Commercial Chip - C0G 16Vdc to 10kVdc A range of commercial MLC chip capacitors in Ultra stable EIA Standard EIA case sizes and available C/V values are listed Class I C0G, or NP0, dielectric. C0G chips are used in precision below - special sizes, thicknesses and other voltage ratings are circuitry requiring Class I stability and exhibit linear temperature available; please contact the sales office for information. coefficient, low loss and stable electrical properties with time, voltage and frequency. Designed for surface mount application with nickel barrier terminations making them suitable for solder wave and reflow solder board attachment as well as vapor phase attachment for part sizes 2225 or smaller. Silver-palladium terminations are also available for hybrid use with conductive epoxy. Capacitance and voltage selection for popular chip sizes Capacitance and voltage selection for popular chip sizes Size 0402 0504 0603 0805 1005 1206 1210 1515 1808 1812 1825 2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 Size Min cap. 0R3 0R5 0R3 0R5 0R5 3R0 5R0 3R0 5R0 5R0 100 100 150 150 270 270 270 270 390 390 390 390 390 390 390 560 101 Min cap. Tmax inches: 0.024 0.044 0.035 0.054 0.054 0.064 0.065 0.130 0.065 0.080* 0.065 0.100* 0.080 0.140* 0.180 0.080 0.080 0.150* 0.180 0.250 0.250 0.300 0.300 0.300 0.300 0.300 0.300 :inches Tmax mm: 0.61 1.12 0.89 1.37 1.37 1.63 1.63 3.02 1.63 2.03 1.63 2.54 2.03 3.56 4.57 2.03 2.03 3.81 4.57 6.35 6.35 7.62 7.62 7.62 7.62 7.62 7.62 :mm 16V 271 222 152 562 822 153 273 473 393 393 563 563 104 104 683 104 124 124 104 184 184 334 334 394 394 684 824 16V 25V 221 182 122 472 682 123 273 393 333 333 563 563 104 104 683 104 124 124 104 184 184 334 334 394 394 684 824 25V 50V 181 152 102 392 562 123 223 333 223 273 393 393 104 104 683 104 124 124 104 154 184 274 334 394 394 684 824 50V 100V 181 152 102 392 562 103 183 333 153 223 273 393 683 823 563 683 823 104 823 124 154 224 274 274 274 474 564 100V 200V 101 821 561 182 272 562 103 223 103 153 183 273 473 683 563 473 563 823 683 104 124 184 224 274 274 474 564 200V 250V 560 561 331 152 222 392 822 223 682 103 153 223 393 563 473 393 473 683 563 104 124 184 204 224 224 394 474 250V 300V • • • 821 122 272 472 153 472 562 103 153 223 473 393 223 273 563 473 823 104 154 184 224 224 394 474 300V 400V • • • 821 122 182 472 103 472 472 103 123 223 333 333 223 273 393 393 563 823 124 154 184 184 334 394 400V 500V • • • 821 122 182 392 822 472 472 103 123 223 273 273 223 273 333 393 473 683 104 124 154 184 274 334 500V 600V • • • 681 102 152 332 682 392 472 822 103 183 183 153 183 273 273 223 393 393 823 823 104 154 224 274 600V 800V† • • • 681 102 152 332 682 392 472 822 103 183 183 153 183 273 273 183 333 333 563 683 823 124 184 224 800V† 1kV† • • • 471 391 102 222 562 222 332 472 822 103 153 103 103 153 223 123 273 273 563 563 683 104 154 184 1kV† 1.5kV† • • • • • 561 122 392 122 182 272 472 562 103 822 562 822 153 103 183 223 393 393 393 563 823 124 1.5kV† 2kV† • • • • • 391 821 272 821 122 182 272 272 562 472 272 392 822 562 153 153 273 333 333 473 683 104 2kV† 3kV† • • • • • • • 122 391 471 821 122 122 222 222 122 182 332 272 822 103 183 223 223 333 473 683 3kV† 4kV† • • • • • • • 681 221 271 471 821 681 122 122 681 102 182 152 332 562 123 123 123 183 273 393 4kV† 5kV† • • • • • • • • • • • • 391 821 821 391 561 122 102 222 332 682 822 822 123 183 