Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties Test conditions Value Unit Polarity Mark noursmeal 1,6 PPoeawke rF oDriwssairpda tCiounrrent IPDiss duty/ 10 @ 1 kHz 16000 mmWA (Cathode) F Peak 1 2 Continuous Forward Current I 25 mA F 1 1 2 ±0, 1,5 2 1,5 Reverse Voltage VREV 5 V 1,4 0,8 2,5 0,8 ESD Threshold/ Human Body V 2000 V Model ESD HBM 0,5 typ. p. 3,2±0,1 ty Optical Properties: 45 reverse R1,4 0, use 1,6 Chip Technology AlInGaP Emitting Color Red 1 2 Lens Type Rectangular 1,4±0,1 O 2,3 Scale - 10:1 1 0, ± 0,4 ±0,1 Schematic: 2 1, General Information: Operating Temperature -40 up to +85 °C 3,2±0,1 Storage Conditions (in original < 40 °C ; < 90 % RH packaging) - + 1 2 1 Storage Conditions (for single 1 2 ±0, parts) -40 up to +85 °C 6 1, Moisture Sensitivity Level (MSL) 3 Scale - 10:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.000 2019-06-07 DIN ISO 2768-1m DESCRIPTION WL-SMRW SMT Mono-color WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Reverse mount Waterclear ORDER CODE Max-Eyth-Str. 1 156120RS75000 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 1206 cylindrical eiPal Valid 1/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Electrical & Optical Properties: Viewing Angle: Value Properties Test conditions Unit min. typ. max. Peak Wavelength λ 20 mA 632 nm Peak Dominant Wavelength λ 20 mA 624 nm Dom Luminous Intensity I 20 mA 35 60 mcd V Forward Voltage V 20 mA 2 2.4 V F Spectral Bandwidth Δλ 20 mA 15 nm Reverse Current I 5 V 10 µA REV Viewing Angle Phi 0° 2θ50% 20 mA 140 ° 100 -70° 0° 10° 20° Certification: 90 30° RoHS Approval Compliant [ 2011/65/EU&2015/863 ] 80 40° %) 45° REACh Approval Conform or declared [ (EC)1907/2006 ] sity ( 70 Halogen Free Conform [ IEC 61249-2-21 ] nten 60 50° s I u no 50 60° mi u e L 40 elativ 30 70° R 20 80° 10 90° -90 -45 0 10 20 30 40 50 60 70 80 90 100 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.000 2019-06-07 DIN ISO 2768-1m DESCRIPTION WL-SMRW SMT Mono-color WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Reverse mount Waterclear ORDER CODE Max-Eyth-Str. 1 156120RS75000 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 1206 cylindrical eiPal Valid 2/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Spectral: Forward Current vs. Forward Voltage: 35 30 100 25 80 A] m %] nsity [ 60 ent [ 20 nte rr ve I Cu Relati 40 ard 15 w r o 20 F 10 0 400 450 500 550 600 650 700 750 Wavelength [nm] 5 0 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.000 2019-06-07 DIN ISO 2768-1m DESCRIPTION WL-SMRW SMT Mono-color WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Reverse mount Waterclear ORDER CODE Max-Eyth-Str. 1 156120RS75000 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 1206 cylindrical eiPal Valid 3/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Luminous Intensity vs. Forward Current: Derating Curve: 30 100 90 25 80 70 20 ] A]A] d mm c m [[ y [ 60 ent ent sit urrurr 15 n CC nte 50 d d s I warwar u no 40 ForFor 10 mi u L 30 5 20 10 0 0 20 40 60 80 100 0 AAmmbbiieenntt TTeemmppeerraattuurree[[°°CC]] 0 5 10 15 20 25 30 35 Forward Current [mA] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.000 2019-06-07 DIN ISO 2768-1m DESCRIPTION WL-SMRW SMT Mono-color WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Reverse mount Waterclear ORDER CODE Max-Eyth-Str. 1 156120RS75000 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 1206 cylindrical eiPal Valid 4/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Packaging Specification - Tape and Reel: [mm] W3 P0 D0 P2 T W1 close to center B 1 D E A N C F W 2 0 E B W2 top cover tape D1 A0 K0 T1 P1 T2 detail B Carrier tape B End Feeding direction Start Cover Tape Cover tape Chip Cavity Sprocket Hole Embossment No Component Components No Component min. 160 mm min. 100 mm Cover Tape min. 400 mm A B C D N W1 W2 W3 W3 tolerance min. ± 0,8 min. min. ± 1,5 max. min. max. A0 B0 W T T1 T2 K0 P0 P1 P2 D0 D1 E1 E2 F Tape Type 2a VPE / packaging unit Tape width 8mm 178 1.5 13 20.2 50 8.4 14.4 7.9 10.9 typ. typ. +0,3/ -0,1 ref. max. typ. typ. ±0,1 ±0,1 ±0,05 +0,1/ -0,0 min. ±0,1 min. ±0,05 pcs. 1.71 3.53 8 0.23 0.1 1.4 1.37 4 4 2 1.5 0.3 1.75 6.25 3.5 Polystyrene 2000 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.000 2019-06-07 DIN ISO 2768-1m 165° - 180° DESCRIPTION WL-SMRW SMT Mono-color WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Reverse mount Waterclear ORDER CODE Max-Eyth-Str. 1 156120RS75000 74638 Waldenburg Germany Pull-of force Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com Tape width 8 mm 0,1 N - 1,0 N eiSos@we-online.com 1206 cylindrical eiPal Valid 5/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Value Preheat Temperature Min T 150 °C s min Preheat Temperature Max T 200 °C s max T p t TC –5°C Preheat Time ts from Ts min to Ts max ts max. 60 - 120 seconds Max. Ramp Up Rate p Ramp-up Rate (T to T ) 3 °C/ second max. L P Max. Ramp Down Rate Liquidous Temperature T 217 °C L TL Time tL maintained above TL tL max. 60 seconds t Ts max Preheat Area L Peak package body temperature Tp see table e Time within 5°C of actual peak temperaure t max. 10 seconds r p u at Ramp-down Rate (TL to TP) 6 °C/ second max. er T Time 25°C to peak temperature max. 220 seconds p s min m refer to IPC/ JEDEC J-STD-020E e T tS Package Classification Reflow Temperature: Volume mm³ Volume mm³ Volume mm³ Properties <350 350-2000 >2000 PB-Free Assembly | Package Thickness < 1.6 mm 260 °C 260 °C 260 °C 25 Time 25°C to Peak PB-Free Assembly | Package Thickness 1.6 mm - 2.5 mm 260 °C 250 °C 245 °C PB-Free Assembly | Package Thickness ≥ 2.5 mm 250 °C 245 °C 245 °C Time Applied cycles 2 cycles max. refer to IPC/ JEDEC J-STD-020E CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.000 2019-06-07 DIN ISO 2768-1m DESCRIPTION WL-SMRW SMT Mono-color WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Reverse mount Waterclear ORDER CODE Max-Eyth-Str. 1 156120RS75000 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 1206 cylindrical eiPal Valid 6/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Cautions and Warnings: • If the product is potted in the customer application, the potting material may shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the optoelectronic component body, pins or termination. Expansion could damage the optoelectronic component body, pins or termination. We recommend a manual inspection after potting to avoid these The following conditions apply to all goods within the product series of Optoelectronic effects. Components of Würth Elektronik eiSos GmbH & Co. KG: Storage Conditions: General: • A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer • This optoelectronic component is designed and manufactured for use in general electronic equipment. degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of • Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any shipment. equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, • Do not expose the optoelectronic component to direct sunlight. ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are • The storage conditions in the original packaging are defined according to DIN EN 61760-2. especially required and/or if there is the possibility of direct damage or human injury. • For a moisture sensitive component, the storage condition in the original packaging is defined according to IPC/JEDEC-J-STD-033. It is • Optoelectronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer. also recommended to return the optoelectronic component to the original moisture proof bag and reseal the moisture proof bag again. • The optoelectronic component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the component may be damaged or dissolved. Handling: • Do not drop or impact the components, as the optoelectronic component body may flake apart. • Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth • Violation of the technical product specifications such as exceeding the nominal rated current, will void the warranty. Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and • The product design may influence the automatic optical inspection. sustainability over time. • Certain optoelectronic component surfaces consist of soft material. Pressure on the top surface has to be handled carefully to prevent • The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the negative influence to the function and reliability of the optoelectronic components. authority of the customer. All technical specifications for standard products also apply to customer specific products. • ESD prevention methods need to be applied for manual handling and processing by machinery. • Resistors for protection are obligatory. Product specific: • Luminaires in operation may harm human vision or skin on a photo-biological level. Therefore direct light impact shall be avoided. All products are additionally certified as risk groups 0 to 2 according to DIN EN 62471:2008. Soldering: • In addition to optoelectronic components testing, products incorporating these devices have to comply with the safety precautions given in IEC 60825-1 and IEC 62471. • The solder profile must comply with the Würth Elektronik technical soldering specification. All other profiles will void the warranty. • All other soldering methods are at the customers’ own risk. Technical specification: Cleaning and Washing: • The typical and/or calculated values of technical parameters can only reflect statistical figures. The actual parameters of each single product, may differ from the typical and/or calculated values or the typical characteristic line. • On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and forward • Washing agents used during the production to clean the customer application might damage or change the characteristics of the voltage. optoelectronic component body, marking or plating. Washing agents may have a negative effect on the long-term functionality of the • In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered. Please contact us product. in advance, if you need a particular bin sorting before placing your order to clarify the lead time, MOQ and pricing. • Using a brush during the cleaning process may break the optoelectronic component body. Therefore, we do not recommend using a brush during the PCB cleaning process. These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable. However, no responsibility is assumed for inaccuracies or incompleteness. Potting: CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.000 2019-06-07 DIN ISO 2768-1m DESCRIPTION WL-SMRW SMT Mono-color WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Reverse mount Waterclear ORDER CODE Max-Eyth-Str. 1 156120RS75000 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 1206 cylindrical eiPal Valid 7/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Important Notes 6. Product Life Cycle Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a The following conditions apply to all goods within the product range of Würth Elektronik standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage eiSos GmbH & Co. KG: about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product 1. General Customer Responsibility availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the 7. Property Rights areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth characteristics described in the product specification is valid and suitable for the respective customer application or not. Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, 2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime 8. General Terms and Conditions cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable Elektronik eiSos Group”, last version available at www.we-online.com. design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 3. Best Care and Attention Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 4. Customer Support for Product Specifications Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 5. Product R&D Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD PLD 002.000 2019-06-07 DIN ISO 2768-1m DESCRIPTION WL-SMRW SMT Mono-color WEMüCrt h& E Ilnedkutrcotnivike eSioSlousti oGnmsbH & Co. KG Reverse mount Waterclear ORDER CODE Max-Eyth-Str. 1 156120RS75000 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 SIZE/TYPE BUSINESS UNIT STATUS PAGE www.we-online.com eiSos@we-online.com 1206 cylindrical eiPal Valid 8/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: W urth Electronics: 156120RS75000