“Stay Connected with Heyco” Liquid Tight Cordgrips Heyco® Liquid Tight Cordgrips INSTALLATION INSTRUCTIONS for THREADED mounting holes: For torque information, see page 3-50 or visit the Cordgrips section on www.heyco.com. 1. Be sure that hole is free of burrs and panel surface around hole is smooth and free of debris. 2. Using the hex portion on the body (not the sealing nut), screw the fitting tightly into the threaded mounting hole. 3. Insert the cable through the fitting to the desired position. 4. Hand-tighten the SEALING nut as far as possible. Hold the BODY hex stationary with a wrench. Using a second wrench, tighten the SEALING nut until the wire is securely held in place. 5. Using a wrench on the BODY hex, check to make sure the fitting is still screwed tightly into the panel. 6. To disassemble for cable replacement, use a wrench to hold the BODY hex stationary and loosen the SEALING nut with a second wrench. Grip the disconnected cable and pull while turning the cable in the counter- clockwise direction. Heyco-Tite Original Series-35 SEALING NUT BODY HEX INTEGRAL LOCKNUT SEALING NUT BODY HEX LOCKNUT SEALING RING (optional with NPT thread) (optional with NPT thread) Heyco® PG Thread Taps For Steel Conduit Threads per DIN 40430* THREAD TYPE TAP DRILL DESCRIPTION PART NO. PART DIMENSIONS •Use a starting tap for through-hole AND SIZE DIAMETER Starting Finishing Major Length applications. mm. Diameter Overall Thread •For blind holes, thread first with a mm. mm. mm. starting tap; finish bottoming the threads with a finishing tap. PG 7 11,5 PG T 7 0150 0151 12,5 63,0 20,0 PG 9 14,0 PG T 9 0153 0154 15,2 70,0 20,0 •Flank angle 80°. PG 11 17,3 PG T 11 0156 0157 18,6 80,0 22,0 •Made of high-speed steel with PG 13.5 19,0 PG T 13.5 0159 0160 20,4 80,0 22,0 ground threads for greater accuracy PG 16 21,3 PG T 16 0162 0163 22,5 80,0 22,0 to assure optimum performance. PG 21 27,0 PG T 21 0165 0166 28,3 90,0 22,0 •Suitable for cutting alloy steel, PG 29 35,5 PG T 29 0168 0169 37,0 110,0 25,0 bronze, and stainless. *See page 3-49 for DIN 40430 Specifications. 3-48 1-800-526-4182 • 732-286-1800 (NJ) • FAX: 732-244-8843 • www.heyco.com

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: H eyco: 0150 0151 0156 0160 0159 0153 162 0162