3/8"-27UNS-2A Typical life AC 250 V / DC 28 V: iG2 moulded threadneck M12x1 0.05...16 A 5,000 operations at 2 x I , inductive N Terminal design 17...25 A 5,000 operations at 2 x I , resistive N P10 blade terminals 6.3-0.8 mm (QC .250) Ambient temperature -20...+60 °C (-4...+140 °F) K10 screw terminals M4x6 Shunt terminal (optional) -P10 only Insulation co-ordination rated impulse pollution A3shunt terminal (up to I 2.5 A/6 A max. load) (IEC 60664 and 60664 A) withstand voltage degree N Manual release (optional) 2.5 kV 2 H manual release facility (type 2-5000 only) reinforced insulation in operating area DD push to release/push to reset (type 2-5700 only) Dielectric strength Current ratings (IEC 60664 and 60664A) test voltage 0.05...25 A operating area AC 3,000 V Insulation resistance > 100 MΩ (DC 500 V) 2-5700 -iG1 - P10 -.. -DD - 8 A ordering example Interrupting capacity I 0.05...2.5 A 8 x I cn N The exact part number required can be built up from the table of choices shown 3...5 A 20 x IN above. Ordering references for optional features should be omitted if not required. 6...12 A 200 A (higher interrupting capacity available to special order) 13...25 A 400 A Interrupting capacity I U N N (UL 1077) 0.05...20 A AC 250 V 2,000 A 0.05...25 A DC 50 V 2,000 A (higher values upon request) Standard current ratings and typical internal resistance values Degree of protection operating area IP40 (IEC 60529/DIN 40050) terminal area IP00 Current Internal Current Internal Vibration 8 g (57-500 Hz) ±0.61 mm (10-57 Hz), rating (A) resistance (Ω) rating (A) resistance (Ω) to IEC 60068-2-6, test Fc, 0.05 280 3 0.1 10 frequency cycles/axis 0.08 100 3.5 0.06 Shock 25 g (11 ms) 0.1 110 4 0.06 to IEC 60068-2-27, test Ea 0.2 29 4.5 0.05 Corrosion 96 hours at 5 % salt mist, to IEC 60068-2-11, test Ka 0.3 14 5 0.05 Humidity 240 hours at 95 % RH 0.4 7 6 0.02 to IEC 60068-2-3, test Ca 0.5 4.9 7 0.02 Mass approx. 29 g 0.6 3.4 8 0.02 0.7 2.5 10 < 0.02 0.8 1.8 12 < 0.02 Approvals 1 1.2 13 < 0.02 1.2 0.8 15 < 0.02 Authority Voltage ratings Current ratings 1.5 0.6 16 < 0.02 VDE (EN 60934) AC 250 V; DC 28 V 0.05...25 A 1.8 0.4 20 < 0.02 CSA/ UL AC 250 V; DC 50 V 0.05...20 A 2 0.3 22 < 0.02 CCC AC 250 V 0.05...25 A 2.5 0.2 25 < 0.02 SEV AC 250 V; DC 28 V 0,05...25 A 06/07(070706) www.e-t-a.com 1 - 99

Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Dimensions Terminal design 2-5000-P10 -P10-A3 -K10 0.05...2.5 A .