223 5kV† 6kV† • • • • • • • • • • • • • • • • • • • 182 182 392 392 472 562 103 123 6kV† 7kV† • • • • • • • • • • • • • • • • • • • • 122 272 272 332 472 682 822 7kV† 8kV† • • • • • • • • • • • • • • • • • • • • 102 222 222 272 332 562 682 8kV† 9kV† • • • • • • • • • • • • • • • • • • • • 821 152 182 182 272 392 472 9kV† 10kV† • • • • • • • • • • • • • • • • • • • • 681 122 152 152 222 332 392 10kV† * Denotes non standard chip thickness. † Units rated above 800V may require conformal coating to preclude arcing over chip surface Order code needs to have an ’X’ inserted together with the dimension in inches e.g. X080 where dimension is 0.080” 16 | Phone: +1.661.295.5920 | www.novacap.com

Commercial Chip - C0G 16Vdc to 10kVdc l For dielectric characteristics see page 4. l For dimensions see page 12. l For termination options see pages 3 & 15. l For capacitance tolerances available see page 15. l For ordering information see page 15. Note: Maximum capacitance values are shown below as 3 digit code: 2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF. R denotes decimal e.g. 2R7 = 2.7pF. Capacitance and voltage selection for popular chip sizes 2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 Size 270 270 270 270 390 390 390 390 390 390 390 560 101 Min cap. 0.180 0.080 0.080 0.150* 0.180 0.250 0.250 0.300 0.300 0.300 0.300 0.300 0.300 :inches Tmax 4.57 2.03 2.03 3.81 4.57 6.35 6.35 7.62 7.62 7.62 7.62 7.62 7.62 :mm 683 104 124 124 104 184 184 334 334 394 394 684 824 16V 683 104 124 124 104 184 184 334 334 394 394 684 824 25V 683 104 124 124 104 154 184 274 334 394 394 684 824 50V 563 683 823 104 823 124 154 224 274 274 274 474 564 100V 563 473 563 823 683 104 124 184 224 274 274 474 564 200V 473 393 473 683 563 104 124 184 204 224 224 394 474 250V 393 223 273 563 473 823 104 154 184 224 224 394 474 300V 333 223 273 393 393 563 823 124 154 184 184 334 394 400V 273 223 273 333 393 473 683 104 124 154 184 274 334 500V 153 183 273 273 223 393 393 823 823 104 154 224 274 600V 153 183 273 273 183 333 333 563 683 823 124 184 224 800V† 103 103 153 223 123 273 273 563 563 683 104 154 184 1kV† 822 562 822 153 103 183 223 393 393 393 563 823 124 1.5kV† 472 272 392 822 562 153 153 273 333 333 473 683 104 2kV† 222 122 182 332 272 822 103 183 223 223 333 473 683 3kV† 122 681 102 182 152 332 562 123 123 123 183 273 393 4kV† 821 391 561 122 102 222 332 682 822 822 123 183 223 5kV† • • • • • 182 182 392 392 472 562 103 123 6kV† • • • • • • 122 272 272 332 472 682 822 7kV† • • • • • • 102 222 222 272 332 562 682 8kV† • • • • • • 821 152 182 182 272 392 472 9kV† • • • • • • 681 122 152 152 222 332 392 10kV† * Denotes non standard chip thickness. Order code needs to have an ’X’ inserted together with the dimension in inches e.g. X080 where dimension is 0.080” www.novacap.com | Phone: +1.661.295.5920 | 17

Chip Ordering Information y y t t e e n bili bilia Prefix Case Size Dielectric Capacitanc CapacitancTolerance Voltage Terminatio Special Thickness High ReliaTesting Packaging Marking High ReliaTest Criteri XX 1206 N 472 J 101 N X050 H T M - HB Capacitance Code 1st two digits are 1R0 = 1.0pF Special Thickness Packaging Marking sdiiggniti fdiceannot,t etsh ird 120 = 12pF None Standard thickness None Bulk None Unmarked number of zeros, as per Novacap T Tape & Reel M Marked R = decimal 471 = 470pF catalog specifications *Marking not Examples: 102 = 1,000pF X Denotes a special W Waffle Pack asivzaeisla <b l0e6 o0n3 thickness other than 273 = 0.027µF standard. Specify in inches if required. High Reliability Hi-Reliability 474 = 0.47µF (As shown above X Testing Testing Criteria = 0.050”) 105 = 1.0µF None Standard product { HB MIL-PRF-55681 Group A H High Reliability Testing HV MIL-PRF-49467 Group A Dielectric Codes H High Temp Screening HS MIL-PRF-123 Group A N C0G/NP0 Ultra Stable M C0G/NP0 Ultra Stable Magnetic Free Termination Codes F C0G/NP0 High Temp. (up to 160ºC) P Palladium Silver D C0G/NP0 High Temp. (up to 200ºC) Voltage Code K R3L Ultra Stable PR Palladium Silver* R R2D Pulse Energy 1st two digits are significant, K Solderable Palladium Silver* third digit denotes number of Y Y5V General Purpose zeros. For example: N Nickel Barrier* 100% tin Z Z5U General Purpose 160 = 16 Volts Y Nickel Barrier 90% tin, 10% lead B X7R Stable NG Nickel Barrier Gold Flash* 101 = 100 Volts C X7R Stable Magnetic Free C FlexiCap™/Nickel Barrier* 100% tin 501 = 500 Volts X BX MIL D FlexiCap™/Nickel Barrier 90% tin, 10% lead S X8R High Temp. (up to 150ºC) 102 = 1,000 Volts B Copper Barrier* 100% tin E Class II High Temp. (up to 200ºC) 502 = 5,000 Volts E Copper Barrier 90% tin, 10% lead G Class II High Temp. (up to 160ºC) 103 = 10,000 Volts S Silver* W X5R Stable * Indicates RoHS terminations RN Lead free C0G/NP0 Ultra Stable RB Lead free X7R Stable Capacitance Tolerance Codes BB X7R BME Stable BW X5R BME Stable Code Tolerance C0G/NP0 R3L R2D YZ55UV X7R BX X8R ClaIIss X5R PVosTitiCve * Not RF series N M F/D K R Y/Z B C X S E/G W P NPorneefixSt aDndeafird nchiitpions DCB ±±±000...215500pppFFF Cap. Value < 10pF ••• ••• •• RF Improved ESR Capacitor p. 23 F ±1% • • • LS Y3 Certified Safety Capacitor p. 42 - 43 G ±2% • • • • ES Y2 Certified Safety Capacitor p. 42 - 43 J ±5% • • • • • •* • •* • • ST Stacked Capacitor Assembly p. 48 - 53 K ±10% • • • • • • • • • • • • SM Stacked Hi-Rel Capacitor Assembly p. 48 - 53 M ±20% • • • • • • • • • • • • CR Cap-Rack Capacitor Array p. 54 Z +80% -20% • • • •* • RC Bleed Resistor p. 58 - 61 P +100% -0% • • • •* • www.novacap.com | Phone: +1.661.295.5920 | 15

LL TT Technical Summary WW Technical Information Primary Dielectric Types MMBB Novacap provides application notes throughout this catalog C0G/NP0: as a guide to chip selection and attachment methods. Refer Ultra stable Class I dielectric, with negligible dependence of to the Novacap Technical Brochure found at www.novacap. capacitance on temperature, voltage, frequency, and time. com for more details. This technical information includes Used in circuitry requiring very stable performance. the nature of capacitance, dielectric properties, electrical properties, classes of dielectrics, ferroelectric behavior, test X7R: standards, and high reliability test plans. Please do not Stable Class II dielectric, with predictable change in properties hesitate to contact the sales office for any product or technical across a temperature range of -55°C to +125°C. Used as assistance. blocking, decoupling, bypassing, and frequency discriminating elements. This dielectric is ferroelectric and provides higher Capacitor Size capacitance than Class I materials. Size availability is based primarily on capacitance values and voltage rating. Smaller units are generally less expensive. BX: Because mass affects the thermal