Temperature Sensors Line Guide Accuracy and flexibility. Stability and speed. Honeywell application. That’s why more customers worldwide call the Sensing and Productivity Solutions (S&PS) offers an impressive industry’s most trusted name for: array of temperature sensors, each designed to provide • Enhanced accuracy and stability enhanced reliability, repeatability, precision, and responsiveness. • Strong standard technology platforms These temperature sensors are designed to maximize your • A wide variety of housings and termination styles component and product performance for most any potential • Easy-to-customize platforms • High-temp product line expansion sensing capability • Comprehensive technical support FEATURES PACKAGED TEMPERATURE Benefits: Durable, closed-tip design R300 Series. PROBES maximizes reliability in harsh applications. Features: Wide temperature-range Sensor’s thermistor sensing element • Stainless steel construction • Enhanced LTP Series. effectively senses gases, liquids or solids response time • Enhanced accuracy Features: Response time [T63.2% of 25 because of its enhanced sensitivity, • Enhanced reliability • Linear output °C to 85 °C step]: stirred silicon oil <15 s; accuracy and reliability. Easy-to-install • Extended life stirred water <15 s; air flow 10 m/s <20 s threaded mounting provides reliable Benefits: Robust, stainless steel closed- • Accuracy: -40 °C to 25 °C [-40 °F to 77 operation in harsh environments. tip design for reliability in most aggressive °F]: ±2.5 °C, 25 °C to 100 °C [77 °F to 212 Numerous options—from mechanical environments, while still providing °F]: ±0.8 °C, 100 °C to 125 °C [212 °F to and electrical interface—simplify enhanced response time. One-piece 257 °F]: ±2.0 °C, 125 °C to 150 °C [257 °F installation, allow customers to meet sensor with integral connector for potential to 302 °F]: ±3.5 °C • Electrical interfaces specific application needs, and facilitate use in heavy duty vehicle engine exhaust are Bosch Kompakt, Delphi Metri-Pack backwards compatibility with most existing gas recirculation systems, fluid or air 150 Series, AMP Seal 16, AMP Minitimer, applications. Zero NRE (non-recurring temperature sensing within the engine AMP Superseal, and Deutsch DT04-2P engineering) costs for configurations. environment or HVAC, or refrigeration • Probe length options: 20 mm to 50 mm Reduces cost of ownership due to BOM compressor equipment. (other lengths available upon request) (bill of materials), engineering, testing, • Retainer ring with hex provides complete NRE and tooling. Reduces design costs 500 Series. location for socket wrench in axial and due to plug-and-play options, backwards Features: Choice of custom or existing radial directions, enabling the operator to integration, flexible offering, customization designs • Wide selection of housing, first locate the sensor inside the socket and non-standard offering. Potential resistance, and termination options • Wide freely and more easily install the sensor transportation applications include operating temperature range • Ingress protection: IP67 • Vibration of 30 temperature sensing for ambient air, g sine wave,10 Hz to 2000 Hz automatic transmission systems, engine Benefits: Housing material ranges from • Mechanical shock of 50 g • Service air inlet systems, engine cooling systems, all plastic to all-metal, and accommodates pressure: 10 bar • Burst pressure: 40 engine lubrication systems, fuel systems, air/gas, fluid immersion or surface sensing bar • Wire harness (with or without a Haldex coupling systems, and hydraulic requirements. Full range of custom or connector) or other sensing elements pump systems. off-the-shelf thermistor and RTD-based (PTC or RTD) available upon request solutions for a wide variety of potential industrial, transportation, and aerospace applications. Sensing and Producticvoitnyt iSnouleudti oonns pa g e 19

