134D www.vishay.com Vishay Sprague Wet Tantalum HI-TMP® Capacitors Tantalum Case with Glass-to-Tantalum Hermetic Seal for -55 °C to +200 °C Operation FEATURES • High capacitance • Hermetically sealed, tantalum case Available • +200 °C high temperature Available • Terminations: axial, standard tin / lead (SnPb) • 100 % tin (RoHS-compliant) available • Mounting: through-hole Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE CHARACTERISTICS Note Operating Temperature: -55 °C to +85 °C * This datasheet provides information about parts that are (to +200 °C with voltage derating) RoHS-compliant and / or parts that are non RoHS-compliant. For Capacitance Tolerance: at 120 Hz, +25 °C; ± 20 % example, parts with lead (Pb) terminations are not RoHS-compliant. standard; ± 10 % Please see the information / tables in this datasheet for details DC Leakage Current (DCL Max.): at +25 °C and above: APPLICATIONS leakage current shall not exceed the values listed in th e Standard Ratings tables. • Industrial Life Test: capacitors are capable of withstanding a • Petroleum exploration minimum 500 h life test at a temperature of +200 °C at the • High temperature / high stress environment applicable derated DC working voltage. ORDERING INFORMATION 134D 227 X0 100 K 6 E3 TYPE CAPACITANCE CAPACITANCE DC VOLTAGE RATING CASE STYLE NUMBER RoHS-COMPLIANT TOLERANCE AT +85 °C CODE This is expressed in X0 = ± 20 % This is expressed in volts. See High temperature E3 = 100 % tin picofarads. The first X9 = ± 10 % To complete the three-digit Ratings 8 = no outer termination two digits are the block, zeros precede the and Case insulating sleeve (RoHS-compliant design) significant figures. The voltage rating. A decimal Codes 6 = high Blank = SnPb third is the number of point is indicated by an “R” table temperature termination zeros to follow (6R3 = 6.3 V) film insulation (standard design) (above +125 °C) Note • Packaging: the use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not available due to th e unit weight DIMENSIONS in inches [millimeters] E L E D 1 0.0253 ± 0.002 [0.64 ± 0.05] dia. (No. 22 AWG tinned nickel leads Weld solderable and weldable) L Tantalum 2 CASE CODE WEIGHT (g) D L (1) L (Max.) E TYPE 134D CLR 79 / 81 EQUIV. 1 2 (Max.) 0.188 ± 0.016 0.453 + 0.031 / - 0.016 0.734 1.500 ± 0.250 C T1 2.6 [4.78 ± 0.41] [11.51 + 0.79 / - 0.41] [18.64] [38.10 ± 6.35] 0.281 ± 0.016 0.641 + 0.031 / - 0.016 0.922 2.250 ± 0.250 F T2 6.2 [7.14 ± 0.41] [16.28 + 0.79 / - 0.41] [23.42] [57.15 ± 6.35] 0.375 ± 0.016 0.766 + 0.031 / - 0.016 1.047 2.250 ± 0.250 T T3 11.6 [9.53 ± 0.41] [19.46 + 0.79 / - 0.41] [26.59] [57.15 ± 6.35] 0.375 ± 0.016 1.062 + 0.031 / - 0.016 1.343 2.250 ± 0.250 K T4 17.7 [9.53 ± 0.41] [26.97 + 0.79 / - 0.41] [34.11] [57.15 ± 6.35] Note (1) For insulated parts, add 0.015 inches [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body Revision: 22-Sep-2020 1 Document Number: 40072 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

134D www.vishay.com Vishay Sprague STANDARD RATINGS TYP. AC CAPACITANCE MAX. MAX. DCL (μA) MAX. MAX. CAP. (%) RIPPLE LIFE TEST AT 25 °C CASE120 Hz IMP., Z CAP. 85 °C PART NUMBER PERFORMANCE 12(μ0F H)z CODE E(SR) 25 °C 8152 5° C°C / 200 °C AT (-25) °C AT (-%25) °C 85 °C 125 °C (m4A0 )k RHMzS (h AT +200 °C) 50 V AT 85 °C; 30 V AT 125 °C; 30 V AT 200 °C DC DC DC 68 C 1.50 1 5 50 22 -6 12 55 1400 134D686(1)050C(2)(3) 500 220 F 0.90 2 10 100 9 -15 13 50 2300 134D227(1)050F(2)(3) 500 470 T 0.75 3 25 250 6 -24 10 25 2650 134D477(1)050T(2)(3) 500 680 K 0.70 5 40 400 4 -22 12 40 2900 134D687(1)050K(2)(3) 500 60 V AT 85 °C; 40 V AT 125 °C; 36 V AT 200 °C DC DC DC 47 C 2.00 1 5 50 34 -8 8 12 1250 