1000 Series Miniature Slide Switches Features/Benefits Typical Applications • V ariety of actuators and terminations • T est & measurement equipment • P anel mount tabs available • Telecommunications • Epoxy terminal seal—compatible with • Computer & peripherals bottom-wash cleaning • RoHS compliant Models Available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ CASE: diallyl phthalate (DAP), (UL 94V-0). I 20 V AC or DC max. Q contact material: 6 AMPS @ ACTUATOR: Nylon, black, standard. 120 V AC or 28 V DC, 3 AMPS @ 250 V AC. HOUSING: Stainless steel. S See page I-16 for additional ratings. SWITCH SUPPORT: Brass or steel, matte-tin plated. li ELECTRICAL LIFE: 100,000 make-and-break cycles at full d load on models with B, K or P contact material; 40,000 cycles END CONTACTS: B contact material: Copper alloy, with gold plate over e on models with G, Q, L, M, S or R contact material. nickel plate. Q contact material: Coin silver, silver plated. See page I-16 for additional contact materials. CONTACT RESISTANCE: Below 10 m Ω typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. CENTER CONTACT & ALL TERMINALS: B contact material: Copper INSULATION RESISTANCE: 109 Ω min. alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page I-16 for additional contact materials. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical OPERATING TEMPERATURE: –30ºC to 65ºC Data chapter SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I–12 through I– 16. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Switch Function 1101 SP On-None-On 1103 SP On-Off-On 1108 SP Mom-None-On 1201 DP On-None-On 1203 DP On-Off-On Mounting Style M2 PC mount without tabs M1 Panel mount with tabs Actuator S3 .200” high S1 .040” high Terminations S2 .140” high A Right angle, PC thru-hole Contact Material S4 .285” high C PC Thru-hole B Gold S5 .370” high AV2 Vertical right angle, PC thru-hole Q Silver S6 .485” high Z Solder lug G Gold over silver Seal T3 .200” high V3 V-bracket P Gold, matte-tin E Epoxy V4 V-bracket S Silver, matte-tin D No epoxy seal W .750” long, wire wrap R Gold over silver, matte-tin I Epoxy potted base Z3 Quick connect Actuator Color 2 Black 1 White 3 Red Dimensions are shown: Inches (mm) 19 dec 18 Specifications and dimensions subject to change www.ckswitches.com I–11

1000 Series Miniature Slide Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL POLES NO. SCHEMATIC 1101 ON NONE ON N/A SP 1103 ON OFF ON 1-2 OPEN 2-3 1108 MOM. NONE ON N/A SPDT SPDT 0.95 (2,41) I e d i l S Part number shown: 1101M2S3CQE2 1201 ON NONE ON DP 2-1,5-4 OPEN 2-3,5-6 1203 ON OFF ON DPDT DPDT Actuator shown in position 1 Part number shown: 1201M2S3CQE2 Terminal Nos. For Reference Only MOM. = Momentary All models with all options when ordered with G, Q, S or R contact material. MOUNTING STYLE M2   M1   PC MOUNTING WITHOUT TABS PANEL MOUNTING WITH TABS NOTE: Available with C, W, Z, Z3 terminations only. NOTE: Available with A, AV2, C, V3, V4, W terminations only. No mounting hardware supplied. PANEL MOUNTING .275 (6,99) All actuators except T3. For T3 actuator only. Single pole Double pole Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 19 dec 18 www.ckswitches.com I–12