Temperature Sensors Line Guide Products for thousands of potential applications. Packaged Honeywell S&PS temperature Temperature Probes sensors provide multiple LTP Series R300 Series choices: Packaged Temperature Temperature sensing type immersion/air-gas immersion Probes: These responsive Sensing element NTC RTD sensors are often ideal -40 °C to 25 °C [-40 °F to 77 °F]: ±2.5 °C for fluid, surface, and air/ 25 °C to 100 °C [77 °F to 212 °F]: ±0.8 °C better than ±3.0 °C from gas temperature sensing. Accuracy 100 °C to 125 °C [212 °F to 257 °F]: ±2.0 °C -40 °C to 300 °C typ. Honeywell’s temperature 125 °C to 150 °C [257 °F to 302 °F]: ±3.5 °C probes are offered in a Nominal resistance at 1000 Ohm, 2252 Ohm, 2057 Ohm, variety of housing materials 25 °C [77 °F] 2795 Ohm 100 Ohm and styles, terminations and -40 °C to 275 °C [-40 °F to 572 °F] R-T curve types, depending Operating temperature range -40 °C to 150 °C [-40 °F to 302 °F] continuous, excursion to 300 °C on customers’ application [572 °F] for 10 min. max. needs. Honeywell’s packaged Housing material brass hex, stainless steel probe tip stainless steel temperature probe assemblies Bosch Kompakt, Delphi Metri-Pack 150 Series, incorporate either NTC Electrical and mechanical AMP Seal 16, AMP Minitimer, AMP Superseal, overmolded connector with M14 x (negative temperature interface and Deutsch DT04-2P; M10 to M18, 3/4 UNF, 1.50 thread coefficient) thermistors or or G 1/4 threads, two hex options RTD (resistance temperature detector) technology and operate under a wide range of environmental conditions. Whether it be an IP67 seal- rated oil temperature sensor used in the engine of a Packaged heavy duty vehicle, a surface Temperature Probes temperature sensor used to ES110 Series ES120 Series monitor critical compressor temperatures in a transport refrigeration system, or an Temperature sensing type air/gas immersion air temperature sensor rated Sensing element NTC NTC or KTY to MIL-PRF-23648 used to Nominal resistance at 2000 Ohm 2000 Ohm measure aircraft engine – 25 °C [77 °F] bleed air temperature inside Operating temperature range -40 °C to 150 °C [-40 °F to 302 °F] -40 °C to 150 °C [-40 °F to 302 °F] the leading edge of an aircraft Housing material brass brass wing, Honeywell has the right technology, sensor packaging, Electrical and mechanical overmolded connector with M10x1.25 or overmolded connector with M10x1.25, interface M12 x 1.50 thread M14 x 1.50 thread or 1/8 PTF testing, track record and application expertise to provide the right sensor solution for its customers. Customers trust and depend on Honeywell temperature sensors every day for their precision, stability, reliability and quality. 2 Sensing and Productivity Solutions

Discrete and Packaged RTD Sensors: Our platinum-based Packaged RTDs are laser-trimmed for Temperature Probes accuracy and flexibility — 6655 Series 500 Series designed to offer stable and fast linear outputs, accurate Temperature sensing type air/surface air/gas, immersion, surface, and liquid level and interchangeable, Sensing element NTC NTC plus plastic and ceramic, Nominal resistance at 10,000 Ohm, 12,000 miniaturized and surface 200 Ohm to 1,000,000 Ohm (inclusive) 25 °C [77 °F] Ohm mount housings (including printed circuit board -20 °C to 110 °C [-4 °F Operating temperature range -60 °C to 300 °C [-76 °F to 572 °F] (inclusive) termination). Potential to 230 °F] applications include plastic, aluminum, stainless steel, epoxy filled, tin- or Housing material phenolic motor overload and nickel-plated copper, ceramic or kynar-filled tubing semiconductor protection, quick connect