shock susceptibility of chip The military specification for ceramic chip capacitors (MIL- capacitors, size selection should consider the soldering method PRF-55681) defines a mid-K stable dielectric designated as BX. used to attach the chip to the board. Sizes 1812 and smaller The BX specification has voltage temperature limits in addition can be wave, vapor phase, or reflow soldered. Larger units to temperature limits of capacitance. The BX dielectric is require reflow soldering. limited to ±15% maximum change in capacitance between Chip Selection 25°C and -55°C or +125°C and also has a voltage restriction Multilayer capacitors (MLC) are categorized by dielectric of +15% / -25% maximum change in capacitance between performance with temperature. The Temperature Coefficient 25°C and -55°C or +125°C at rated voltage. of Capacitance describes the variance of capacitance value Z5U/Y5V: with temperature. The choice of components is therefore General purpose Class III dielectrics with higher dielectric largely determined by the temperature stability required of the constant and greater variation of properties over temperature device and the size necessary for the desired capacitance value and voltage. Very high capacitance per volume is attainable and voltage rating. for general purpose applications where stability over a wide Packaging temperature range is not critical. Units are available reeled, in waffle pack, or bulk packaged. Bar coded labels are standard for reeled and bulk packaging. Dielectric er er Termination Material Termination arri arri We recommend the following Combinations B B Palladium Silver Palladium Silver Solderable Palladium Silver Nickel Barrier 100% tin Nickel Barrier 90/10% tin/lead Nickel Barrier Gold flash FlexiCap™/Nickel 100% tin FlexiCap™/Nickel 90/10% tin/lead Copper Barrier 100% tin Copper Barrier 90/10% tin/lead Solderable Silver tSNtCeion r l mdpNFlielaneicrtxak eiAtCediolta t-nBp a aR™tcroyhrpH iemweSrsi,et: h1n 0tN:0 i %cke ml atte Barrier, 100% tin plated - RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Y Nickel Barrier, tin-lead plated Dielectric Code P PR K N Y NG C D B E S C0G/NP0 N/RN • • • • • • • • • D FlexiCap™ Nickel Barrier, R3L K • • • • • • • • tin-lead plated X7R B/RB • • • • • • • • • B Copper Barrier 100% matte X7R BME BB • • • tin plated - RoHS X5R BME BW • • • E Copper Barrier, tin-lead BX X • • • • • • • • • plated Y5V Y • • K Solderable Palladium Silver - Z5U Z • • RoHS (suitable for conductive epoxy attach) C0G/NP0 (Mag free) M • • • • • S Solderable Silver - RoHS X7R (Mag free) C • • • • • Conductive Epoxy attachment: X8R S • • • • • • • • C0G/NP0 (160ºC) F • • • • • • • • P Palladium Silver C0G/NP0 (200ºC) D • • PR Palladium Silver - RoHS Class II (160ºC) G • • • • • • • • NG Nickel Barrier Gold Flash - Class II (200ºC) E • • RoHS (suitable for soldering attach) Pulse Power P • • • R2D R • • • www.novacap.com | Phone: +1.661.295.5920 | 3

