Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors The Type 160 series radial lead metallized polyester box capacitors are constructed in rugged rectangular plastic cases with lead spacings that are standard in the electronics industry. All Type 160 capacitors are available in bulk with a .217” ±.039” lead length, and they are good for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppression. Highlights • RoHS compliant • Rugged plastic case • Case and epoxy fill meets UL94V0 • 10 mm through 27.5 mm lead spacings • Non-inductively wound • Non-polar • Wire lead material, tinned copper clad steel Specifications Capacitance Range 0.0022 µF to 10.0 µF Capacitance Tolerance ±5%, ±10%, ±20% Rated Voltage 63 to 1000 Vdc Operating Temperature Range –55 ºC to +125 ºC (derating voltage to 1.25% per ºC above 85 ºC) Maximum DC Leakage Current After 2 minutes, with rated voltage at +20 ºC 6.3 to 100 Vdc I = .01CV or 3 µA Max (whichever is greater) ≥ 160 Vdc after 3 min, with rated voltage at +20 ºC I = .03CV or 10 µA Max (whichever is greater) C = Capacitance in (µF) V = Rated voltage I = Leakage current in µA Dielectric Withstand Voltage 1.6 x rated voltage for 2 s @ +25 ºC ±5 ºC Dissipation Factor tanδ x 10–4 at 25 ºC ±5 ºC kHz C ≤1 µF C >1 µF 1 ≤100 ≤100 10 ≤150 Total Self Inductance (L) Pitch (mm) 10 15 22.5 27.5 L (nH) ≈ 9 10 18 18 Long Term Stability (after two years) Capacitance change ∆C/C ≤ ±3% under standard environmental conditions Corona (Partial Discharge Inception Voltage)y 200 Vac for 100 Vdc, 200 Vdc 250 Vac for 400 Vdc, 630 Vdc 300 Vac for 1000 Vdc Maximum Pulse Rise Time dv/dt Pitch (mm) Vn 10 15 22.5 27.5 63 3 1.5 1 1 100/160 6/8 3 2 1 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 1000 60 25 15 10 If the working voltage (V) is less than the nominal voltage (Vn), the capaci- tor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. RoHS Compliant CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 160 Metallized Polyester Radial Lead Capacitors Test Method and Performance Capacitor Outline Drawing Insulation Resistance L T Test Conditions Max Max Temperature 25 ºC ±5 ºC Voltage Charge Time 1 minute Voltage Charge 50 Vdc for Vn < 100 Vdc H 100 Vdc for Vn ≥ 100 Vdc Max Performance For Vn > 100 Vdc ≥30,000 MΩ for ≤ 0.33µF .196 -.040 / +0.06 ≥10,000 MΩ x µF for C > 0.33µF (5.0 -1 / +1.5 mm) For Vn ≤100 Vdc ≥10,000 MΩ for C ≤ 0.1µF S Ød ≥1,000 MΩ x µF for>0.1µF ±0.016 ±0.003 Damp Heat Test (±0.5 mm) (±0.076 mm) Test Conditions Temperature +40 ºC Relative Humidity 95% Note: The lead diameter is a maximum dimension Test Duration 21 days for lead spacing ≤15 mm and a nominal for lead spacing >15 mm Performance Capacitance Change ∆C/C ≤ ±5% DF Change ∆tgδ ≤50 x 104 at 1 kHz Insulation Resistance ≥ 50% of limit value Soldering Life Test Test Conditions Test Conditions Temperature +85 ºC Soldering Temperature 260 ºC ±5 ºC Test Duration 1000 hrs Soldering Duration 10 sec ±1 sec Voltage Applied 1.25 x Vn Performance Performance Capacitance Change ∆C/C ≤ ±5% Capacitance Change ∆C/C ≤ ±2% DF Change ∆tgδ ≤30 x 10–4 at 10 kHz for C ≤1.0 µF DF Change ∆tgδ ≤30 x 10–4 at 10 kHz for C ≤1.0 µF ≤20 x 10–4 at 1 kHz for C >1.0 µF ≤20 x 10–4 at 1 kHz for C >1.0 µF Insulation Resistance ≥ 50% of limit value Ratings RoHS Compliant Cap Catalog Inches Millimeters (µF) Part Number L T H S Ød L T H S Ød 63 Vdc .22 160224*63D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .27 160274*63D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .33 160334*63E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .39 160394*63E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .47 160474*63E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .56 160564*63D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .68 160684*63D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .68 160684*63G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .82 160824*63E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .82 160824*63H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 1.0 160105*63H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 1.5 160155*63G–F 0.709 0.236 0.492 0.591 0.031 18.0 6.0 12.5 15.0 0.8 2.2 160225*63H–F 0.709 0.295 0.551 0.591 0.031 18.0 7.5 14.0 15.0 0.8 3.3 160335*63M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 4.7 160475*63N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 6.8 160685*63O–F 1.043 0.394 0.748 0.886 0.031 26.5 10.0 19.0 22.5 0.8 10.0 160106*63P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 * Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 160 Metallized Polyester Radial Lead Capacitors RoHS Compliant Cap Catalog Inches Millimeters (µF) Part Number L T H S Ød L T H S Ød 100 Vdc .10 160104*100C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .12 160124*100C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .15 160154*100C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .18 160184*100C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .22 160224*100D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .27 160274*100D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .33 