terminal: electronic assembly thermal Electrical and mechanical (90°, 0.25 in), (0°, 0.25 wide variety of connectors and lead types, materials and management and temperature interface in), (45°, 0.25 in), (90°, insulation compensation, as well as 0.1875 in) HVAC equipment. Discrete Thermistors: These sensors don’t amplify, rectify, polarize or generate a signal, but rather change resistance with any change in temperature. The change can occur in the surrounding temperature or by passing a current through the thermistor to self-heat. Discrete RTD Sensors HEL-705, 707, 710 Series HEL-775 Series Sensor type 100 Ohm, 1000 Ohm platinum RTD 100 Ohm, 1000 Ohm platinum RTD 0.00385 Ohm/Ohm/°C, 0.00375 Ohm/ 0.00385 Ohm/Ohm/°C, 0.00375 Ohm/ Temperature coeffiecient Ohm/°C Ohm/°C TFE Teflon: -70° to +260°C (-94° to +500°F) -55 °C to 150 °C Temperature sensing range fiberglass: -75° to +500°C [-67 °F to 302 °F] (-100° to +932°F) Packaging type alumina tube ceramic case Termination 28 ga. or 24 ga. leadwire SIP 100 Ohm ±1; 0.6 Ohm at 0 °C, 100 Ohm ±1; 0.6 Ohm at 0 °C, Base resistance and 100 Ohm ±1; 1.2 Ohm at 0 °C, 100 Ohm ±1; 1.2 Ohm at 0 °C, interchangeability 1000 Ohm ±1; 0.6 Ohm at 0 °C, 1000 Ohm ±1; 0.6 Ohm at 0 °C, 1000 Ohm ±1; 1.2 Ohm at 0 °C 1000 Ohm ±1; 1.2 Ohm at 0 °C <6,8 mW/°C typ., Self-heating <15 mW/°C for 0.85 O.D. typ. 9,7 mW/°C typ. Sensing and Productivity Solutions 3

Temperature Sensors Line Guide Discrete RTD Sensors HEL-777/776 Series 700 Series Sensor type 100 Ohm, 1000 Ohm platinum RTD 100 Ohm, 1000 Ohm platinum RTD Temperature coeffiecient 0.00385 Ohm/Ohm/°C, 0.00375 Ohm/Ohm/°C 0.00385 Ohm/Ohm/°C, 0.00375 Ohm/Ohm/°C -70 °C to 500 °C [-94 °F to 932 °F] Temperature sensing range -55 °C to 150 °C [-67 °F to 302 °F] lead version: -50 °C to 130 °C [-58 °F to 266 °F] Packaging type molded plastic radial chip or surface mount axial flip chip Termination SIP leadwires or solderpads 100 Ohm ±1; 0.6 Ohm at 0 °C, 100 Ohm ±1; 0.6 Ohm at 0 °C, Base resistance and 100 Ohm ±1; 1.2 Ohm at 0 °C, 100 Ohm ±1; 1.2 Ohm at 0 °C, interchangeability 1000 Ohm ±1; 0.6 Ohm at 0 °C, 1000 Ohm ±1; 0.6 Ohm at 0 °C, 1000 Ohm ±1; 1.2 Ohm at 0 °C 1000 Ohm ±1; 1.2 Ohm at 0 °C Self-heating <15 mW/°C typ. 0,4k /mW, 0.6k /mW or 0.8k/mW at 0 °C [32 °F] Discrete and Packaged RTD Sensors HRTS Series TD Series Sensor type 100 Ohm, 1000 Ohm platinum RTD 2000 Ohm silicon resistive element Temperature coeffiecient 0.00385 Ohm/Ohm/°C, 0.00375 Ohm/Ohm/°C N/A Temperature sensing range -70 °C to 260 °C [-94 °F to 500 °F] -40 °C to 150 °C [-40 °F to 302 °F] Packaging type ceramic case plastic or threaded aluminum case Termination leadwires SIP or leadwires 100 Ohm ±1; 0.6 Ohm at 0 °C, Base resistance and 100 Ohm ±1; 1.2 Ohm at 0 °C, R2000 Ohm ±5 Ohm at 20 °C interchangeability 1000 Ohm ±1; 0.6 Ohm at 0 °C, 1000 Ohm ±1; 1.2 Ohm at 0 °C Self-heating <0,3 mW/°C typ. N/A 4 Sensing and Productivity Solutions

Discrete Thermistors 111 Series 112 Series 115 Series E-I tested and matched beads on header Description small, hermetically-sealed glass bead large, hermetically-sealed glass bead assembly Operating temperature range -60 °C to 300 °C [-76 °F to 572 °F] -60 °C to 300 °C [-76 °F to 572 °F] -60 °C to 300 °C [-76 °F to 572 °F] Dissipation constant in still air 0,1 mW/°C 0,4 mW/°C varies with assembly type Time constant in air 0.5 s 4.0 s 0.5 s 200 Ohm, 500 Ohm, 1,000 Ohm, 2,000 Nominal resistance 1,000 Ohm, 2,000 Ohm, 8,000 Ohm, Ohm, 5,000 Ohm, 10,000 Ohm, 50,000 2,000 Ohm, 8,000 Ohm at [25 °F to 77 °F] 10,000 Ohm, 100,000 Ohm Ohm, 100,000 Ohm, 500,000 Ohm, 2,000,000 Ohm Maximum diameter 0,36 mm [0.014 in] 1,14 mm [0.045 in] 0,36 mm [0.014 in] Termination material platinum iridium platinum iridium glass to metal header Lead length 9,6 mm [0.375 in] 9,6 