ø397.45 ON OFF ø.1533.15 1 12.2.480 18.2.717 1 4 3 2 10.4.409 1 4 3 2 13 5.197 441.73 7.276 .512 ftliagth hteenaidng s ctorerqwu eM 14.x26 N ISmO1580 A 49 10..40 1 4 3 2 Installation drawings 19.8 14.5 .780 .571 31 2-5000-P10 blade terminal DIN 46244-A6.3-0.8 current rating in A 1.22 (QC .250) operating area 2-5000-P10-A3 5 18.5 .728 0.05...2.5 A 1 4 3 2 14.507 ø4.5.177 15.907 .51132 A max. 2.5max .098 1 4 3 2 2-5700-P10 mounting area iG1=3/8-27UNS-2Atightening torque max. 1 Nm iG2=M12x1 tightening torque max. 1.5 Nm ø6.5 .256 2-5700-P10 22.5FF.88616.5N .650 A 10.394 operating area max. 2.5max .098 O O 46.51.83 25984 A 25984 . . 1 4 3 2 49 10..40 blade terminal 19.8 DIN 46244-A6.3-0.8 14.5 1 4 3 2 .780 (QC .250) .571 mounting area 29 1 1 1.14 .039 .039 D-shaped threadneck current rating in A for standard (-DD version without push button marking) mounting hole 5 365 iG1=8.8iG2=11.iG1=.34iG2=.44 S.W55 114 iiiiGGGG1212====..øø349178.2806. 2---..0 00-.000144.1 G1=8.9 -0.1G2=11.5 -0.1 G1=.350 -.004G2=. 453 -.004 ii ii This is a metric design and millimeter dimensions take precedence (mm ) inch 1 - 100 www.e-t-a.com 06/07(070706)

Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Internal connection diagrams 0.05 ... 2.5 A 3 ... 25 A (with or without shunt terminal) (without shunt terminal) 1 1 (3) 1 (-A3) 2 2 Typical time/current characteristics at +23°C/+73.4°F 10000 0.05 - 2.7 A 2.8 - 23 A 25 A 1000 ds n o ec 100 n s e i m p ti Tri 10 1 0.1 1 2 4 6 810 20 40 ... times rated current The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 – Technical information. Ambient temperature °F -4 +14 +32 +73.4+104+122 +140 °C -20 -10 0 +23 +40 +50 +60 Derating factor 0.76 0.84 0.92 1 1.08 1.16 1.24 This is a metric design and millimeter dimensions take precedence (mm ) inch 06/07(070706) www.e-t-a.com 1 - 101

Thermal Overcurrent Circuit Breakers 2-5000/2-5700-... Accessories for types 2-5000 and 2-5700 with screw terminals -K10 Bus bar 176 Y 303 563 01 6.93 162 X 6.38 7 18 60° .276 .709 1 10394 M4 . X 1.1043 9 . 207 . Accessories for type 2-5000-... Accessories for type 2-5700-... Water splash cover, transparent Fixing plate With 3/8" threadneck (-iG1) for push button (IP64) Y 301 056 02 Y 300 728 01 Water splash cover, transparent Y 300 538 01 and knurled nut Y 300 628 01 1.5.059 2.91.756 2.3.0910.5.020 X 200 799 01 (IP64) 50 31.5 14.5 1.97 1.24 4.5 .51781 40 .177 .709 1.57 3/8-27 UNS-2B 58 18..72 Water splash cover, Hex nut with splash transparent with cover black without O ring 40 special knurled nut X 210 739 01 (IP64) 1.57 X 200 798 02 (IP64) transparent splash cover 50 X 201 296 03 (IP64) 1.97 Rear terminal shroud, transparent (IP64) Y 300 476 01 12.5 29 .492 1.14 3/8-27 UNS-2B 3/8-27 UNS-2B E - T - A Separate hardware 491.93 HY e3x0 0n u1t92 01 KY n3u0r7le 1d1 7n u0t2 3/8-27 UNS-2B 3/8-27 UNS-2B ø12 ø6 .472 .236 SW14 2.5 ø15 3 .551 .098 .591 .118 With M12 threadneck (-iG2) Hex nut with splash cover, black Water splash cover, X 201 296 01 without O ring (IP64) transparent with knurled nut X 200 801 03 with