8 7 6 5 4 3 2 1 NOTES 3MTM LATCH/EJECT HEADER, 1552 SERIES 1. MATERIAL: PLASTIC: 2MM X 2MM STRAIGHT & RIGHT ANGLE, THROUGH-HOLE, STRAIGHT & SURFACE MOUNT GLASS FILLED POLYESTER (LCP) UL94V-0, BLACK CONTACT: COPPER ALLOY. 2. PLATING: 50 NICKEL UNDERPLATING WIPE AREA: SEE ORDERING INFO. SOLDER TAIL: 200 MATTE TIN. .44 3 IN THE EVENT OF CONFLICT D D .22 .29 BETWEEN THIS DATA AND THAT 11.1 5.5 7.4 CONTAINED IN THE PRODUCT SPECIFICATION, THE PRODUCT .73 SPECIFICATION TAKES PRECEDENT. .59 .59 4. REGULATORY INFORMATION: 18.5 VISIT 3M.com/regs OR CONTACT 15.0 15.0 YOUR 3M REPRESENTATIVE TO FIND THE RoHS COMPLIANCE STATUS OF THE 3M PART YOU ARE INTERESTED IN. 5 SEE TABLE 1 FOR LATCH .31 AVAILABILITY. .18 4.6 .18 4.6 7.9 6. MATING COMPATIBILITY SERIES: 1552XX-X40X 1522, 870, 2M AND 2MM SCI 5 LATCH MATING FOR CARRIER (93XX). 1552XX-X20X 5 5 1552XX-X30X 2MM SCI CARRIER 7 SURFACE MOUNT VERSION: LATCH MATING FOR LATCH MATING FOR ORDER CODE APPLIES TO THE MOLDED-ON SOCKET PRESS-ON SOCKET TAPE AND REEL WIDTH. WITH LATCHING EAR * 14 PIN COUNTS RANGING FROM 06 TO 50 POSITIONS. C * LATCH/EJECT MECHANISM SECURELY LATCHES TO SOCKET. C * ROLL PINS RETAIN LATCHES TO BODY IN SHIPPING AND ELECTRICAL PERFORMANCE: HIGH VIBRATION ENVIRONMENTS. 3 * EJECTOR HELPS MAKE UNMATING OF CABLE ASSEMBLIES CURRENT RATING: 4.75A, 1 LINE POWERED EASIER. 2.00A, 6 ADJACENT LINES POWERED * HIGH TEMPERATURE INSULATORS SUITABLE FOR LEAD FREE 1.25A, ALL LINES POWERED PROCESSING. RATING CONDITIONS: EIA-364-070 METHOD 2, 30 C MAXIMUM TEMPERATURE * ROBUST SYSTEM SOLUTION WHEN USED WITH 3M IDC RISE, 20% DERATED. REFERENCE APPROPRIATE 3M PRODUCT WIREMOUNT SOCKETS OR 3M MOLDED CABLE ASSEMBLIES. SPECIFICATION FOR DETAILED CURRENT DERATING CURVES. * SMT LATCH/EJECT HEADERS ARE AVAILABLE IN TAPE AND REEL WITH VACUUM CAP FOR AUTOMATIC PLACEMENT. INSULATION RESISTANCE: > 1X109 OHMS AT 500 V DC WITHSTANDING VOLTAGE (1552XX): 1000 V AT SEA LEVEL RMS WITHSTANDING VOLTAGE (G1552XX): 750 V AT SEA LEVEL N O RMS LSI VI E R ENVIRONMENTAL: 3 7 - 9 TEMPERATURE RATING: -55 C TO +105 C 9 1 PROCESS RATING: MAXIMUM 260 C (PER J-STD-020) 2 - MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020) DIM. "A" .008 00BER M 1U DIM. "A" .20 5G N -N 8WI A 7R D DIM. "D" .006 7 B DIM. "D" .15 B .079 TABLE 1 CONTACT LATCH TAPE ORDER CONTACT 2.00 DIM. "A" DIM. "B" DIM. "D" .247 QTY. OPTION WIDTH CODE QTY. 6.27 06 .673 [17.09] .157 [4.00] .333 [8.45] 2, 4 44 MM WD 06 08 .752 [19.10] .236 [6.00] .411 [10.44] 2, 4 44 MM WD 08 10 .831 [21.10] .315 [8.00] .490 [12.45] 2, 3, 4 44 MM WD 10 .079 2.00 .163 4.14 12 .910 [23.10] .394 [10.00] .569 [14.45] 3, 4 44 MM WD 12 16 1.067 [27.10] .551 [14.00] .726 [18.44] 2, 4 56 MM WE 16 TYP. t e 20 1.224 [31.09] .709 [18.00] .884 [22.45] 2, 3, 4 56 MM WE 20 s f POSITION #1 f 22 1.303 [33.10] .787 [20.00] .963 [24.46] 2, 4 56 MM WE 22 .26 O ORIENTATION 24 1.382 [35.10] .866 [22.00] 1.041 [26.44] 2, 4 56 MM WE 24 C TRIANGLE 6.7 T 26 1.461 [37.10] .945 [24.00] 1.120 [28.45] 2, 3, 4 72 MM WF 26 U 7 30 1.618 [41.10] 1.102 [28.00] 1.278 [32.46] 2, 4 72 MM WF 30 L 58601 AUG 11,2016 JNC RS 1 0 2 34 1.774 [45.09] 1.260 [32.00] 