mm [0.375 in] 31,75 mm [1.25 in] Discrete Thermistors 120 Series 121 Series Description mini glass probe standard glass probe Operating temperature range -60 °C to 300 °C [-76 °F to 572 °F] -60 °C to 300 °C [-76 °F to 572 °F] Dissipation constant in still air 0,7 mW/°C, 1,0 mW/°C 1,0 mW/°C Time constant in air 10.0 s 22.0 s Nominal resistance 2,000 Ohm, 5,000 Ohm, 10,000 Ohm, 50,000 Ohm, 100,000 1,000 Ohm, 2,000 Ohm, 10,000 Ohm at [25 °F to 77 °F] Ohm, 1,000,000 Ohm Maximum diameter 1,5 mm [0.060 in] 2,54 mm [0.10 in] Termination material dumet dumet Lead length 31,8 mm [1.25 in] 50,8 mm [2.00 in] Sensing and Productivity Solutions 5

Temperature Sensors Line Guide Discrete Thermistors 126 Series 128 Series 129 Series Description matched large glass bead matched mini glass probe matched large glass probe Operating temperature range -60 °C to 300 °C [-76 °F to 572 °F] -60 °C to 300 °C [-76 °F to 572 °F] -60 °C to 300 °C [-76 °F to 572 °F] Dissipation constant in still air 0,8 mW/°C 2,1 mW/°C 3,0 mW/°C Time constant in air 4.0 s 10.0 s 22.0 s Nominal resistance 2,000 Ohm; 100,000 Ohm 2,000 Ohm; 15,000 Ohm 2,000 Ohm; 4,000 Ohm at [25 °F to 77 °F] Maximum diameter 2,54 mm [0.10 in] 3,05 mm [0.120 in] 5,08 mm [0.20 in] Termination material platinum iridium dumet dumet Lead length 9,6 mm [0.375 in] 31,8 mm [1.25 in] 50,8 mm [2.00 in] Discrete Thermistors 135 Series 140 / 142 Series 143 Series Description glass encapsulated chip, DO-35 type disc disc Operating temperature range -60 °C to 300 °C [-76 °F to 572 °F] -60 °C to 150 °C [-76 °F to 302 °F] -60 °C to 150 °C [-76 °F to 302 °F] Dissipation constant in still air 2,5 mW/°C 3,0 mW/°C / 4,0 mW/°C 5 to 7 mW/°C Time constant in air 4.0 s 10.0 s 16.0 s 1,000 Ohm; 2,000 Ohm; 5,000 Ohm; 10,000 Ohm; 20,000 Ohm; 25,000 Ohm; 500 Ohm; 1,000 Ohm; 3,000 Ohm; 5,000 Nominal resistance 30,000 Ohm; 47,000 Ohm; 50,000 Ohm; 100 Ohm; 200 Ohm; 1,000 Ohm; Ohm; 8,000 Ohm; 10,000 Ohm; 25,000 at [25 °F to 77 °F] 100,000 Ohm; 200,000 Ohm; 230,000 3,000 Ohm; 5,000 Ohm; 30,000 Ohm Ohm; 100,000 Ohm Ohm; 500,000 Ohm; 1,000,000 Ohm; 5,000,000 Ohm Maximum diameter 2,0 mm [0.080 in] 2,54 mm [0.10 in] 5,08 mm [0.20 in] Termination material tinned copper-clad steel tinned copper tinned copper Lead length 28,6 mm [1.125 in] 38,1 mm [1.50 in] 38,1 mm [1.50 in] 6 Sensing and Productivity Solutions

Discrete Thermistors 173 Series 175 Series Description EIA 0805 surface mount, end-banded EIA 1206 surface mount, end-banded Operating temperature range -60 °C to 125 °C [-76 °F to 257 °F] -60 °C to 125 °C [-76 °F to 257 °F] Dissipation constant in still air 3,5 mW/°C 3,5 mW/°C Time constant in air 10.0 s 10.0 s Nominal resistance 500 Ohm, 5,000 Ohm, 10,000 Ohm, 22,000 Ohm, 33,000 Ohm, 5,000 Ohm, 10,000 Ohm, 50,000 Ohm, 100,000 Ohm, at [25 °F to 77 °F] 47,000 Ohm, 50,000 Ohm, 100,000 Ohm 440,000 Ohm Maximum diameter EIA 0805 SMD EIA 1206 SMD Termination material solder plated NI barrier solder plated NI barrier Lead length N/A N/A Discrete Thermistors 192 Series 194 Series Description Uni-Curve with bare leads and epoxy Uni-Curve with insulated leads and epoxy Operating temperature range -60 °C to 150 °C [-76 °F to 302 °F] -60 °C to 150 °C [-76 °F to 302 °F] Dissipation constant in still air 0,75 mW/°C 0,75 mW/°C Time constant in air 15.0 s 15.0 s 500 Ohm, 1,000 Ohm, 2,252 Ohm, Nominal resistance 2,252 Ohm, 3,000 Ohm, 5,000 Ohm, 10,000 Ohm, 3,000 Ohm, 5,000 Ohm, 10,000 Ohm, 30,000 Ohm, at [25 °F to 77 °F] 30,000 Ohm, 100,000 Ohm, 50,000 Ohm 50,000 Ohm, 100,000 Ohm Maximum diameter 2,413 mm [0.095 in] 2,413 mm [0.095 in] Termination material tinned copper, alloy 180 solid nickel, Teflon insulated Lead length 38,1 mm [1.50 in] 38,1 mm [1.50 in] Sensing and Productivity Solutions 7

