Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties Test conditions Value Unit Power Dissipation P 72 mW Diss Peak Forward Current duty/ 10 @ 1 kHz I 100 mA F Peak p. R 0,2 typ. 3,2 Reverse Voltage VREV 5 V y 1,0 t ESD Threshold/ Human Body 1 1 2 Model VESD HBM 2000 V 2 Junction Temperature T 95 °C 1,2±0,1 1, J Optical Properties: 1 2 Chip Technology AlInGaP Emitting Color Super Red 1,4±0,1 0,1 Lens Type Chip LED ± Scale - 10:1 3 1 0, 0, ± 7 Schematic: 0, 2±0,1 General Information: Operating Temperature -40 °C up to +85 °C Polarity Mark Storage Conditions -40 °C up to +85 °C, < 60% RH (Cathode) - + Moisture Sensitive Level MSL 3 1 1 2 0, ± 5 2 1, Scale - 15:1 Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PMREOTJHEOCDTION EMC & Inductive Solutions KaS PLD DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg WL-SMCW SMD Mono-color Chip Germany Tel. +49 (0) 79 42 945 - 0 LED Waterclear ORDER CODE www.we-online.com 150080SS75000 eiSos@we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 0805 002.008 Valid 2017-12-01 eiPal 1/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Electrical & Optical Properties: Viewing Angle: Value Properties Test conditions Unit min. typ. max. Peak Wavelength 20 mA λ 645 nm Peak Dominant Wavelength 20 mA λ 630 nm Dom Luminous Intensity 20 mA I 30 60 mcd V Forward Voltage 20 mA V 1.9 2.4 V F Spectral Bandwidth 20 mA Δλ 20 nm Reverse Current 5 V I 10 µA REV Viewing Angle Phi 0° 20 mA 2θ50% 140 ° 100 -70° 0° 10° 20° 90 30° 80 40° %) 45° sity ( 70 en 50° nt 60 s I u no 50 60° mi u e L 40 elativ 30 70° R 20 80° 10 90° -90 -45 0 10 20 30 40 50 60 70 80 90 100 Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PMREOTJHEOCDTION EMC & Inductive Solutions KaS PLD DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg WL-SMCW SMD Mono-color Chip Germany Tel. +49 (0) 79 42 945 - 0 LED Waterclear ORDER CODE www.we-online.com 150080SS75000 eiSos@we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 0805 002.008 Valid 2017-12-01 eiPal 2/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Spectral: Forward Current vs. Forward Voltage: 35 30 100 25 80 A] m [ %] nt 20 y [ 60 e ensit urr nt C ve I d Relati 40 war 15 r o F 20 10 0 400 450 500 550 600 650 700 750 Wavelength [nm] 5 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 Forward Voltage [V] Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PMREOTJHEOCDTION EMC & Inductive Solutions KaS PLD DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg WL-SMCW SMD Mono-color Chip Germany Tel. +49 (0) 79 42 945 - 0 LED Waterclear ORDER CODE www.we-online.com 150080SS75000 eiSos@we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 0805 002.008 Valid 2017-12-01 eiPal 3/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Luminous Intensity vs. Forward Current: Derating Curve: 120 40 110 35 100 90 30 ] 80 d c A]A] 25 m mm y [ 70 t [t [ t nn si ee n rr nte 60 CurCur 20 s I d d u arar o 50 ww n rr 15 mi oo FF u L 40 10 30 20 5 10 0 0 20 40 60 80 100 0 0 5 10 15 20 25 30 35 AAmmbbiieenntt TTeemmppeerraattuurree[[°°CC]] Forward Current [mA] Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PMREOTJHEOCDTION EMC & Inductive Solutions KaS PLD DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg WL-SMCW SMD Mono-color Chip Germany Tel. +49 (0) 79 42 945 - 0 LED Waterclear ORDER CODE www.we-online.com 150080SS75000 eiSos@we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 0805 002.008 Valid 2017-12-01 eiPal 4/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Packaging Specification - Tape and Reel: [mm] P0 K0 A D0 P2 T W3 1 E W1 close to center B D F W A N 2 0 E B C Top Cover Tape A D1 P1 T1 W2 A0 T2 End Feeding direction Start Carrier Tape Cover Tape No Component Components No Component min.160mm min.100mm Cover Tape min. 400mm A B C D N W1 W2 W3 W3 packaging is reffered to the international standard IEC 60286-3:2013 Tolerance ± 2,0 min. min. min. min. +1,5 max. min. max. Tape width 8 mm 178 1.5 12.8 20.2 50 8.4 14.4 7.9 10.9 A0 B0 W T T1 T2 K0 P0 P1 P2 D0 D1 E1 E2 F Tape Type 2a VPE / packaging unit tolerance typ. typ. +0,3/ -0,1 ref. max. typ. typ. ±0,1 ± ±0,05 +0,1/ -0,0 min. ±0,1 min. ±0,05 pcs. size 0805 1,42 2,28 8,0 0,2 0,1 1,04 1,2 4,0 4,0 2,0 1,5 0,3 1,75 6,25 3,5 Polystyrene 4000 Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PMREOTJHEOCDTION EMC & Inductive Solutions KaS PLD DIN ISO 2768-1m 165° - 180° Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg WL-SMCW SMD Mono-color Chip Germany Tel. +49 (0) 79 42 945 - 0 LED Waterclear ORDER CODE www.we-online.com 150080SS75000 eiSos@we-online.com Pull-of force SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE Tape width 8 mm 0,1 N - 1,0 N 0805 002.008 Valid 2017-12-01 eiPal 5/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Value Preheat Temperature Min T 150 °C s min Preheat Temperature Max T 200 °C s max T p t TC –5°C Preheat Time ts from Ts min to Ts max ts max. 60 - 120 seconds Max. Ramp Up Rate p Ramp-up Rate (T to T ) 3 °C/ second max. L P Max. Ramp Down Rate Liquidous Temperature T 217 °C L TL Time tL maintained above TL tL max. 60 seconds t Ts max Preheat Area L Peak package body temperature Tp see table e Time within 5°C of actual peak temperaure t max. 10 seconds r p u at Ramp-down Rate (TL to TP) 6 °C/ second max. er T Time 25°C to peak temperature max. 220 seconds p s min m refer to IPC/ JEDEC J-STD-020E e T tS Package Classification Reflow Temperature: Volume mm³ Volume mm³ Volume mm³ Properties <350 350-2000 >2000 PB-Free Assembly | Package Thickness < 1.6 mm 260 °C 260 °C 260 °C 25 Time 25°C to Peak PB-Free Assembly | Package Thickness 1.6 mm - 2.5 mm 260 °C 250 °C 245 °C PB-Free Assembly | Package Thickness ≥ 2.5 mm 250 °C 245 °C 245 °C Time Applied cycles 2 cycles max. refer to IPC/ JEDEC J-STD-020E Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PMREOTJHEOCDTION EMC & Inductive Solutions KaS PLD DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg WL-SMCW SMD Mono-color Chip Germany Tel. +49 (0) 79 42 945 - 0 LED Waterclear ORDER CODE www.we-online.com 150080SS75000 eiSos@we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 0805 002.008 Valid 2017-12-01 eiPal 6/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Cautions and Warnings: • It is also recommended to return the LEDs to the original moisture proof bag and reseal the moisture proof bag again. • Certain LED surfaces consist of soft material. Pressure on the top surface has to be handeled carefully to prevent negative influence to the function and reliability of the LEDs. The following conditions apply to all goods within the product series of WL-SMCW of • ESD prevention methods need to be applicated for manual handling and processing by machinery. Würth Elektronik eiSos GmbH & Co. KG: • Resistors for protection are obligatory. General: Luminaires in operation could harm human vision or skin on a photo-biological level, therefore direct light impact has to be avoided. All products are additionally certified as risk groups 0 to 2 according to DIN EN 62471:2008 All recommendations according to the general technical specifications of the data sheet have to be complied with. The usage and operation of the product within ambient conditions, which probably alloy or harm the component surface, has to be avoided. If the product is potted in customer applications, the potting material might shrink during and after hardening. The product is exposed to the pressure of the potting material with the effect that the LED body, pins or termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endangered to be affected. After the potting material is cured, the LED body, pins or termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred. The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply to customer specific products. Washing varnish agent that is used during the production to clean the customer application might damage or change the characteristics of the LED body, pins or termination. The washing varnish agent could have a negative effect on the long term function of the product. Direct mechanical impact to the product shall be prevented as the material of the LED body, pins or termination could flake or in the worst case it could break. The standard deliveries include values in the range and limitation as defined in the Electrical & Optical Properties specified in the datasheet. On each reel, only one bin is sorted and taped. The bin is defined on intensity, chromaticity coordinate or wavelength and forward voltage. In order to ensure highest availability, the reel binning of standard deliveries can vary. A single bin cannot be ordered. Please contact us in advance, if you need a particular bin sorting before placing your order to clarify the lead time, MOQ and pricing. Product specific: Follow all instructions mentioned in the data sheet, especially: • The soldering profile has to be complied with according to the technical reflow/ or wave soldering specification, otherwise this will void the warranty. • All products shall be used before the end of the period of 12 months based on the product date code, if not a 100% solderability can´t be ensured. • Violation of the technical product specifications such as exceeding the absolute maximum ratings will void the warranty. Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PMREOTJHEOCDTION EMC & Inductive Solutions KaS PLD DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg WL-SMCW SMD Mono-color Chip Germany Tel. +49 (0) 79 42 945 - 0 LED Waterclear ORDER CODE www.we-online.com 150080SS75000 eiSos@we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 0805 002.008 Valid 2017-12-01 eiPal 7/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Important Notes 6. Product Life Cycle Due to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a The following conditions apply to all goods within the product range of Würth Elektronik standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage eiSos GmbH & Co. KG: about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product 1. General Customer Responsibility availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Some goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the 7. Property Rights areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this All the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth characteristics described in the product specification is valid and suitable for the respective customer application or not. Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, 2. Customer Responsibility related to Specific, in particular Safety-Relevant Applications application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used. It has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime 8. General Terms and Conditions cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications. In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable Elektronik eiSos Group”, last version available at www.we-online.com. design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at www.we-online.com. 3. Best Care and Attention Any product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty. 4. Customer Support for Product Specifications Some products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter. 5. Product R&D Due to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected. Würth Elektronik eiSos GmbH & Co. KG CREATED CHECKED GENERAL TOLERANCE PMREOTJHEOCDTION EMC & Inductive Solutions KaS PLD DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg WL-SMCW SMD Mono-color Chip Germany Tel. +49 (0) 79 42 945 - 0 LED Waterclear ORDER CODE www.we-online.com 150080SS75000 eiSos@we-online.com SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 0805 002.008 Valid 2017-12-01 eiPal 8/8 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: W urth Electronics: 150080SS75000