1.435 [36.46] 2, 4 72 MM WF 34 8-11-16 ADD SHT 4 / 7 .425 REVISE TRADEMAKE NOTE 1 40 2.012 [51.10] 1.496 [38.00] 1.671 [42.44] 2, 3, 4 72 MM WF 40 / JUN 01,2016 5 10.80 DIMENSIONS: MM [INCHES] e 44 2.169 [55.09] 1.654 [42.00] 1.829 [46.46] 2, 3, 4 88 MM WG 44 PRODUCTION RELEASE, m APR 29,2016 i 50 2.405 [61.09] 1.980 [48.00] 2.065 [54.45] 2, 3, 4 88 MM WG 50 T DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE JAN 21,2015 d A CHKD DATE APPVL DATE An R. SCHERER JAN 21,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2017 t EMSD 3M Center This document and the information it contains are S .020 SQ. DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t 0.51 n INCHES TITLE TYPICAL CONNECTOR DIMENSIONS LATCH/EJECT HEADER, e 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION .0 C FOR THE HEADERS ON THIS DRAWING TYP. .00 .01 INTERCONNECT SOLUTIONS 2MM, STRAIGHT, RIGHT .000 .008 6 (EXCEPT AS NOTED) http://www.3mconnectors.com THIRD ANGLE PROJECTION .0000 . ANGLE & SMT L INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d 3M IS A TRADEMARK OF 3M COMPANY. .0 .3 e FOR TECHNICAL, SALES OR ORDERING MAX SURFACE ROUGHNESS .00 .20 NCUMAGBEER SIZE7DR8AWIN-G5 NO1. 00-2199-7 RLEV. ag INFORMATION CALL 800-225-5373 ALL SURFACES .000 m MARKED ONLY ANGLES MODEL1552 DLIESTT.S YES NO SHT 1 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM LATCH/EJECT HEADER, 1552 SERIES STRAIGHT VERSION WITH INTERSTITIAL GROUNDS 2MM X 2MM STRAIGHT & RIGHT ANGLE, THROUGH-HOLE, STRAIGHT & SURFACE MOUNT STRAIGHT VERSION D D .039 1.00 .15 3.8 .148 .010 3.75 0.25 CENTER GROUND .15 3.8 .080 .010 DIM. "E" .010 DIM. "D" .006 .039 .006 2.03 0.25 DIM. "E" .25 DIM. "E" .010 DIM. "D" .15 1.00 0.15 CENTER GROUND SEE ORDERING DIM. "E" .25 DIM. "B" .006 INFO. TYP. SEE ORDERING DIM. "B" .15 INFO C C DIM. "B" .006 DIM. "B" .15 DIM. "B" .006 DIM. "B" .15 .079 .003 .787 .079 .003 2.00 0.08 20.00 2.00 0.08 TYP. .032 .003 TYP. .787 0.81 0.08 .039 .003 .079 .003 20.00 N AFTER PLATING O LSI 1.00 0.08 2.00 0.08 TYP. EVI R .079 .003 TYP. 7 - 2.00 0.08 .079 .003 9 9 1 2.00 0.08 2 - .036 .003 RECOMMENDED PC BOARD PATTERN 00BER M 1U 0.91 0.08 (VIEWED FROM CONNECTOR SIDE) 5G N -N 8WI A AFTER PLATING .039 .003 7DR TYP. 1.00 0.08 .036 .003 B B 0.91 0.08 RECOMMENDED PC BOARD PATTERN AFTER PLATING (VIEWED FROM CONNECTOR SIDE) TYP. ORDERING INFORMATION ORDERING INFORMATION 1552XX-6X0X-XX t G1552XX-6X0X-XX e s CONTACT QUANTITY: PLATING OPTIONS: f CONTACT QUANTITY: PLATING OPTIONS: Of RB = 30 IN [.76 m] GOLD LATCHING OPTIONS: RA = 10 IN [.25 m] GOLD RB = 30 IN [.76 m] GOLD C LATCHING OPTIONS: RA = 10 IN [.25 m] GOLD 2 = LATCH, MOLDED-ON SOCKET WITH (RIA E1 & C1 APPLY) FOR T 4 = LATCH, 2MM SCI CARRIER ONLY, (RIA E1 & C1 APPLY) FOR U LATCHING EARS, SERIES: 870, 2MM BOTH PLATINGS 7 3 = LATCH, PRESS-ON SOCKET, SERIES: 1522 SERIES 93XX BOTH PLATINGS L 58601 AUG 11,2016 JNC RS 1 0 4 = LATCH, 2MM SCI CARRIER ONLY, 8-11-16 ADD SHT 4 2 SOLDER TAIL LENGTH: / 7 SERIES: 93XX SOLDER TAIL LENGTH: DIMENSION "E" REVISE TRADEMAKE NOTE 1 DIMENSION "E" JUN 01,2016 5/ 2 = .112 [2.84] e 2 = .112 [2.84] 3 = .155 [3.94] PRODUCTION RELEASE, m