Temperature Sensors Line Guide Discrete Thermistors 197 Series ICL Series Description chip with bare leads and epoxy inrush current limiter Operating temperature range -60 °C to 125 °C [-76 °F to 257 °F] -40 °C to 185 °C [-40 °F to 365 °F] Dissipation constant in still air 0,75 mW/°C 12.7 mW/°C to 23 mW/°C Time constant in air 15.0 s 32 s to 93 s Nominal resistance 300 Ohm, 1,000 Ohm, 3,000 Ohm, 0.5 Ohm to 220 Ohm +/- 20 % at [25 °F to 77 °F] 5,000 Ohm, 10,000 Ohm, 50,000 Ohm, 100,000 Ohm Maximum diameter 2,413 mm [0.095 in] 9.5 mm [0.374 in] to 32 mm [1.26 in] Termination material tinned copper, alloy 180 tinned copper Lead length 38,1 mm [1.50 in] 1 in min. 8 Sensing and Productivity Solutions

ES110 Series. DISCRETE RTD SENSORS sizes each of leaded and surface mount Features: Exposed thermistor • Rugged HEL-700 Series. configurations. Surface mount in industry- design • Brass encapsulation • Plastic Features: Linear resistance vs. standard 0805 and 1206 packages. 100 overmold • Enhanced response time temperature • Accurate and Ohm and 1000 Ohm base resistance • Wide operating temperature range interchangeable • Enhanced stability in both 3850 ppm/K and 3750 ppm/K • Teflon or fiberglass lead wires • Wide temperature coefficients (385 and 375 Benefits: Overmolded, hexagonal shape temperature range • Ceramic case alphas). Tolerances meet DIN class A, for easy installation. Two end configurations material • Multiple sizes DIN class B and DIN class 2B industry available, depending on response or degree standards. Wide temperature range of protection required. All-plastic design Benefits: Fully assembled and ready to use covers most potential applications. reduces heat loss through the sensor. without need for fragile splices to extension Including HVAC, electronic assemblies, Exposed thermistor offers fast response leads. Wide temperature range covers thermal management and process control. for air/gas sensing, especially for potential most potential applications such as HVAC, transportation engine management systems electronic assemblies and process control. HRTS Series. and industrial applications. Features: Linear resistance vs. HEL-775 Series. temperature • Resistance interchangeable ES120 Series. Features: Linear resistance vs. • Accurate • Fast • Laser trimmed • Wide Features: Enclosed thermistor • Rugged temperature • Accurate and temperature range design • Brass encapsulation • Plastic interchangeable • Enhanced stability overmold • Wide operating temperature • Thin film platinum • Ceramic SIP Benefits: Fully assembled and ready range package • Solderable leads • Small size to use without need for fragile splices to extension leads. Wide temperature Benefits: Overmolded, hexagonal shape Benefits: Ceramic SIP package with range covers most potential applications for easy installation. All-plastic design solderable leads provides strong including HVAC, electronic assemblies reduces heat loss through the sensor. connections for wires or printed circuits. and process control applications. Enclosed thermistor may potentially Ideal for PCBs, temperature probes and be used for liquid temperature sensing other lower temperature applications TD Series. in engine management systems and including HVAC, electronic assemblies Features: Linear resistance vs. industrial applications. and process control applications. temperature • Interchangeable without recalibration • Thin film • Laser trimmed 6655 Series. HEL-777/776 Series. • Long term stability • Air or liquid Features: Air/surface temperature Features: Linear resistance vs. temperature sensing • Cost effective sensing • NTC thermistor output • Low temperature • Accurate and cost • Low, compact profile • Tight interchangeable • Enhanced stability Benefits: Provide 8 Ohm/°C sensitivity