134D476(1)060C(2)(3) 500 150 F 1.10 2 10 100 13 -11 10 30 2050 134D157(1)060F(2)(3) 500 390 T 0.90 3 25 250 7 -27 10 25 2450 134D397(1)060T(2)(3) 500 560 K 0.80 5 40 400 5 -21 12 40 2700 134D567(1)060K(2)(3) 500 75 V AT 85 °C; 50 V AT 125 °C; 45 V AT 200 °C DC DC DC 33 C 2.50 1 5 50 45 -3.5 8 25 1100 134D336(1)075C(2)(3) 500 110 F 1.30 2 10 100 16 -8 8 30 1900 134D117(1)075F(2)(3) 500 330 T 1.00 3 30 300 8 -30 10 25 2300 134D337(1)075T(2)(3) 500 470 K 0.90 5 50 500 6 -20 10 40 2550 134D477(1)075K(2)(3) 500 100 V AT 85 °C; 65 V AT 125 °C; 60 V AT 200 °C DC DC DC 15 C 3.50 1 5 50 95 -2.5 8 25 950 134D156(1)100C(2)(3) 500 68 F 2.10 2 10 100 25 -6 8 25 1500 134D686(1)100F(2)(3) 500 150 T 1.60 3 25 250 14 -12 8 22 1800 134D157(1)100T(2)(3) 500 220 K 1.20 5 50 500 13 -44 8 15 2200 134D227(1)100K(2)(3) 1000 125 V AT 85 °C; 85 V AT 125 °C; 75 V AT 200 °C DC DC DC 10 C 5.50 1 5 50 145 -2.5 8 20 750 134D106(1)125C(2)(3) 500 47 F 2.30 2 10 100 35 -5 7 20 1450 134D476(1)125F(2)(3) 500 50 F 2.30 3 10 100 35 -5 7 20 1450 134D506(1)125F(2)(3) 500 100 T 1.80 3 25 250 24 -20 8 20 1700 134D107(1)125T(2)(3) 500 150 K 1.60 5 50 500 13 -10 6 12 1900 134D157(1)125K(2)(3) 500 Note • Part number definitions: (1) Capacitance tolerance: X9 = 10 %, X0 = 20 % (2) Style number: 8 = no film insulation, 6 = high temperature film insulation (3) Termination: blank = standard tin/lead, E3 = RoHS-compliant 100 % tin Revision: 22-Sep-2020 2 Document Number: 40072 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

134D www.vishay.com Vishay Sprague EXTENDED RATINGS TYP. AC CAPACITANCE MAX. MAX. DCL (μA) MAX. MAX. CAP. (%) RIPPLE LIFE TEST AT 25 °C CASE120 Hz IMP., Z CAP. 85 °C PART NUMBER PERFORMANCE 12(μ0F H)z CODE E(SR) 25 °C 8152 5° C°C / 200 °C AT -(25) °C AT (-%25) °C85 °C125 °C(m4A0 )k RHMzS (h AT +200 °C) 50 V AT 85 °C; 30 V AT 125 °C; 30 V AT 200 °C DC DC DC C F T K 60 V AT 85 °C; 40 V AT 125 °C; 36 V AT 200 °C DC DC DC C F T 1000 K 0.50 20 120 1200 3 -25 < 12 < 15 3500 134D108(1)060K(2)(3) 500 75 V AT 85 °C; 50 V AT 125 °C; 45 V AT 200 °C DC DC DC C 180 F 1.50 5 25 15 20 2000 134D187(1)075F(2)(3) 500 T 750 K 0.60 20 120 3 -25 < 10 < 15 3500 134D757(1)075K(2)(3) 500 1000 K 0.50 25 90 3 -30 < 20 < 25 3500 134D108(1)075K(2)(3) 500 100 V AT 85 °C; 65 V AT 125 °C; 60 V AT 200 °C DC DC DC C F 220 T 1.60 5 30 300 15 -40 10 15 1800 134D227(1)100T(2)(3) 500 400 K 0.70 10 120 1200 5 -15 10 15 3250 134D407(1)100K(2)(3) 500 470 K 0.70 25 200 2000 8 -15 5 10 3250 134D477(1)100K(2)(3) 1000 560 K 0.70 25 200 2000 5 -25 15 20 5500 134D567(1)100K(2)(3) 1000 750 K 0.90 30 150 1500 4 -30 20 25 4500 134D757(1)100K(2)(3) 500 125 V AT 85 °C; 85 V AT 125 °C; 75 V AT 200 °C DC DC DC C F T 240 K 0.80 10 50 500 10 -10 6 12 2500 134D247(1)125K(2)(3) 500 350 K 0.80 25 250 2500 15 -55 8 12 3250 134D357(1)125K(2)(3) 1000 (1) Notes • In bold and italic: preliminary rating and electrical values. Contact marketing for availability • Part number definitions: (1) Capacitance tolerance: X9 = 10 %, X0 = 20 % (2) Style number: 8 = no film insulation, 6 = high temperature film insulation (3) Termination: blank = standard tin / lead, E3 = RoHS compliant 100 % tin (1) This rating withstands 62 V at 200 °C for 1000 h DC RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIED PEAK VOLTAGE FREQUENCYOF APPLIED RIPPLE 120 Hz 800 Hz 1 kHz 10 kHz 40 kHz 100 kHz CURRENT AMBIENT STILL  55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125  55 85 105 125 AIR TEMP. IN °C 100 % 0.60 0.39 - - 0.71 0.43 - - 0.72 0.46 - - 0.88 0.55 - - 1.0 0.63 - - 1.1 0.69 - - % of 90 % 0.60 0.46 - - 0.71 0.55 - - 0.72 0.55 - - 0.88 0.67 - - 1.0 0.77 - - 1.1 0.85 - - 85 °C rated 80 % 0.60 0.52 0.35 - 0.71 0.62 0.42 - 0.72 0.62 0.42 - 0.88 0.76 0.52 - 1.0 0.87 0.59 - 1.1 0.96 0.65 - peak 70 % 0.60 0.58 0.44 - 0.71 0.69 0.52 - 0.72 0.70 0.52 - 0.88 0.85 0.64 - 1.0 0.97 0.73 - 1.1 1.07 0.80 - voltage 66 2/3 %0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50 Revision: 22-Sep-2020 3 Document Number: 40072 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