Dielectric Characteristics C0G/NP0 (N) Ultra Stable and RoHS 2013 (RN) type Operating temperature range: -55°C to 125°C Temperature coefficient: 0 ±30 ppm/ºC DC ppm TEMPERATURE COEFFICIENT 50 Dissipation factor: 0.1% max @ 25ºC E G N UPPER LIMIT Insulation resistance @25ºC: >100GW or >1000WF whichever is less HA 25 @125ºC: >10GW or >100WF whichever is less E C C N 0 Dielectric <200V: 250% TA wvoitlthasgtaen d i n g 2 0 1 >-550000VV:: 112500%% oorr 755000VV wwhhiicchheevveerr iiss ggrreeaatteerr APACI -25 TYPICAL % C LOWER LIMIT Ageing rate: 0% per decade -50 -55 -25 0 2550 75 100 125 Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C TEMPERATURE °C 1MHz for Capacitance <100pF C0G/NP0 (M) Ultra Stable Non Magnetic Operating temperature range: -55°C to 125°C Temperature coefficient: 0 ±30 ppm/ºC DC ppm TEMPERATURE COEFFICIENT 50 Dissipation factor: 0.1% max @ 25ºC E G N UPPER LIMIT Insulation resistance @25ºC: >1000WF or >10000WF whichever is less HA 25 @125ºC: >100WF or >1000WF whichever is less E C C N 0 Dielectric <200V: 250% TA wvoitlthasgtaen d i n g 2 0 1 >-550000VV:: 112500%% oorr 755000VV wwhhiicchheevveerr iiss ggrreeaatteerr APACI -25 TYPICAL % C LOWER LIMIT Ageing rate: 0% per decade -50 -55 -25 0 2550 75 100 125 Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C TEMPERATURE °C 1MHz for Capacitance <100pF C0G/NP0 (F) Ultra Stable High Temperature (up to 160ºC) Operating temperature range: -55°C to 160°C DC ppm TEMPERATURE COEFFICIENT Temperature coefficient: 0 ±30 ppm/ºC 40 Dissipation factor: 0.1% max @ 25ºC GE N Insulation resistance @25ºC: >100GW or >1000WF whichever is less HA 20 C @160ºC: >1GW or >10WF whichever is less E C N 0 A Dielectric <200V: 250% T withstanding 201-500V: 150% or 500V whichever is greater ACI P -20 voltage >500V: 120% or 750V whichever is greater A C % Ageing rate: 0% per decade -40 -55 -25 0 25 50100 75 125 150 Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C 1MHz for Capacitance <100pF TEMPERATURE °C C0G/NP0 (D) Ultra Stable High Temperature (up to 200ºC) Operating temperature range: -55°C to 200°C DC ppm TEMPERATURE COEFFICIENT Temp. coefficient <200ºC: 0 ±30 ppm/ºC 40 Dissipation factor @ 25ºC: 0.1% Max. GE N Insulation resistance @25ºC: >100GW or >1000WF whichever is less CHA 20 @200ºC: >1GW or >10WF whichever is less CE N 0 A Dielectric <200V: 250% CIT withstanding 201-500V: 150% or 500V whichever is greater PA -20 voltage >500V: 120% or 750V whichever is greater CA % Ageing rate: 0% per decade -40 -55 -25 0 25 5010075 125 150 175 200 Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C TEMPERATURE °C 1MHz for capacitance <100pF 4 | Phone: +1.661.295.5920 | www.novacap.com

Chip Dimensions L T W MB Dimensions - inches (mm) Size Length (L) Width (W) Max. Thickness (T)* Termination Band (MB) 0402 0.040 ± 0.004 (1.02 ± 0.102) 0.020 ± 0.004 (0.508 ± 0.102) 0.024 (0.610) 0.010 ± 0.006 (0.254 ± 0.152) 0504 0.050 ± 0.006 (1.27 ± 0.152) 0.040 ± 0.006 (1.02 ± 0.152) 0.044 (1.12) 0.014 ± 0.006 (0.356 ± 0.152) RF0505 0.055 +0.015 -0.010 (1.4 +0.38 -0.25) 0.055 ± 0.015 (1.40 ± 0.381) 0.057 (1.45) 0.014 ± 0.006 (0.356 ± 0.152) 0603 0.060 ± 0.006 (1.52 ± 0.152) 0.030 ± 0.006 (0.762 ± 0.152) 0.035 (0.889) 0.014 ± 0.006 (0.356 ± 0.152) 0805 0.080 ± 0.008 (2.03 ± 0.203) 0.050 ± 0.008 (1.27 ± 0.203) 0.054 (1.37) 0.020 ± 0.010 (0.508 ± 0.254) 0907 0.090 ± 0.008 (2.29 ± 0.203) 0.070 ± 0.008 (1.78 ± 0.203) 0.060 (1.52) 0.020 ± 0.010 (0.508 ± 0.254) 1005 0.100 ± 0.008 (2.54 ± 0.203) 0.050 ± 0.008 (1.27 ± 0.203) 0.054 (1.37) 0.020 ± 0.010 (0.508 ± 0.254) RF1111 0.110+0.025 -0.010 (2.79 +0.64 -0.25) 0.110 ± 0.015 (2.79 ± 0.381) 0.102 (2.59) 0.020 ± 0.010 (0.508 ± 0.254) 1206 0.125 ± 0.008 (3.18 ± 0.203) 0.060 ± 0.008 (1.52 ± 0.203) 0.064 (1.63) 0.020 ± 0.010 (0.508 ± 0.254) 1210 0.125 ± 0.008 (3.18 ± 0.203) 0.100 ± 0.008 (2.54 ± 0.203) 0.065 (1.65) 0.020 ± 0.010 (0.508 ± 0.254) 1515 0.150 ± 0.015 (3.81 ± 0.381) 0.150 ± 0.015 (3.81 ± 0.381) 0.130 (3.30) 0.030 ± 0.015 (0.762 ± 0.381) 1808 0.180 ± 0.012 (4.57 ± 0.305) 0.080 ± 0.008 (2.03 ± 0.203) 0.065 (1.65) 0.024 ± 0.014 (0.610 ± 0.356) 1812 0.180 ± 0.012 (4.57 ± 0.305) 0.125 ± 0.008 (3.18 ± 0.203) 0.065 (1.65) 0.024 ± 0.014 (0.610 ± 0.356) 1825 0.180 ± 0.012 (4.57 ± 0.305) 0.250 ± 0.015 (6.35 ± 0.381) 0.080 (2.03) 0.024 ± 0.014 (0.610 ± 0.356) 2020 0.200 ± 0.015 (5.08 ± 0.381) 0.200 ± 0.015 (5.08 ± 0.381) 0.180 (4.57) 0.024 ± 0.014 (0.610 ± 0.356) 2221 0.220 ± 0.015 (5.59 ± 0.381) 0.210 ± 0.015 (5.33 ± 0.381) 0.080 (2.03) 0.030 ± 0.015 (0.762 ± 0.381) 2225 0.220 ± 0.015 (5.59 ± 0.381) 0.250 ± 0.015 (6.35 ± 0.381) 0.080 (2.03) 0.030 ± 0.015 (0.762 ± 0.381) 2520 0.250 ± 0.015 (6.35 ± 0.381) 0.200 ± 0.015 (5.08 ± 0.381) 0.180 (4.57) 0.030 ± 0.015 (0.762 ± 0.381) RF2525 0.230 +0.020 -0.012 (5.84 +0.51 -0.30) 0.250 ± 0.015 (6.35 ± 0.381) 0.165 (4.19) 0.030 ± 0.015 (0.762 ± 0.381) 3333 0.330 ± 0.017 (8.38 ± 0.432) 0.330 ± 0.017 (8.38 ± 0.432) 0.250 (6.35) 0.030 ± 0.015 (0.762 ± 0.381) 3530 0.350 ± 0.018 (8.89 ± 0.457) 0.300 ± 0.015 (7.62 ± 0.381) 0.250 (6.35) 0.030 ± 0.015 (0.762 ± 0.381) 4040 0.400 ± 0.020 (10.2 ± 0.508) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 4540 0.450 ± 0.023 (11.4 ± 0.584) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 5440 0.540 ± 0.027 (13.7 ± 0.686) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 5550 0.550 ± 0.028 (14.0 ± 0.711) 0.500 ± 0.025 (12.7 ± 0.635) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 6560 0.650 ± 0.033 (16.5 ± 0.838) 0.600 ± 0.030 (15.2 ± 0.762) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 7565 0.750 ± 0.038 (19.1 ± 0.965) 0.650 ± 0.033 (16.5 ± 0.838) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) * Non standard thicknesses are available - consult the sales office for details. 12 | Phone: +1.661.295.5920 | www.novacap.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: K nowles: 1210N223J250NT 1210N273J160NT 1210N183J250NT 0402N101J500NXT 3333N822M302N 3333N222F402P 1206N182J500N 1210N302J5001N 0805N360F101NT 5550N621K103N 1206N103J500NT 1206N202J500N 1206N202G500N 1206N241J501N 1206N682F500NM 0805N470M501NTM 2225N104J500NT 1210N103F101NT 0504N471J101NT 0504N101J101NT 0504N100J101NT 1812N103J201NT 1812N102J202NT 1808N221K202NT 1812N471K102NT 1825N102K202NT 0504N102J500NT 1812N222M202NXT 2225N221J302NT 2225N151M302NT 1210N472K201CT 1812N151J302NT 1812N221J302NT 1808N101K302NT 1210N102J501NT 4040N153M302N 4040N153M302NT 3333N822M302NT 1210N331K501N 0805N2R2B101NT 1812N273J250NT 1825N273F101YT 1210N223F500P 1206N101K202NT 0603N101F500PW 2225N222K302NX150 2520N272K302P 0603N391F160YT 0603N821F160YT 1210N183F250NM 0805N470K500NT 0805N501F500NT 1206N501F500NT 0805N251F500NT 1206N153J160NT 0805N100B500P 0805N331K501N 0805N331K501NT 0603N121J101NT 1808N120F402N 2225N221J502NT 0805N221F500N 0805N330F500N 1210N510J501NT 4540N104K501LER 0805N0R5B201NT 3530N512J102LER 1812N102K202NXTM 1808N150J302NT 0805N471J501NT 0805N221K101P 0504N470J500P 0805N100J101N 1825N102K402LGH-A 6560N112J103P 1206N202G500NT 1206N103K500NT 2225N683K250LOM 1808N103J201N 1808N103J201NT 0504N561J500P 1210N123J500NT 0805N100F102NT 0805N470F102NT 0402N2R2C500YT 3333N102K502NW 1812N471J402LE 1206N150J500N 0402N171J500N 1808N270J302NT 0805N500K501NX040T