8 7 6 5 4 3 2 1 NOTES 3MTM BOARDMOUNT SOCKET, 1502 SERIES 1. REGULATORY INFORMATION: ROHS COMPLIANT. SEE THE 2.00MM X 2.00MM STRAIGHT AND SURFACE MOUNT, PLATED THROUGH HOLE REGULATORY INFORMATION APPENDIX (RIA) IN THE "ROHS COMPLIANCE" SECTION OF WWW.3MCONNECTORS.COM FOR COMPLIANCE INFORMATION. 2 IN THE EVENT OF CONFLICT BETWEEN THIS DATA AND THAT CONTAINED IN THE PRODUCT D D SPECIFICATION, THE PRODUCT SPECIFICATION TAKES PRECEDENT. 3 TAPE & REEL INCLUDE VACUUM PICK-UP CAP FOR PICK 'n PLACE HANDLING EQUIPMENT. 4 PARTS IN TRAY PACKAGING ARE SUPPLIED WITHOUT VACUUM CAP. 5 POSITIONS PER ROW, SUBTRACT 1, MULTIPLY BY 2MM SPACING. 6 OPTIONAL LOCATOR POSTS: POSITIONS PER ROW, MULTIPLY BY 2MM SPACING, THEN SUBTRACT 4MM. POSTS ARE ONLY AVAILABLE FOR POSITIONS 08 AND GREATER. PHYSICAL: 2 C C INSULATOR: MATERIAL: HIGH TEMP THERMOPLASTIC CONTACT: MATERIAL: COPPER ALLOY PLATING: UNDER PLATING: 1.27-3.8 m {50-150 "} NICKEL-OVERALL STRAIGHT WIPING AREA: .76 m {30 "} GOLD SOLDER TAILS: 5.1 m [200 "] MATTE TIN (RIA E1 & C1 APPLY) VERSION MARKING: ORIENTATION DELTA AND 3M LOGO (EXCEPT SURFACE MOUNT) ELECTRICAL: 2 N O KSI CURRENT RATING: 1A VI E R VOLTAGE RATING: 150V PER EIA-364-20 AC 8 INSULATION RESISTANCE: >1 X 109 OHm AT 250V - DC 9 WITHSTANDING VOLTAGE: 500V AT SEA LEVEL 1 DC 5 0 - 0R 0BE ENVIRONMENTAL: M 2 1U 5G N -N 8WI TEMPERATURE RATING: -55 C TO 105 C 7RA D PROCESS RATING: MAX. 260 C (PER J-STD-020C) MOISTURE SENSITIVITY LEVEL: 1 (PER J-STD-020C) B B SURFACE MOUNT VERSION t e s f f O C T U 7 1 0 2 / 7 / 2 K 63282 SEP 03,2015 JNC ARM 1 DIMENSIONS: MM [INCH] e [INCH] FOR REF. ONLY REDRAWN & REMOVED m RIGHT ANGLE i T DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE SEP 03,2015 d A CHKD DATE APPVL DATE An a. MATHEWS SEP 03,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2017 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 6 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE e BOARDMOUNT SOCKET, 3M ELECTRONICS MATERIALS SOLUTIONS DIVISION .0 .1 C .00 .01 INTERCONNECT SOLUTIONS 2MM X 2MM, STRAIGHT & .000 .005 3 http://www.3mconnectors.com R THIRD ANGLE PROJECTION .0000 .0002 K. SMT, PAC 20 INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 2 d 3M IS A TRADEMARK OF 3M COMPANY. .0 .3 e FOR TECHNICAL, SALES OR ORDERING UL FILE NO: E68080 MAX SURFACE ROUGHNESS .00 .13 NCUMAGBEER SIZE7DR8AWIN-G5 NO1. 00-0519-8 RKEV. ag INFORMATION CALL 800-225-5373 ALL SURFACES .000 .005 m MARKED ONLY ANGLES MODEL1502 DLIESTT.S YES NO SHT 1 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM BOARDMOUNT SOCKET, 1502 SERIES 2.00MM X 2.00MM STRAIGHT AND SURFACE MOUNT, PLATED THROUGH HOLE D D TABLE 1 DIM. "A" CONTACT SEE TABLE 1 DIM. "A" QTY. 04 3.96 [.156] 06 5.87 [.231] 08 7.87 [.310] 3.84 10 9.88 [.389] 12 11.86 [.467] .151 14 13.87 [.546] 16 15.88 [.625] 18 17.88 [.704] 2.00 20 19.86 [.782] .079 22 21.87 [.861] SEE NOTE 5 24 23.88 [.940] TYP. 26 25.88 [1.019] 28 27.86 [1.097] 30 29.87 [1.176] 1.09 .043 32 31.88 [1.255] C C MATE POINT 34 33.88 [1.334] 36 35.86 [1.412] 38 37.87 [1.491] 4.50 40 39.88 [1.570] 42 41.88 [1.649] .177 44 43.87 [1.727] 46 45.87 [1.806] 48 47.88 [1.885] .71 .028 50 49.89 [1.964] STANDOFF 52 51.87 [2.042] N O KSI .51 2.00 54 53.87 [2.121] EVI R DIM. "B" .25 TAIL .020 .079 56 55.88 [2.200] 8 DIM. "B" .010 58 57.86 [2.278] 9- TYP. 1 (SEE ORDERING INFO) 60 59.87 [2.357] 5 0 - 0R 0BE M 1U 5G N -N 8WI A 7R D B B ORDERING INFORMATION STRAIGHT .71 .08 .028 .003 1502XX-600X-RB SEE NOTE 5 .08 [ .003] AFTER PLATING TYP. CONTACT QTY.: SOLDER TAIL LENGTH: SEE TABLE 1 DIMENSION "B" 1 = 1.4MM (SPECIAL ORDER) 2.00 .08 2 = 2.54MM (STANDARD) t e .079 .003 s f f O C T U 7 2.00 .08 1 0 2 .079 .003 / 7 / RECOMMENDED HOLE PATTERN 2 TOLERANCE K 63282 SEP 03,2015 JNC ARM 1 (AS VIEWED FROM CONNECTOR SIDE) NON-ACCUM. e REDRAWN & REMOVED m TYP. RIGHT ANGLE i T DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE SEP 03,2015 d A CHKD DATE APPVL DATE An a. MATHEWS SEP 03,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2017 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 6 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE e BOARDMOUNT SOCKET, .0 .1 C .00 .01 2MM X 2MM, STRAIGHT & .000 .005 3 THIRD ANGLE PROJECTION .0000 .0002 . K SMT, PAC 20 INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 2 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0519-8 K a ALL SURFACES .000 .005 m MARKED ONLY ANGLES MODEL1502 DLIESTT.S YES NO SHT 2 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 3MTM BOARDMOUNT SOCKET, 1502 SERIES 2.00MM X 2.00MM STRAIGHT AND SURFACE MOUNT, PLATED THROUGH HOLE TABLE 1 CONTACT TAPE ORDER DIM. "A" QTY. WIDTH CODE 04 3.96 [.156] N/A N/A 06 5.87 [.231] N/A N/A D D 08 7.87 [.310] 24 MM WB 10 9.88 [.389] 24 MM WB DIM. "A" 12 11.86 [.467] 24 MM WB SEE TABLE 1 14 13.87 [.546] 24 MM WB 16 15.88 [.625] 24 MM WB 18 17.88 [.704] 44 MM WD 20 19.86 [.782] 44 MM WD 5.08 22 21.87 [.861] 44 MM WD .200 24 23.88 [.940] 44 MM WD 26 25.88 [1.019] 44 MM WD 28 27.86 [1.097] 44 MM WD 5.33 3.84 30 29.87 [1.176] 44 MM WD .210 .151 32 31.88 [1.255] 56 MM WE 34 33.88 [1.334] 56 MM WE 36 35.86 [1.412] 56 MM WE 38 37.87 [1.491] 56 MM WE 2.00 40 39.88 [1.570] 56 MM WE .079 42 41.88 [1.649] 56 MM WE SEE NOTE 5 TYP. 44 43.87 [1.727] 72 MM WF C C 46 45.87 [1.806] 72 MM WF 48 47.88 [1.885] 72 MM WF 50 49.89 [1.964] 72 MM WF 52 51.87 [2.042] 72 MM WF 54 53.87 [2.121] 72 MM WF OPTIONAL VACUUM .51 56 55.88 [2.200] 72 MM WF CAP 1.09 .043 58 57.86 [2.278] 88 MM WG .020 MATE POINT 60 59.87 [2.357] 88 MM WG 4.65 N O KSI VI .183 RE 8 - 9 1 5 .51 .020 0 1.30 - 5.59 .25 0R 2X OPTIONAL LOCATING TYP. 0BE M POST .220 .010 .051 51G NU SEE NOTE 6 8-WIN A 7R D SEE NOTE 6 B B .76 .030 1.52 .060 TYP. TYP. ORDERING INFORMATION SURFACE MOUNT 2X 1.40 .08 1502XX-20X0-RB-XX t 5.59 e .055 .003 s f .220 f O CONTACT QTY.: PACKAGING STYLE: SEE TABLE 1 BLANK = TRAY PACKAGING C T WX = TAPE & REEL PACKAGING U BOARD LOCATION POST: (SEE TABLE 1 FOR ORDERING CODE) 7 1 2.00 .08 0 = NONE (STANDARD) 0 2 2 = WITH BOARD LOCATION POSTS / 7 .079 .003 / (SPECIAL ORDER) 2 SEE NOTE 6 K 63282 SEP 03,2015 JNC ARM 1 TOLERANCE NON-ACCUM. e REDRAWN & REMOVED m TYP. RIGHT ANGLE i T SEE NOTE 5 DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE SEP 03,2015 d A CHKD DATE APPVL