4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 20 LOC DIST REVISIONS ALL RIGHTS RESERVED. C COPYRIGHT 20 BY - - - P LTR DESCRIPTION DATE DWN APVD A REVISED PER ECR-15-007373 31JUL2015 RS DD A1 REVISED PER ECR-18-010414 11JUL2018 SR DD A2 REVISED PER ECR-18-012133 01AUG2018 SR DD 14.6 D D 3.1 3.3 4.1 NOTES: 1 MATERIALS AND FINISH: -HOUSING: PBT-GF, COLOR: NATURAL 5.0 -CONTACTS: COPPER ALLOY FINISH: SEE TABLE -THERMAL SPRING: STAINLESS STEEL 16.6 2. MUST COMPLY WITH DIRECTIVE 2002/95/EC (ROHS) 5.00 C C 8.00 3 REFER TO LED MANUFACTURER'S DATASHEET FOR LED DIMENSIONS DIM "B" 4. REFER TO LED DATASHEET FOR RECOMMENDED REF THERMAL INTERFACE MATERIALS DIM "A" 5. RECOMMENDED SCREW SIZE: M3 OR #4. 3.7 TORQUE SCREWS TO 2.5 in-lbf TO 4.0 in-lbf REF 2.0 8.00 6. WIRE TYPES AND SIZES ACCEPTED 18, 20 AND 22 AWG SOLID WIRE 2.65 7 18 AND 20 AWG PREBOND STRANDED WIRE 18 AWG STRANDED WIRE (16 STRAND COUNT) MAX INSULATION OD: 2.10 MM STRIP LENGTH: 7.5±1.0 7 IN APPLICATIONS WHERE THE LED SUBSTRATE IS LESS THAN 1.50MM THICK A THERMAL SPRING IS REQUIRED. B AS NOTED IN THE TABLE THE THERMAL SPRINGS WILL BE B INSTALLED PRIOR TO SHIPMENT FROM THE TE FACTORY. YES 3.75 2.95 TIN OVER NICKEL 3-2154857-3 8 REQUIRES THE USE OF LED WITH GOLD PLATED PADS YES 3.75 2.95 GOLD OVER NICKEL 2-2154857-3 3.0 9 RECOMMENDED PCB PAD AND HEAT SINK LAYOUT FOR YES 2.25 2.00 GOLD OVER NICKEL 2-2154857-2 LED PANEL APPLICATIONS. THE RECOMMENDED LED HOLDER YES 1.85 1.55 GOLD OVER NICKEL 2-2154857-1 FOR THESE APPLICATIONS IS PART NUMBER 1-2154857-3. IN APPLICATIONS WHERE THE LED PANEL IS LESS THAN 1.5MM NO 3.75 2.95 TIN OVER NICKEL 1-2154857-3 THICK USE 3-2154857-3 WITH THERMAL SPRINGS IF THERMAL NO 2.25 2.00 TIN OVER NICKEL 1-2154857-2 PRESSURE FROM THE HOLDER IS REQUIRED. NO 3.75 2.95 GOLD OVER NICKEL 2154857-3 10 IN APPLICATIONS WHERE THE LED SUBSTRATE IS LESS THAN 1.50MM THICK AND A THERMAL SPRING IS NOT USED 7 10 THERMAL DIM "B" DIM "A" CONTACT PLATING PART NUMBER IT IS THE RESPONSIBILITY OF THE END USER TO ENSURE THAT SPRING ADEQUATE SYSTEM THERMAL PERFORMANCE IS ACHIEVED. DWN 16MAR2012 THIS DRAWING IS A CONTROLLED DOCUMENT. M. MOSTOLLER THE LED HOLDER ALONE WILL NOT PROVIDE ENOUGH FORCE CHK 16MAR2012 TE Connectivity A A M. MOSTOLLER BY ITSELF TO GENERATE A RELIABLE AND STABLE THERMAL DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: APVD 16MAR2012 NAME mm - TWO PIECE ASSEMBLY SOLUTION FOR THE LED. 0 PLC - PRODUCT SPEC LUMAWISE LED HOLDER, SCALABLE 1 PLC 0.2 108-133005 2 PLC 0.13 - 3 PLC 0.001 APPLICATION SPEC 4 PLC 0.0001 SIZE CAGE CODE DRAWING NO RESTRICTED TO ANGLES 2 114-32043 MATERIAL FINISH WEIGHT - A2 00779 2154857 - - - SCALE SHEET OF REV Customer Drawing 6:1 1 3 A2 1471-9 (3/11)

