Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TQC Size : B Features ● High voltage (35 V.DC max.) ● RoHS compliance, Halogen free Specifi cations Size code B2 Category temperature range –55 °C to +105 °C Rated voltage range 16 V.DC to 35 V.DC Category voltage range 16 V.DC to 35 V.DC Rated capacitance range 3.9 μF to 33 μF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Surge voltage (V.DC) Rated voltage × 1.15 +105 °C, 2000 h (16TQC33MYFB : 1000 h), rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, −20 % of the initial value (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) Polarity marking(+) R.Cap. code L W H R. Voltage code Lot. No. S S W1 R. Voltage (V.DC) 16 20 25 35 Unit : mm Code C D E V Size code L±0.2 W±0.2 H±0.1 S±0.2 W1±0.1 R. Cap. (μF) 3.9 5.6 8.2 10 15 22 33 B2 3.5 2.8 1.9 0.8 2.2 Code Q6 U6 Y6 A7 E7 J7 N7 ✽ Externals of fi gure are the reference. Characteristics list Case size (mm) Specifications Standard Floor life Rated Rated Category Category Rated Size Ripple ✽1 Min. Refl ow Refl ow Series voltage temp. voltage temp. capacitance ESR ✽2 LC ✽4 L W H code current tan d ✽3 Part number Packaging Q'ty Temp Temp (V.DC) (°C) (V.DC) (°C) (μF) (mΩ max.) (μA) (mAr.m.s.) (pcs) < 260°C < 250°C 105 16.0 105 10 3.5 2.8 1.9 800 100 0.10 48.0 16TQC10M 2000 105 16.0 105 15 3.5 2.8 1.9 1000 90 0.10 72.0 16TQC15M 2000 16 105 16.0 105 22 3.5 2.8 1.9 1000 90 0.10 35.2 16TQC22MYFB 2000 105 16.0 105 33 3.5 2.8 1.9 1000 90 0.10 158.4 16TQC33MYFB 2000 TQC 105 20.0 105 8.2 3.5 2.8 1.9 B2 800 100 0.10 49.2 20TQC8R2M 2000 – 3 20 105 20.0 105 22 3.5 2.8 1.9 1100 90 0.10 132.0 20TQC22MYFB 2000 105 25.0 105 5.6 3.5 2.8 1.9 800 100 0.10 42.0 25TQC5R6M 2000 25 105 25.0 105 15 3.5 2.8 1.9 900 100 0.10 112.5 25TQC15MYFB 2000 35 105 35.0 105 3.9 3.5 2.8 1.9 500 400 0.10 40.9 35TQC3R9MYF 2000 ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jun. 2018

Conductive Polymer Tantalum Solid Capacitors Surface Mount Type Series : TQC Size : D Features ● High voltage (35 V.DC max.) ● RoHS compliance, Halogen free Specifi cations Size code D12 D15 D2 D3L Category temperature range –55 °C to +105 °C Rated voltage range 16 V.DC 16 V.DC to 25 V.DC 16 V.DC to 35 V.DC 16 V.DC to 25 V.DC Category voltage range 16 V.DC 16 V.DC to 25 V.DC 16 V.DC to 35 V.DC 16 V.DC to 25 V.DC Rated capacitance range 33 µF 22 µF to 47 µF 10 µF to 100 µF 68 µF to 150 µF Capacitance tolerance ±20 % (120 Hz / + 20 °C) Leakage current Please see the attached characteristics list Dissipation factor (tan d) Please see the attached characteristics list Surge voltage (V.DC) Rated voltage × 1.15 +105 °C, 2000 h, rated voltage applied Capacitance change Within ±20 % of the initial value Endurance tan d < 1.5 times of the initial limit DC leakage current Within the initial limit +60 °C, 90 % to 95 %, 500 h, No-applied voltage Damp heat Capacitance change Within +40 %, −20 % of the initial value (Steady State) tan d < 1.5 times of the initial limit DC leakage current < 3 times of the initial limit Marking Dimensions (not to scale) Polarity marking(+) R.Cap. code Unit : mm L Size ✽1 ✽2 L±0.2 W±0.2 H±0.1 S±0.2 W1±0.1 code W D12 7.3 4.3 1.15 1.3 2.4 D15 7.3 4.3 1.4 1.3 2.4 D2 7.3 4.3 1.9 1.3 2.4 R. Voltage code Lot. No. H D3L 7.3 4.3 2.8 1.3 2.4 R. Voltage (V.DC) 16 20 25 35 S S W1 ✽ Externals of fi gure are the reference. ✽ 1 ±0.3 : D3L Code C D 1E V ✽ 2 ±0.05 : D12, ±0.2 : D3L Characteristics list Case size (mm) Specifications Standard Floor life Rated Rated Category Category Rated Series (vVo.lDtagCe) t(e°mCp). (Vvo.lDtagCe) (t°emCp.) ca(pµacFitan)ce L W H cSoizdee Rcuiprrpelnet ✽1 (EmSΩ Rma ✽x.2) tan d ✽3 L(µCA ✽)4 Part number PackaMgiinn.g Q'ty RTeeflm opw RTeeflm opw (mAr.m.s.) (pcs) < 260°C < 250°C 105 16.0 105 7.3 4.3 1.15 D12 1800 40 0.10 52.8 16TQC33MYFS 4500 105 16.0 105 33 7.3 4.3 1.9 