DATE An a. MATHEWS SEP 03,2015 RECOMMENDED PAD PATTERN a DIVISION DIVISION CODE C 3M COPYRIGHT 2017 t (AS VIEWED FROM CONNECTOR SIDE) EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 6 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE e BOARDMOUNT SOCKET, .0 .1 C .00 .01 2MM X 2MM, STRAIGHT & .000 .005 3 THIRD ANGLE PROJECTION .0000 .0002 . K SMT, PAC 20 INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 2 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0519-8 K a ALL SURFACES .000 .005 m MARKED ONLY ANGLES MODEL1502 DLIESTT.S YES NO SHT 3 OF 4 I 8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1 D D Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Product Use: Many factors beyond 3M's control and uniquely within user's knowledge and control can affect the use and C C performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user's method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, N O ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS KVISI E FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION R ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. 8 - If the 3M product does not conform to this warranty, then the 9 1 sole and exclusive remedy is, at 3M's option, replacement of 5 the 3M product or refund of the purchase price. 0 - 0R 0BE M 1U Limitation of Liability: Except where prohibited by law, 5G N -N 3M will not be liable for any loss or damage arising from the 8AWI 7R D 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. B B t e s f f O C T U 7 1 0 2 / 7 / 2 K 63282 SEP 03,2015 JNC ARM 1 e REDRAWN & REMOVED m RIGHT ANGLE i T DESIGN REFERENCE NEXT ASSEMBLY REV ECO ISSUE DATE AND DESCRIPTION DRFT CHKD d r ACCESS DRFT DATE MFG DATE a CODES CASTIGLIONE SEP 03,2015 d A CHKD DATE APPVL DATE An a. MATHEWS SEP 03,2015 a DIVISION DIVISION CODE C 3M COPYRIGHT 2017 t EMSD 3M Center This document and the information it contains are S DO NOT SCALE TOLERANCES St. Paul, 3dMis ptrriobpuetertdy awnitdh moauyt 3nMo tp beerm reispsroiodnu,c eodr uosre fdu ortrh er al SCALE 1 EXCEPT AS MN 55144 disclosed other than for 3M authorized purposes. NOTED All rights reserved. r DRAWING 1 t n INCHES TITLE e BOARDMOUNT SOCKET, .0 .1 C .00 .01 2MM X 2MM, STRAIGHT & .000 .005 3 THIRD ANGLE PROJECTION .0000 .0002 . K SMT, PAC 20 INTERPRET PER MILLIMETERS : ASME Y14.5 - 2009 0 2 d .0 .3 e MAX SURFACE ROUGHNESS CAGE SIZE DRAWING NO. REV. g .00 .13 NUMBER 78-5100-0519-8 K a ALL SURFACES .000 .005 m MARKED ONLY ANGLES MODEL1502 DLIESTT.S YES NO SHT 4 OF 4 I 8 7 6 5 4 3 2 1

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3 M: 150214-6002-TH 150218-6001-TH 150220-2000-TB 150220-2020-TH 150224-6002-TH 150226-5022-TH 150226- 6001-TH 150228-6002-TH 150234-5002-TH 150250-5002-TH 150250-6001-TH 150260-6002-TH 150238-5022-TH W150224-2020-TH 150210-2020-RB 150250-6002-TH 150206-2000-RB-WB 150208-2000-RB 150210-2000-TH 150212-2020-RB 150216-2000-RB 150220-2000-RB 150220-2020-TH-WD 150232-2020-RB 150234-2000-RB 150234-2020-RB 150240-2000-RB 150240-2020-RB 150244-2000-RB 150250-2000-RB 150250-2020-RB 150252- 2020-RB 150260-2020-RB 150220-2020-RB-WD