160334*100E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .33 160334*100F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .39 160394*100E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .39 160394*100F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .47 160474*100E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .47 160474*100F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .56 160564*100G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .68 160684*100G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .82 160824*100H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 1.0 160105*100H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 1.5 160155*100M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 2.2 160225*100N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 3.3 160335*100O–F 1.043 0.394 0.748 0.886 0.031 26.5 10.0 19.0 22.5 0.8 4.7 160475*100P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 6.8 160685*100Q–F 1.260 0.512 0.886 1.083 0.031 32.0 13.0 22.5 27.5 0.8 10.0 160106*100S–F 1.260 0.709 1.299 1.083 0.031 32.0 18.0 33.0 27.5 0.8 160 Vdc .10 160104*160C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 250 Vdc .033 160333*250C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .039 160393*250C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .047 160473*250C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .056 160563*250C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .068 160683*250C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .082 160823*250D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .10 160104*250D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .10 160104*250F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .12 160124*250D–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .12 160124*250F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .15 160154*250E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .15 160154*250F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .18 160184*250E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .18 160184*250F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .22 160224*250F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .27 160274*250G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .33 160334*250G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .39 160394*250H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 .47 160474*250H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 .47 160474*250L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .56 160564*250I–F 0.709 0.335 0.571 0.591 0.031 18.0 8.5 14.5 15.0 0.8 .56 160564*250M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 .68 160684*250I–F 0.709 0.335 0.571 0.591 0.031 18.0 8.5 14.5 15.0 0.8 .68 160684*250M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 .82 160824*250N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 * Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 160 Metallized Polyester Radial Lead Capacitors RoHS Compliant Cap Catalog Inches Millimeters (µF) Part Number L T H S Ød L T H S Ød 250 Vdc 1.0 160105*250N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 1.5 160155*250O–F 1.043 0.394 0.748 0.886 0.031 26.5 10.0 19.0 22.5 0.8 2.2 160225*250P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 3.3 160335*250Q–F 1.260 0.512 0.886 1.083 0.031 32.0 13.0 22.5 27.5 0.8 4.7 160475*250R–F 1.260 0.591 1.181 1.083 0.031 32.0 15.0 30.0 27.5 0.8 6.8 160685*250S–F 1.260 0.709 1.299 1.083 0.031 32.0 18.0 33.0 27.5 0.8 400 Vdc .012 160123*400C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .015 160153*400C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .018 160183*400C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .022 160223*400C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .027 160273*400C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .033 160333*400D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .039 160393*400D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .047 160473*400E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .047 160473*400F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .056 160563*400F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .068 160683*400F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .082 160823*400F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .10 160104*400G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .12 160124*400G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .15 160154*400H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 .15 160154*400L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .18 160184*400L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .22 160224*400L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .27 160274*400M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 .33 160334*400M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 .39 160394*400N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 .47 160474*400N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 .56 160564*400O–F 1.043 0.394 0.748 0.886 0.031 26.5 10.0 19.0 22.5 0.8 .68 