D2 1400 70 0.10 52.8 16TQC33MYFD 3000 105 16.0 105 7.3 4.3 1.4 D15 1500 55 0.10 75.2 16TQC47MYFT 3000 105 16.0 105 47 7.3 4.3 1.9 1800 40 0.10 75.2 16TQC47MW 3000 16 105 16.0 105 7.3 4.3 1.9 1450 55 0.10 75.2 16TQC47MYFD 3000 105 16.0 105 68 7.3 4.3 1.9 D2 1500 50 0.10 108.8 16TQC68MYF 3000 105 16.0 105 100 7.3 4.3 1.9 1800 50 0.10 160.0 16TQC100MYF 3000 105 16.0 105 150 7.3 4.3 2.8 D3L 1800 50 0.10 240.0 16TQC150MYF 2500 105 16.0 105 150 7.3 4.3 1.9 1500 70 0.15 240.0 1CTQC15173F1 3000 105 20.0 105 33 7.3 4.3 1.9 D2 1400 60 0.10 66.0 20TQC33MYFD 3000 105 20.0 105 7.3 4.3 1.9 1450 55 0.10 94.0 20TQC47MYF 3000 TQC 20 105 20.0 105 47 7.3 4.3 1.4 D15 1500 55 0.10 94.0 20TQC47MYFT 3000 – 3 105 20.0 105 7.3 4.3 1.9 D2 1250 100 0.15 200.0 20TQC100MD2 3000 105 20.0 105 100 7.3 4.3 2.8 D3L 1700 55 0.10 200.0 20TQC100MYF 2500 105 25.0 105 7.3 4.3 1.9 1500 45 0.10 38.0 25TQC15MV 3000 105 25.0 105 15 7.3 4.3 1.9 1000 90 0.10 38.0 25TQC15MYFD 3000 105 25.0 105 7.3 4.3 1.9 D2 1500 45 0.10 55.0 25TQC22MV 3000 25 105 25.0 105 22 7.3 4.3 1.9 1400 60 0.10 55.0 25TQC22MYFD 3000 105 25.0 105 7.3 4.3 1.4 D15 1400 70 0.10 55.0 25TQC22MYFT 3000 105 25.0 105 33 7.3 4.3 1.9 D2 1400 60 0.10 82.5 25TQC33MYF 3000 105 25.0 105 68 7.3 4.3 2.8 D3L 1400 70 0.10 170.0 25TQC68MYF 2500 105 35.0 105 7.3 4.3 1.9 1000 120 0.10 35.0 35TQC10M 3000 35 105 35.0 105 10 7.3 4.3 1.9 D2 1000 120 0.10 35.0 35TQC10MYF 3000 105 35.0 105 15 7.3 4.3 1.9 900 150 0.10 52.5 35TQC15MYF 3000 ✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 5 minutes ◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jun. 2018

Guidelines and precautions regarding the technical information and use of our products described in this online catalog. ■ If you want to use our products described in this online catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially cause personal injury (e.g. aircraft and aerospace equipment, traffic and transportation equipment, combustion equipment, medical equipment, accident prevention, anti-crime equipment, and/or safety equipment), it is necessary to verify whether the specifications of our products fit to such applications. Please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. ■ The quality and performance of our products as described in this online catalog only apply to our products when used in isolation. Therefore, please ensure you evaluate and verify our products under the specific circumstances in which our products are assembled in your own products and in which our products will actually be used. ■ If you use our products in equipment that requires a high degree of reliability, regardless of the application, it is recommended that you set up protection circuits and redundancy circuits in order to ensure safety of your equipment. ■ The products and product specifications described in this online catalog are subject to change for improvement without prior notice. Therefore, please be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, purchase, or use our products. ■ The technical information in this online catalog provides examples of our products' typical operations and application circuits. We do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. ■ If any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and export control, shall be observed. <Regarding the Certificate of Compliance with the EU RoHS Directive/REACH Regulations> ■ The switchover date for compliance with the RoHS Directive/REACH Regulations varies depending on the part number or series of our products. ■ When you use the inventory of our products for which it is unclear whether those products are compliant with the RoHS Directive/REACH Regulation, please select "Sales Inquiry" in the website inquiry form and contact us. We do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. 01-Apr-19