APR 29,2016 i T DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE JAN 21,2015 d A CHKD DATE APPVL DATE An R. SCHERER JAN 21,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2017 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE e LATCH/EJECT HEADER, .0 C .00 .01 2MM, STRAIGHT, RIGHT .000 .008 6 THIRD ANGLE PROJECTION .0000 . ANGLE & SMT L INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .20 NUMBER 78-5100-2199-7 L a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL1552 DLIESTT.S YES NO SHT 2 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM LATCH/EJECT HEADER, 1552 SERIES 2MM X 2MM STRAIGHT & RIGHT ANGLE, THROUGH-HOLE, STRAIGHT & SURFACE MOUNT SURFACE MOUNT VERSION NOTES: RIGHT ANGLE VERSION 1) TAPE & REEL PARTS ALWAYS SUPPLIED WITH VACUUM PICK-UP CAP. 2) TAPE & REEL NOT AVAILABLE WITH SCI LATCH OPTION. 3) TRAY PARTS SUPPLIED WITHOUT VACUUM PICK-UP CAP. D D VACUUM CAP .15 3.8 .51 .15 12.9 3.8 .079 2.00 DIM. "E" .01 DIM. "B" .006 DIM. "E" .25 DIM. "B" .006 .320 .010 DIM. "B" .15 DIM. "B" .15 8.13 0.25 .079 .003 C .034 0.86 C 2.00 0.08 TYP. .33 8.5 TYP. EDGE OF .036 .003 PC BOARD 0.91 0.08 .079 .003 AFTER PLATING 2.00 0.08 TYP. TYP. .394 N .366 O LSI VI E 9.30 10.01 R 7 .079 .003 - 9 9 2.00 0.08 1 DIM. "B" .006 .787 .150 -2 0R 0BE DIM. "B" .15 20.00 3.81 DIM. "B" .006 1UM 5G N -N TYP. DIM. "B" .15 8AWI 7R D RECOMMENDED PC BOARD PATTERN RECOMMENDED PC BOARD PATTERN (VIEWED FROM CONNECTOR SIDE) B (VIEWED FROM CONNECTOR SIDE) B ORDERING INFORMATION 1552XX-2X00-XX-XX ORDERING INFORMATION CONTACT QUANTITY: PACKAGING: 1552XX-5X0X-XX BLANK = TRAYS t e LATCHING OPTIONS: WX = TAPE & REEL s CONTACT QUANTITY: PLATING OPTIONS: 2 = LATCH, MOLDED-ON SOCKET WITH (SEE TABLE 1 ORDER CODE) f f O RB = 30 IN [.76 m] GOLD LATCHING EARS, SERIES: 870, 2MM LATCHING OPTIONS: RA = 10 IN [.25 m] GOLD 3 = LATCH, PRESS-ON SOCKET, SERIES: 1522 C 2 = LATCH, MOLDED-ON SOCKET WITH (RIA E1 & C1 APPLY) FOR 4 = LATCH, 2MM SCI CARRIER ONLY, T U LATCHING EARS, SERIES: 870, 2MM BOTH PLATINGS SERIES 93XX 7 3 = LATCH, PRESS-ON SOCKET, SERIES: 1522 L 58601 AUG 11,2016 JNC RS 1 PLATING OPTIONS: 0 4 = LATCH, 2MM SCI CARRIER ONLY, 8-11-16 ADD SHT 4 2 SOLDER TAIL LENGTH: RB = 30 IN [.76 m] GOLD / 7 SERIES 93XX DIMENSION "E" RA = 10 IN [.25 m] GOLD REVISE TRADEMAKE NOTE 1 / JUN 01,2016 5 2 = .112 [2.84] (RIA E1 & C1 APPLY) FOR e 3 = .155 [3.94] BOTH PLATINGS PRODUCTION RELEASE, m APR 29,2016 i T DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE JAN 21,2015 d A CHKD DATE APPVL DATE An R. SCHERER JAN 21,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2017 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 4 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE e LATCH/EJECT HEADER, .0 C .00 .01 2MM, STRAIGHT, RIGHT .000 .008 6 THIRD ANGLE PROJECTION .0000 . ANGLE & SMT L INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .20 NUMBER 78-5100-2199-7 L a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL1552 DLIESTT.S YES NO SHT 3 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM LATCH/EJECT HEADER, 1552 SERIES 2MM X 2MM STRAIGHT & RIGHT ANGLE, THROUGH-HOLE, STRAIGHT & SURFACE MOUNT D D Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. C C Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M's option, replacement of N O the 3M product or refund of the purchase price. LVISI E R Limitation of Liability: Except where prohibited by law, 7 3M will not be liable for any loss or damage arising from the 9- 9 3M product, whether direct, indirect, special, incidental or 1 2 consequential, regardless of the legal theory asserted, - 0R including warranty, contract, negligence or strict liability. 0BE M 1U 5G N -N Unless otherwise noted, references to indrustry specifications 8WI A 7R are intended to indicate substantial compliance to the material D elements of the specification. Such references should not be construed as a guarantee of compliance to all requirements in a B B given specification. t e s f f O C T U 7 L 58601 AUG 11,2016 JNC RS 1 0 2 8-11-16 ADD SHT 4 / 7 REVISE TRADEMAKE NOTE 1 / JUN 01,2016 5 e PRODUCTION RELEASE, m APR 29,2016 i T DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE JAN 21,2015 d A CHKD DATE APPVL DATE An R. SCHERER JAN 21,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2017 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 1 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE e LATCH/EJECT HEADER, .0 C .00 .01 2MM, STRAIGHT, RIGHT .000 .008 6 THIRD ANGLE PROJECTION .0000 . ANGLE & SMT L INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .20 NUMBER 78-5100-2199-7 L a ALL SURFACES .000 m MARKED ONLY ANGLES MODEL1552 DLIESTT.S YES NO SHT 4 OF 4 I 8 7 6 5 4 3 2 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3 M: 155206-2200-RB 155206-5203-RB 155206-6202-RB 155206-6203-RB 155208-2200-RB 155208-5202-RB 155208-5203-RB 155208-6202-RB 155208-6203-RB 155210-2200-RB 155210-2300-RB 155210-5202-RB 155210- 5203-RB 155210-5302-RB 155210-5303-RB 155210-6202-RB 155210-6203-RB 155210-6302-RB 155210-6303-RB 155212-2300-RB 155212-5302-RB 155212-5303-RB 155212-6302-RB 155212-6303-RB 155216-2200-RB 155216-5202-RB 155216-5203-RB 155216-6202-RB 155216-6203-RB 155220-2200-RB 155220-2300-RB 155220- 5202-RB 155220-5203-RB 155220-5302-RB 155220-5303-RB 155220-6202-RB 155220-6203-RB 155220-6302-RB 155220-6303-RB 155222-2200-RB 155222-5202-RB 155222-5203-RB 155222-6202-RB 155222-6203-RB 155224-2200-RB 155224-5202-RB 155224-5203-RB 155224-6202-RB 155224-6203-RB 155226-2200-RB 155226- 2300-RB 155226-5202-RB 155226-5203-RB 155226-5302-RB 155226-5303-RB 155226-6202-RB 155226-6203-RB 155226-6302-RB 155226-6303-RB 155206-5202-RB 155230-2200-RB 155230-5202-RB 155230-5203-RB 155230-6202-RB 155230-6203-RB 155240-2200-RB 155240-2300-RB 155240-5202-RB 155240-5203-RB 155240- 5302-RB 155240-5303-RB 155240-6202-RB 155240-6203-RB 155240-6302-RB 155240-6303-RB 155244-2200-RB 155244-2300-RB 155244-5202-RB 155244-5203-RB 155244-5302-RB 155244-5303-RB 155244-6202-RB 155244-6203-RB 155244-6302-RB 155244-6303-RB 155250-2200-RB 155250-2300-RB 155250-5202-RB 155250- 5203-RB 155250-5302-RB 155250-5303-RB 155250-6202-RB 155250-6203-RB 155250-6302-RB 155250-6303-RB 155234-5202-RA 155234-6203-RB 155234-6202-RA 155234-6202-RB 155234-2200-RA