1000 Series Miniature Slide Switches ACTUATOR COLOR ACTUATOR ACTUATOR S3   S2   S1   S4   .200” HIGH .140” HIGH .040” HIGH .285” HIGH * * * * 110X models only. 120X models only. I S5   S6   T3   .370” HIGH .485” HIGH .200” HIGH OPTION ACTUATOR S CODE COLOR l i d 2 BLACK e * 1 WHITE * 3 RED * 7 BLUE 9 GRAY 120X models only. Other colors available, consult Customer Service Center. * Subtract .014 (0,36) from actuator height, all models with A, AV2 - 2 pole, V3, V4 terminations. TERMINATIONS Z  SOLDER LUG C  PC THRU-HOLE .075 EPOXY SEAL [1,91] PC MOUNTING [3.1,9525] DIM "B' .075 .080 [1,91] [2,03] EPOXYSEAL DIM "A" .048 [1,22] .188 .188 [4,78] [4,78] OPTION DIM "A" DIM "B" C .050 [0,76] .250 [ 6,35] Not available with P, S or R SPDT & DPDT contact materials. SPDT & DPDT Z3   W   QUICK CONNECT WIRE WRAP .750 (19,05) Not available with P, S or R contact materials. Mating quick connector available; order part SPDT & DPDT number 530100000, page I-16. SPDT & DPDT Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 19 dec 18 www.ckswitches.com I–13

1000 Series Miniature Slide Switches TERMINATIONS A   RIGHT ANGLE, PC THRU-HOLE PC MOUNTING 1101M2S3ABE2 Horizontal Actuation SECTION A-A SPDT Actuator Shown In Pos. 1 I Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. e d Sli A  RIGHT ANGLE, PC THRU-HOLE PC MOUNTING 1201M2S3ABE2 Horizontal Actuation SECTION A-A DPDT Actuator Shown In Pos. 1 Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING .200 (5,08) 1101M2S3AV2BE2 Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A SPDT Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. Dimensions are shown: Inch (mm) 19 dec 18 Specifications and dimensions subject to change www.ckswitches.com I–14

1000 Series Miniature Slide Switches TERMINATIONS AV2   VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150” PITCH PC MOUNTING 1201M2S3AV2BE2 SECTION A-A Vertical Actuation I Actuator Shown In Pos. 1 DPDT Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. S l i d V3, V4   VERTICAL MOUNT, e V-BRACKET PC MOUNTING OPTION CODE DIM ‘A’ V3 .350 (8,89) V4 .525 (13,34) 1101M2S3__BE2 SPDT Actuator Shown In Pos. 1 Not available with M1 mounting style and I seal. V3, V4   VERTICAL MOUNT, V-BRACKET PC MOUNTING OPTION CODE DIM ‘A’ V3 .400 (10,16) V4 .575 (14,61) 1201M2S3__BE2 DPDT Actuator Shown In Pos. 1 Not available with M1 mounting style and I seal. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 19 dec 18 www.ckswitches.com I–15

1000 Series Miniature Slide Switches CONTACT MATERIAL OPTION CONTACT TERMINAL CODE MATERIAL PLATING RATINGS B GOLD 1 GOLD 3 LOW LEVEL/ 0.4 VA MAX. @ 20 V AC OR DC MAX. P MATTE-TIN 6 DRY CIRCUIT Q SILVER 4 SILVER 4,5 POWER 6 AMPS @ 120 V AC OR 28 V DC; 3 AMPS @ 250 V AC. MATTE-TIN 6 S G GOLD OVER GOLD 3 LOW LEVEL/DRY 0 4 VA MAX @ 20 V AC OR DC MAX OR 6 AMPS @ 120 V AC OR I SILVER 2,3 MATTE-TIN 6 CIRCUIT OR POWER 0.4 MAX. 28 V DC; 3 AMPS @ 250 V AC. R e * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. d Sli 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. Acoll nmtaocdt emlsa t e r i a l . with all options when ordered with G, Q, S or R 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with all terminations except C, Z, Z3.. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. Q contact material standard with C, Z, Z3 terminations. 4 END CONTACTS: Coin silver, silver plated. P, S or R contact materials not available with Z, Z3 terminations. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant. SEAL E   D   I   EPOXY SEAL NO EPOXY SEAL EPOXY POTTED BASE NOTE: Available with C, W, W3, Z, Z3 terminations only. AVAILABLE HARDWARE Fits Z3 Termination female connector PART NO. 530100000 Available in loose pieces. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 19 dec 18 www.ckswitches.com I–16