134D www.vishay.com Vishay Sprague TYPICAL PERFORMANCE CHARACTERISTICS OF 134D CAPACITORS ELECTRICAL CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Operating temperature range -55 °C to +85 °C (to +200 °C with voltage derating) Capacitor tolerance ± 20 %, ± 10 % at 120 Hz, at +25 °C Capacitor change by temperature Limit per Standard Ratings table ESR Limit per Standard Ratings table, at +25 °C, 120 Hz Impedance Limit per Standard Ratings table, at -55 °C, 120 Hz DCL (leakage current) Limit per Standard Ratings table AC ripple current Limit per Standard Ratings table, at +85 °C and 40 kHz Reverse voltage None Surge voltage shall be in accordance with MIL-PRF-39006 and Table 2 of DSCC93026. The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under Surge voltage any conditions including transients and peak ripple at the highest line voltage. The DC surge voltage is 115 % of rated DC voltage. PERFORMANCE CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Capacitors shall be capable of withstanding a minimum 500 h life test at a temperature +200 °C at Life testing derated voltage. ENVIRONMENTAL CHARACTERISTICS ITEM CONDITION COMMENTS When the capacitors are tested as specified in MIL-PRF-39006, Seal MIL-PRF-39006 there shall be no evidence of leakage. Moisture resistance shall be in accordance with MIL-PRF-39006. Moisture resistance MIL-PRF-39006 Number of cycles: 10 continuous cycles Barometric pressure MIL-STD-202, method 105, condition E Altitude 150 000 feet (reduced) MECHANICAL CHARACTERISTICS ITEM CONDITION COMMENTS MIL-STD-202, method 213, condition I Shock (specified pulse) The capacitors shall meet the requirements of MIL-PRF-39006. (100 g) MIL-STD-202, method 204, condition D Vibration, high frequency The capacitors shall meet the requirements of MIL-PRF-39006. (20 g peak) Thermal shock shall be in accordance with MIL-PRF-39006 when Thermal shock MIL-STD-202, method 107, condition A tested for 30 cycles. MIL-STD-202, method 208, Solderability Solderability shall be in accordance with MIL-PRF-39006. ANSI/J-STD-002, test A Terminal strength MIL-STD-202, method 211 Terminal strength shall be in accordance with MIL-PRF-39006. Resistance to solder heat MIL-STD-202, method 210, condition C The capacitors shall meet the requirements of MIL-PRF-39006. Terminals shall be as specified in MIL-STD-1276. The length and diameter of the terminals shall be as specified in Dimensions table. Terminals MIL-STD-1276 All terminals shall be permanently secured internally and externally, as applicable. All external joints shall be welded. Marking of capacitors conforms to method I of MIL-STD-1285 and Marking MIL-STD-1285 include capacitance (in μF), capacitance tolerance letter, rated voltage, date code, lot symbol, and Vishay trademark. SELECTOR GUIDES Tantalum Selector Guide www.vishay.com/doc?49054 Parameter Comparison Guide www.vishay.com/doc?42088 Revision: 22-Sep-2020 4 Document Number: 40072 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROV E RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose o r the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustainin g applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk . Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this documen t or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000