“A” Series Connector A32 Male DIN Style The Anderson™ DIN style “A” Series uses Features the form factor which has been specially configured for North American fast battery • Impact resistant plastic housing charging systems. PA6 (Nylon) housings provide superior impact resistance to stand up to rough usage Unlike other DIN 43589-1 connectors, our “A” Series offers contact and crimp tooling • Up to four auxiliary contacts selections developed for both American Wire Can be used for battery monitoring and charger communications. Last mate - fi rst break, auxiliary Gauge and Metric cable. We also offer a contact sizes available from 10AWG to 18AWG. broader range of auxiliary wire contacts for communication control applications. • Low mating forces Connectors can be mated and unmated without The connector design incorporates an the necessity of added hardware advanced, cost effective contact carrier for ease of assembly and fewer components. • Hexagonal voltage key for All materials are selected to ensure years 24V, 36V, 48V, 72V, 80V, or 96V of reliable service under adverse battery environments. Key prevents mating of different operating voltages Note: Will not mate with “Euro Battery Connector” Series Housings SPECIFICATIONS Electrical Mechanical Current Rating (Amperes) * Life UL 350 a. No Load (mating cycles) >5000 EN1175-1:1998 320 b. Under Load (Hot Plug 5 mating cycles @96V) 800A CSA 270 Voltage Rating Average Mating / Unmating Force (lbf) 12 UL / CSA 600 (N) 53 EN1175-1:1998 150 Degree of Protection IP23 Wire Range Acid Resistence 1.10g / cm³ - Power Contacts - AWG (mm²) #1/0 to #4/0 (50 / 95) Contact Retention - minimum (lbf) 100 - Auxiliary Contacts - AWG (mm²) #18 to #10 (1.5 / 6) (N) 445 Dielectric Withstanding Voltage (AC) 2,200 Materials Average Contact Resistance (micro-ohms) 30 Housing PA6 (Nylon) glass fi lled Operating Temperature (°C) -25° to 105° Contacts Copper alloy, silver plate (°F) -13° to 221° Hardware Steel, zinc chromate plate * Current derating curves must be observed as current capacity will vary dependent on wire cross section and ambient temperature. Maximum current carrying capacity is measured at 40°C / 104°F using the maximum wire cross section permissible, crimped to contacts using APP recommended tooling. ORDERING INFORMATION Connector Part Number Selection Accessories Main Coding Series Gender Contact Handle Key Auxiliary Contacts Packaging Part A32 4 01 - 1 0 B 9 Number Description 160-12 #10 (6mm²) Lower aux contact 4 Plug 9 Individual 160-14 #12 (4mm²) Upper aux contact 16-89 Handle kit - low profi le 00 None - Order Separately 0 None 8 Bulk 32-89 Handle kit - high profi le 01 #1/0 AWG / 50 mm² A (2) Lower Auxiliary Contacts (320-22) A320LP-MK Latch plate for mating side 02 #2/0 AWG / 70 mm² B (2) Upper Auxiliary Contacts (320-24) A320HL-MK Handle with latch & hardware 994G4 Manual release bracket & handle 03 #3/0 AWG / 95 mm² C (2) Lower Auxiliary Contacts & (320-22) 993G4 Manual release mounting plate for 04 #4/0 AWG 0 Grey, Wet Cell (2) Upper Auxiliary Contacts (320-24) mating half 0 No 2 Green, Dry Cell 1 Black 3 Yellow, Universal

ORDERING INFORMATION TEMPERATURE CHARTS Tooling “A” Series - A32 Temperature Rise Part 50 Number Description 45 1309G4 Hand tool for auxiliary contacts #14/18 AWG (2.5 / 2.5 mm²) C) 40 1E318670G-336 HExytdrraacutiloicn t otoool lfor power contacts ature (° 233505 Note: For tooling die information, see tooling chart on website er 20 DIMENSIONS mp 15 e 10 T 5 Pin Contact 0 0 50 100 150 200 250 300 350 400 Part - Wire - - Ø A - - Ø B - Current (A) Number AWG mm² in. mm in. mm 320-1050 #1/0 50 0.57 14.5 0.43 11.0 50mm² 70mm² 95mm² #4/0 AWG 320-1070 #2/0 70 0.67 17.0 0.51 13.0 Note: Temperature ratings based on Power Contacts energized only 320-1095 #3/0 95 0.78 19.8 0.59 15.0 320-1004 #4/0 N/A 0.78 19.8 0.61 15.6 “A” Series - A32 Derating Curve [ 85.5 ] Ø A (0.8 Derating per IEC 60512-3) 3.37 Ø B C)120 ° e (100 atur 80 er p 60 Upper Auxiliary Contact m Te 40 PNaurmt ber A W G - Wire - mm² i n .- Ø Am - m i n- .Ø B m- m ent 20 bi 160-14 #12 4 0.16 4.1 0.11 2.8 m 0 320-24 #18 / 14 1.5 / 2.5 0.18 4.6 0.09 2.2 A 0 50 100 150 200 250 300 Current (A) [ 30.1 ] ØA 1.19 Ø B 50mm² 70mm² 95mm² #4/0 AWG Note: Temperature ratings based on Power Contacts energized only Housing Side View Lower Auxiliary Contact [ 122.5 ] Part - Wire - - Ø A - - Ø B - 4.82 Number AWG mm² in. mm in. mm 160-12 #10 6 0.20 5.1 0.15 3.8 [ 40.3 ] REF 320-22 #18 / 14 1.5 / 2.5 0.18 4.6 0.09 2.2 1.59 ØA [ 36.0 ] Ø B 1.42 Handle / Lever Assembly / Latch Housing Front View Housing Top View Handle & Lever Assembly Upper Auxiliary Contacts [ 54.0 ] [ 24.0 ] 2.13 0.94 Main Main Mounting Hardware Power Power Contact Contact Latch Plate [ 69.0 ] [ 89.0 ] 2.72 3.50 Ø[ 6.6 ] (4) Lower Auxiliary Contacts 0.26 © 2017 Anderson Power Products, Inc. All rights reserved. APP®, Anderson Power Products® and the APP Logo are registered trademarks of Anderson Power Products, Inc. Anderson™ is a trademark of Anderson Power Products, Inc. All data Subject To Change Without Notice 2017-0054 DS-A32EBCM REV 8 HEADQUARTERS: Anderson Power Products®, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-0128 • EUROPE: Anderson Power Products® Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390 F: +44 (0) 1925 520203 • ASIA / PACIFIC: IDEAL Anderson Asia Pacifi c Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852) 2636 0836 F:+(852) 2635 9036 • CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District, Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218 • TAIWAN: IDEAL Anderson Asia Pacifi c Ltd., Taiwan Branch, 4F.-2, No.116, Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460 • www.andersonpower.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: A nderson Power Products: 160-12 160-14 320-1095