4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 20 LOC DIST REVISIONS ALL RIGHTS RESERVED. C COPYRIGHT 20 BY - - - P LTR DESCRIPTION DATE DWN APVD RECOMMENED SOCKET LED TYPE LED DIMENSION DIM "C" DIM "D" DIM "E" DIM "F" - SEE SHEET 1 - - - 3 PART NUMBER BRIDGELUX ES 25.5 X 22.3 9.70 16.30 6.30 15.80 1-2154857-2 BRIDGELUX LS 17.5 X 13.3 5.83 11.83 1.83 11.93 1-2154857-3 D D BRIDGELUX V10 15.8 X 15.80 4.95 13.05 3.05 11.05 2-2154857-1 BRIDGELUX V15 21.0 X 21.0 7.55 15.65 5.65 13.65 2-2154857-1 DIM "C"(cid:1)#(cid:2)0.05 CITIZEN CLL020/022 13.5 X 13.5 3.80 11.90 1.90 9.90 2-2154857-1 DIM "D"(cid:1)#(cid:2)0.05 CITIZEN CLL030/032 19.0 X 19.0 6.55 14.65 4.65 12.65 2-2154857-1 CITIZEN CLL040/042 28.0 X 28.0 11.05 19.15 9.15 17.15 2-2154857-2 CITIZEN CLL050/052 38.0 X 38.0 16.05 24.15 14.15 22.15 2-2154857-2 DRILL AND TAP FOR M3 CITIZEN L330 28.0 X 19.0 11.05 14.65 4.65 17.15 2-2154857-3 OR #4 MOUNTING HARDWARE 2 PLACES CITIZEN L340 28.5 X 28.5 11.30 19.40 9.40 17.40 2-2154857-3 CREE CXA2011 22.0 X 22.0 8.05 16.15 6.15 14.15 1-2154857-3 DRILL 2.75 0.05 CREE CXA13XX/CXB13XX 13.35 X 13.35 3.73 11.83 1.83 9.83 2-2154857-2 FOR ALIGNMENT POST C C CREE CXA15XX/CXB15XX 15.85 X 15.85 4.98 13.08 3.08 11.08 2-2154857-2 2 PLACES CREE CXA1816/CXB1816 17.85 X 17.85 5.98 14.08 4.08 12.08 2-2154857-2 CREE CXB1820 17.85 X 17.85 5.98 14.08 4.08 12.08 2-2154857-2 CREE CXA1830/CXB1830 17.85 X 17.85 5.98 14.08 4.08 12.08 2-2154857-1 CREE CXA25XX 23.85 X 23.85 8.98 17.08 7.08 15.08 2-2154857-2 CREE CXA30XX 27.35 X 27.35 10.73 18.83 8.83 16.83 2-2154857-2 CREE CXA3590 34.85 x 34.85 14.48 22.58 12.58 20.58 2154857-3 10 EDISON-OPTO 2PHM09X 13.5 X 13.5 3.80 11.90 1.90 9.90 2-2154857-1 DIM "E"(cid:1)#(cid:2)0.05 EDISON-OPTO 2PHM30X 19.0 X 19.0 6.55 14.65 4.65 12.65 2-2154857-1 LG INNOTEK 10,13,17,24W LEMWM 24.4 X 18.0 9.25 14.15 4.15 15.35 2-2154857-2 DIM "F"(cid:1)#(cid:2)0.05 NICHIA COB L SERIES 19.0 X 16.0 6.55 13.15 3.15 12.65 2-2154857-1 B NICHIA COB-J360 24.0 X 19.0 9.05 14.65 4.65 15.15 2-2154857-1 B CENTER OF LED OSRAM GW KAJ 30.0 X 30.0 12.05 20.15 10.15 18.15 3-2154857-3 PACKAGE PHILIPS 1203 19.0 X 16.0 6.55 13.15 3.15 12.65 2-2154857-2 PHILIPS 1204,1205,1208 24.0 X 20.0 9.05 15.15 5.15 15.15 2-2154857-3 DIM "C"(cid:1)#(cid:2)0.05 SAMSUNG LC013B 17.0 X 17.0 5.55 13.65 3.65 11.65 2-2154857-3 DIM "F"(cid:1)#(cid:2)0.05 SAMSUNG LC026B,LC040B 21.5 X 21.5 7.80 15.90 5.90 13.90 2-2154857-3 SAMSUNG LC040D,LC060D,LC080D 28 X 28 11.05 19.15 9.15 17.15 