O ring (IP66) and O ring Hex nut with splash cover, X 210 663 01 (IP64) transparent X 200 801 08 with O ring (IP66) M12x1 M12x1 Hex nut Knurled nut Y 300 116 02 Y 302 065 01 M12x1 M12x1 3.2 .126 This is a metric design and millimeter dimensions take precedence (mm ) inch All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications SW14 2.5 ø17 0.5 x 45° without notice is reserved.Product markings may not be exactly as the ordering codes. .551 .098 .669 .020 x 45° Errors and omissions excepted. 1 - 102 www.e-t-a.com 06/07(070706)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: E -T-A Circuit Breakers: 2-5700-IG1-P10-DD-25A 2-5700-IG1-P10-DD-10A 2-5700-IG1-K10-DD-20A 2-5700-IG1-P10-DD-0.1A 2-5700-IG1- K10-DD-5A 2-5700-IG1-P10-DD-3A 2-5700-IG1-K10-DD-25A 2-5700-IG1-P10-DD-5A 2-5700-IG1-P10-10A 2-5700- IG1-P10-DD-20A 2-5700-IG1-P10-DD-15A 2-5700-IG1-P10-5A 2-5700-IG1-P10-DD-1A 2-5700-IG1-K10-DD-15A 2- 5700-IG1-P10-3A 2-5700-IG1-P10-15A 2-5700-IG1-P10-DD-2A 2-5700-IG1-P10-1.8A 2-5700-IG1-P10-6A 2-5700- IG1-K10-DD-3A 2-5700-IG1-K10-DD-0.3A 2-5700-IG1-P10-DD-8A 2-5700-IG2-K10-20A 2-5700-IG1-K10-1125-10A 2-5700-IG1-K10-1125-20A 2-5700-IG1-K10-5A 2-5700-IG1-K10-DD-0.05A 2-5700-IG1-K10-DD-2.5A 2-5700-IG1-P10- 3.5A 2-5700-IG2-P10-DD-30A 2-5700-IG2-P10-2A 2-5700-IG1-K10-1A 2-5700-IG2-P10-5A 2-5700-IG1-P10-A3-DD- 0.3A 2-5700-IG1-K10-6A 2-5700-IG1-K10-25A 2-5700-IG1-K10-2A 2-5700-IG1-P10-DD-0.8A 2-5700-IG1-P10-A3- 0.5A 2-5700-IG1-K10-4A 2-5700-IG1-P10-A3-0.05A 2-5700-IG1-P10-13A 2-5700-IG1-P10-2A 2-5700-IG2-P10-DD- 3A 2-5700-IG1-K10-15A 2-5700-IG1-P10-19A 2-5700-IG1-P10-A3-DD-10A 2-5700-IG1-K10-DD-35A 2-5700-IG2- P10-DD-5A 2-5700-IG2-K10-DD-8A 2-5700-IG1-P10-0.25A 2-5700-IG2-P10-25A 2-5700-IG1-P10-20A 2-5700-IG1- K10-DD-32A 2-5700-IG1-P10-DD-12A 2-5700-IG1-P10-16A 2-5700-IG1-P10-A3-DD-2.5A 2-5700-IG1-P10-0.05A 2- 5700-IG1-K10-DD-0.5A 2-5700-IG1-P10-12A 2-5700-IG2-K10-DD-15A 2-5700-IG2-K10-10A 2-5700-IG1-P10-A3-DD- 3A 2-5700-IG1-P10-DD-1.2A 2-5700-IG1-P10-A3-DD-0.1A 2-5700-IG1-K10-DD-30A 2-5700-IG1-K10-1125-15A 2- 5700-IG1-P10-DD-0.5A 2-5700-IG1-K10-38A 2-5700-IG1-P10-A3-DD-7A 2-5700-IG1-P10-A3-DD-0.5A 2-5700-IG1- K10-DD-7A 2-5700-IG2-P10-DD-20A 2-5700-IG2-K10-32A 2-5700-IG1-P10-7A 2-5700-IG1-P10-2.5A 2-5700-IG1- P10-A3-20A 2-5700-IG1-P10-2.7A 2-5700-IG1-P10-DD-0.05A 2-5700-IG1-K10-DD-2A 2-5700-IG1-P10-A3-0.1A 2- 5700-IG1-K10-3A 2-5700-IG1-P10-A3-0.4A 2-5700-IG1-P10-8A 2-5700-IG2-K10-DD-12A 2-5700-IG1-K10-8A 2- 5700-IG1-P10-DD-1.5A 2-5700-IG1-K10-DD-6A 2-5700-IG2-P10-8A 2-5700-IG1-P10-A3-DD-20A 2-5700-IG1-P10- DD-7A 2-5700-IG2-P10-15A 2-5700-IG1-P10-DD-2.5A 2-5700-IG1-K10-DD-8A 2-5700-IG1-K10-DD-0.2A 2-5700- IG2-K10-DD-10A 2-5700-IG1-K10-20A 2-5700-IG1-K10-1.8A 2-5700-IG2-K10-DD-25A 2-5700-IG1-P10-0.7A