160684*400P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 .82 160824*400P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 1.0 160105*400P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 1.0 160105*400Q–F 1.260 0.512 0.886 1.083 0.031 32.0 13.0 22.5 27.5 0.8 630 Vdc .0039 160392*630C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .0047 160472*630C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .0056 160562*630C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .0068 160682*630C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .0082 160822*630C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .010 160103*630C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .012 160123*630D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .015 160153*630D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .018 160183*630D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .022 160223*630E–F 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .027 160273*630F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .033 160333*630F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .039 160393*630G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .047 160473*630G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .056 160563*630G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 * Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 160 Metallized Polyester Radial Lead Capacitors RoHS Compliant Cap Catalog Inches Millimeters (µF) Part Number L T H S Ød L T H S Ød 630 Vdc .068 160683*630H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 .068 160683*630L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .082 160823*630L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .10 160104*630L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .12 160124*630M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 .15 160154*630M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 .18 160184*630N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 .22 160224*630N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 .27 160274*630Q–F 1.260 0.512 0.886 1.083 0.031 32.0 13.0 22.5 27.5 0.8 .33 160334*630P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 .39 160394*630P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 .47 160474*630Q–F 1.260 0.512 0.886 1.083 0.031 32.0 13.0 22.5 27.5 0.8 1000 Vdc .0022 160222*1000C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .0027 160272*1000C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .0033 160332*1000C–F 0.512 0.157 0.374 0.394 0.031 13.0 4.0 9.5 10.0 0.8 .0039 160392*1000D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .0047 160472*1000D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .0056 160562*1000D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .0068 160682*1000D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .0082 160822*1000D–F 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .010 160103*1000F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .012 160123*1000F–F 0.709 0.197 0.433 0.591 0.031 18.0 5.0 11.0 15.0 0.8 .015 160153*1000F–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .018 160183*1000G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .022 160223*1000G–F 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .027 160273*1000H–F 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8 .033 160333*1000L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .039 160393*1000L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .047 160473*1000L–F 1.043 0.236 0.591 0.886 0.031 26.5 6.0 15.0 22.5 0.8 .056 160563*1000M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 .068 160683*1000M–F 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8 .082 160823*1000N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 .10 160104*1000N–F 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 .12 160124*1000O–F 1.043 0.394 0.748 0.886 0.031 26.5 10.0 19.0 22.5 0.8 .15 160154*1000P–F 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8 .18 160184*1000Q–F 1.260 0.512 0.886 1.083 0.031 32.0 13.0 22.5 27.5 0.8 .22 160224*1000Q–F 1.260 0.512 0.886 1.083 0.031 32.0 13.0 22.5 27.5 0.8 * Indicates capacitance tolerance: J = ±5%, K = ±10%, M = ±20% Part Numbering System 160 104 K 100 C –F Case ROHS Series Capacitance Tolerance Voltage Code Compliant 160 392 = .0039 µF J = ±5% 100 = 100 Vdc C 103 = .01 µF K = ±10% 250 = 250 Vdc D 104 = .1 µF M = ±20% 630 = 630 Vdc E 105 = 1.0 µF 1000 = 1000 Vdc F etc. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com

Type 160 Metallized Polyester Radial Lead Capacitors Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the “Information”) in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information con- tained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guaran- tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representa- tion regarding any such matter – and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indi- cated in such warnings, cautions and notes, or that other safety measures may not be required. CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8561 • Fax: (508)996-3830 • www.cde.com