interchangeability • Enhanced accuracy • Thin film platinum • Molded plastic SIP with inherently near linear output. • Enhanced response time • Wide package • Solderable leads • Small size Completely interchangeable without operating temperature range • Variety of sensor-to-sensor recalibration. Silicon Benefits: Molded plastic SIP package mounting brackets • Widely used sensor chip sensing element with proven thin with solderable leads provides strong package footprint • Enhanced stability/ film processing reliability. Individually connections for wires or printed circuits. low drift laser trimmed. TD4A environmentally 1000 Ohm, 375 alpha version provides sealed liquid temperature sensors simple Benefits: Offers temperature 10X greater sensitivity and signal to noise. to install. TD5A miniature temperature measurements with enhanced response Ideal for PCBs, temperature probes, or sensors used where space is at a and accuracy on most flat surfaces and other potential applications including premium. Very small thermal mass for pipes in non-condensing applications. HVAC, electronic assemblies and process rapid response to temperature changes in Allows greater flexibility in temperature control. potential industrial applications including monitoring and controlling. Tight HVAC, semiconductor protection, and interchangeability eliminates or reduces 700 Series. process control. need for calibration. A wide operating Features: Linear resistance vs. temperature range allows application temperature • Enhanced accuracy DISCRETE THERMISTORS flexibility. Potential applications include • Interchangeability • Surface mount 111 Series. water heaters and boilers, industrial ovens versions • Enhanced stability • Enhanced Features: Enhanced response time and ranges, copier diffuser rollers, and time response • Wide temperature range • Hermetically sealed in glass • Enhanced HVAC compressor or duct temperature • Cost effective long-term stability • Micro size • Relatively sensing. Benefits: Economical, miniature uniform size • Weldable platinum iridium temperature sensors available in two leads Sensing and Productivity Solutions 9

Benefits: Highly sensitive to electric glass encapsulated units often ideal capability • Enhanced reliability • Uniform power. Potential for use in self- for immersion in fluid and convenient dimensions • Tape and reel • Cost heat applications such as gas flow for mounting in air sensor sensing effective measurement and thermal conductivity assemblies. Enhanced reliability. Potential Benefits: Uniform dimensions and tape analysis. Micro size for use in extremely for use in a wide variety of military and and reel for automated assembly. Rugged small application spaces, such as medical aerospace applications. sensor designed for potential high-volume, assemblies. cost-sensitive applications that demand 126 Series. enhanced reliability. 112 Series. Features: Hermetically sealed in glass Features: Enhanced response time • Interchangeability • Accuracy 140 Series. • Hermetically sealed in glass • Enhanced • Enhanced sensitivity • Enhanced Features: Cost effective • PC board long-term stability • Small size • Meets stability • Enhanced reliability • Small size mountable • Rugged design • Versatile MIL-T-23648 • Weldable platinum iridium • Cost effective • Solderable leads leads Benefits: May be selected to tolerances Benefits: Broad range of custom Benefits: Small sensors designed to only limited to the system’s capability resistance values and R/T curves. provide maximum stability for potential available to test them. Precision sensing Potential applications include low-cost low cost, general purpose temperature elements used where curve-matched applications with a maximum temperature measurement and control applications interchangeability is required for precise of 150 °C [302 °F]. as well as most stringent military and temperature control and precision aerospace applications. temperature indication. 