2-2154857-2 DIM "E"(cid:1)#(cid:2)0.05 SHARP MINI-ZENIGATA 8 15.0 X 12.0 4.55 11.15 1.15 10.65 2-2154857-1 DIM "D"(cid:1)#(cid:2)0.05 SHARP MEGA-ZENIGATA 24.0 X 20.0 9.05 15.15 5.15 15.15 2-2154857-3 8 RECOMMENDED MOUNTING HOLE PATTERN SEOUL SEMI SBWW1F1A 13.25 X 13.25 3.68 11.78 1.78 9.78 2-2154857-1 SEOUL SEMI SBWW2F1A 17.75 X 17.75 5.93 14.03 4.03 12.03 2-2154857-2 DWN 16MAR2012 THIS DRAWING IS A CONTROLLED DOCUMENT. M. MOSTOLLER TE Connectivity CHK 16MAR2012 A A M. MOSTOLLER DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: APVD 16MAR2012 NAME mm - TWO PIECE ASSEMBLY 0 PLC - PRODUCT SPEC LUMAWISE LED HOLDER, SCALABLE 1 PLC 0.2 108-133005 2 PLC 0.13 - 3 PLC 0.001 APPLICATION SPEC 4 PLC 0.0001 SIZE CAGE CODE DRAWING NO RESTRICTED TO ANGLES 2 114-32043 MATERIAL FINISH WEIGHT - A2 00779 2154857 - - - SCALE SHEET OF REV Customer Drawing 6:1 2 3 A2 1471-9 (3/11)

4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 20 LOC DIST REVISIONS ALL RIGHTS RESERVED. C COPYRIGHT 20 BY - - - P LTR DESCRIPTION DATE DWN APVD - SEE SHEET 1 - - - DRILL AND TAP FOR SEE DETAIL A M3 OR #4 MOUNTING D D HARDWARE EDGE OF LED 2.95 PANEL PCB 5.15 EDGE OF LED ELECTRICAL PANEL PCB CONTACT PAD 2.00 2.00 3.20 3.15 3.15 4.85 2.00 C C 4.85 3.20 DRILL (cid:1)n(cid:2)2.75(cid:1)#(cid:2)0.05 3.20 FOR HOLDER ALIGNMENT POST EDGE OF LED PANEL PCB 2.00 5.15 EDGE OF LED RECOMMENDED ELECTRICAL 3.20 DRILL (cid:1)n(cid:2)2.75(cid:1)#(cid:2)0.05 PANEL PCB CONTACT PAD 2.95 FOR HOLDER TIN PLATED, 2.5MICRONS MIN ALIGNMENT POST 2 PLACES 9 DETAIL B DRILL AND 9 DETAIL A SCALE 4:1 TAP FOR SCALE 4:1 SEE DETAIL B M3 OR #4 MOUNTING HARDWARE B B 9 1.60 REF CUSTOMER SUPPLIED LED RECOMMENDED PCB PANEL PCB ASSEMBLY THICKNESS CUSTOMER SUPPLIED HEAT SINK ASSEMBLY 9 APPLICATION NOTE: IN ADDITION TO USE WITH COB LEDS THE SCALABLE LED HOLDER CAN BE UTILIZED TO MAKE AN ELECTRICAL CONNECTION TO FR4 OR IMS PCB ASSEMBLIES. RECOMMENDED DIMENSIONAL INFORMATION FOR THIS TYPE OF APPLICATION IS SHOWN IN THE DRAWING VIEWS ABOVE. DWN 16MAR2012 THIS DRAWING IS A CONTROLLED DOCUMENT. M. MOSTOLLER TE Connectivity CHK 16MAR2012 A A M. MOSTOLLER DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: APVD 16MAR2012 NAME mm - TWO PIECE ASSEMBLY 0 PLC - PRODUCT SPEC LUMAWISE LED HOLDER, SCALABLE 1 PLC 0.2 108-133005 2 PLC 0.13 - 3 PLC 0.001 APPLICATION SPEC 4 PLC 0.0001 SIZE CAGE CODE DRAWING NO RESTRICTED TO ANGLES 2 114-32043 MATERIAL FINISH WEIGHT - A2 00779 2154857 - - - SCALE SHEET OF REV Customer Drawing 6:1 3 3 A2 1471-9 (3/11)

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: T E Connectivity: 2-2154857-3