143 Series. Features: Rugged design • PC board 115 Series. 128 Series. mountable • Solderable leads • Cost Features: E-I matched in air or helium Features: Hermetically sealed in glass effective • Resistance matched at 25 °C [77 °F] • Interchangeability • Accuracy • Interchangeable pairs • Extended life • Enhanced sensitivity, stability and Benefits: Broad range of custom • Compression-type glass hermetic seal reliability • Miniature size • Cost effective resistance values and R/T curves. • High pressure solder seal Potentially for use in high-volume, cost- Benefits: Miniature size for applications sensitive applications. Benefits: Two beads, each bead mounted where space is at a premium. May be to a special hermetically-sealed header. selected to tolerances only limited to the 173 Series. Use higher resistance units at higher system’s capability available to test them. Features: Surface mount • Tape and reel ambient temperatures for maximum Precision sensing elements for where • Glass-coated ceramic • Solder-plated Ni sensitivity. Potential for use in gas curve-matched interchangeability is • 0805 EIA package • Cost effective chromatography, thermal conductivity gas required for precise temperature control analysis instruments, medical and military/ and precision temperature indication Benefits: Surface mount for automated aerospace applications. such as military, aerospace, medical, and pick and place. Tape and reel for high instrumentation test equipment. volume applications such as PC boards. 120 Series. Glass-coated ceramic designed for long Features: Hermetically sealed in glass 129 Series. term reliability. Solder-plated Ni-barrier • Enhanced reliability and stablility Features: Interchangeability • Accuracy terminations easy to solder. Potential • Weldable/solderable dumet leads • Enhanced sensitivity, stability and for use in high-volume, cost-sensitive reliability • Small size • Cost effective applications. Benefits: Shock resistant, rugged, glass encapsulated units often ideal Benefits: May be selected to tolerances 175 Series. for immersion in fluid and convenient only limited to the system’s capability Features: Surface mount • Tape and reel for mounting in air sensing assemblies. available to test them. Precision sensing • Glass-coated ceramic • Solder-plated Ni Extremely reliable. Wide variety of elements for where curve-matched • 1206 EIA package • Cost effective potential military and aerospace interchangeability is required for precise applications. temperature control and precision Benefits: Surface mount for automated temperature indication such as military, pick and place. Tape and reel for high 121 Series. aerospace, medical and instrumentation volume applications such as PC boards. Features: Hermetically sealed in glass test equipment. Glass-coated ceramic design for long • Enhanced reliability and stablility term reliability. Solder-plated Ni-barrier • Weldable/solderable dumet leads 135 Series. terminations easy to solder. Potential Features: Rugged DO-35 glass for use in high-volume, cost-sensitive Benefits: Shock resistant, rugged, encapsulation • Enhanced temperature applications. 10 Sensing and Productivity Solutions

192 Series. ICL Series. While we provide application assistance Features: Resistance temperature curve Features: Cost effective • Enhanced personally, through our literature and interchangeability • Accuracy • Enhanced reliability • Special high temp protective the Honeywell web site, it is up to the stability • Enhanced life • Cost effective coating • Rugged design • PCB board customer to determine the suitability of the • Small size • Epoxy coated mountable product in the application. Benefits: Resistance temperature- Benefits: Designed to prevent damage to Specifications may change without notice. matched interchangeable units designed other electrical components. ICL absorbs The information we supply is believed to to provide cost savings by eliminating electrical surge and the thermisotor’s be accurate and reliable as of this printing. need for individual resistance temperature resistance decreases by a factor of However, we assume no responsibility for calibration and standardization of circuit 10 to 50; power drop across the ICL is its use. components. Designed to simplify reduced accordingly. For use in potential design and replacement in temperature applications where the inrush of current For more information about Honeywell measurement, indication, control and can damage components in a switching Sensing and Productivity Solutions’ compensation of ambient temperature power supply and other power devices products, call +1-815-235-6847 or 1-800- effects on a variety of integrated circuits when the equipment is turned on. 537-6945, visit sensing.honeywell.com, or and other semiconductor devices. e-mail inquiries to info.sc@honeywell.com 194 Series. Warranty. Honeywell warrants goods of WARNING Features: Resistance temperature curve its manufacture as being free of defective PERSONAL INJURY interchangeability • Accuracy • Enhanced materials and faulty workmanship. stability • Enhanced life • Cost effective Honeywell’s standard product warranty • DO NOT USE these products as • Small size • Epoxy coated • Teflon- applies unless agreed to otherwise by safety or emergency stop devices coated leads Honeywell in writing; please refer to your or in any other application where failure of the product could result in order acknowledgement or consult your Benefits: Resistance temperature- personal injury. local sales office for specific warranty matched interchangeable units designed Failure to comply with these details. If warranted goods are returned to to provide cost savings by eliminating instructions could result in death or Honeywell during the period of coverage, need for individual resistance temperature serious injury. Honeywell will repair or replace, at its calibration and standardization of circuit option, without charge those items it finds components. Simplifies design and WARNING defective. The foregoing is buyer’s sole replacement in temperature measurement, MISUSE OF DOCUMENTATION remedy and is in lieu of all warranties, indication, control and compensation expressed or implied, including those • The information presented in this of ambient temperature effects on a of merchantability and fitness for a catalogue is for reference only. DO variety of integrated circuits and other NOT USE this document as product particular purpose. In no event shall semiconductor devices. installation information. Honeywell be liable for consequential, • Complete installation, operation and special, or indirect damages. 197 Series. maintenance information is provided Features: Rapid response times • Small in the instructions supplied with each size • Epoxy coated product. Failure to comply with these Benefits: Broad range of custom instructions could result in death or resistance and R/T values for potential serious injury. applications including communications, medical, office automation, instrumentation test equipment, and aerospace electronics. Sensing and Productivity Solutions Honeywell 1985 Douglas Drive North 009033-4-EN IL50 Golden Valley, MN 55422 March 2016 honeywell.com Copyright © 2016 Honeywell International Inc. All rights reserved. Sensing and Productivity Solutions 11