3M™ Mini D Ribbon (MDR) Connectors .050" IDC Wiremount Plug - Shielded 101 Series • Wiper-on-wiper contact for reliable repetitive plugging • MDR digital LCD interface as a 20 or 26 contact connector • IEEE 1284C Interface as a 36 contact connector • Accepts a wide variety of cable constructions including flat, round, twisted pair and twinax cables • Accepts a wide variety of shielded junction shells • Contacts: 14, 20, 26, 36, 40, 50, 68, 80 and 100 • RoHS Compliant. See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnector.com for compliance information (RIA E1 & C1 apply) Date Modified: July 19, 2010 TS-0423-B Sheet 1 of 3 Physical Insulation Material: Glass Reinforced Polyester Flammability: UL 94V-0 Body Color: Black Cover Color: Black, Gray Contact: Material: Beryllium Copper Underplating: 80 μ" [2.0 μm] Nickel Wiping Area Plating: 30 μ" [0.76 μm] Min. Gold IDC Contacts Plating: Gold flash Shroud: Material: Steel Plating: Nickel Wire Accommodation: Black Cover: 28 AWG Stranded, 30 AWG Solid (Insulation Diameter = 0.7 mm Max.) Gray Cover: 26 AWG Solid (Insulation Diameter = 0.7 mm to 0.9 mm) Marking: 3M Logo and Part Number Electrical Current Rating: 1 A Insulation Resistance: >1 × 108Ω at 500 V DC Withstanding Voltage: 500 V for 1 Minute RMS Environmental Temperature Rating: -20°C to +85°C UL File No.: E68080 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3Mconnector.com

3M™ Mini D Ribbon (MDR) Connectors .050" IDC Wiremount Plug - Shielded 101 Series Dimensions Contact Quantity A B C D 14 .300 [ 7.62 ] .54 [ 13.8 ] .72 [ 18.2 ] .58 [ 14.7 ] 26 .600 [ 15.24 ] .84 [ 21.4 ] 1.02 [ 25.8 ] .88 [ 22.4 ] 50 1.200 [ 30.48 ] 1.44 [ 36.6 ] 1.62 [41.1 ] 1.48 [ 37.6 ] Body (14, 26 and 50 positions) Cover Assembly .21 [ 5.2 ] .025 [ 0.64 ] 0 Position .050 Last Position (See Note 1) [ 1.27 ] .126 [ 3.20 ] .13 [ 3.2 ] .189 Position 3 [ 4.80 ] Cover 1 Position 1 .06 (See Note 2) Position 2 D [ 1.5 ] [ 4.1.58 ] 1XX [ .62.66 ] [ .72.94 ] 10 .50 [ 12.7 ] C Body .13 [ 3.20 ] Cover 2 Position 2 Position 3 .050 .08 [ 2.0 ] Position 1 [ 1.27 ] .30 .36 [ 7.5 ] [ 9.1 ] .26 .29 [ 6.5 ] [ 7.3 ] Last Position Position (See Notes) 15° D inch A [mm] B Tolerance Unless Noted .0 .00 0.00 Notes: inch ±.1 ±.01 ±.005 1.Circle (0) position indicates #1 position in cable, when utilizing 0.025" pitch flat cable. [ ] Dimensions for 2.Triangle ( ∇ ) position indicates #2 position in cable, when utilizing 0.025" pitch flat cable. Reference Only Ordering Information (See page 3 for other sizes and assembly tools.) 101XX - 60X0EC Wiping Interface Plating: Contact Quantity: C = 30 μm [ 0.76 mm ] Min. Gold over Ni (see Table) Note: 100 pos = A0 IDC Plating: E = Gold Flash over Ni Wire Accommodation: (App E1 & C1 apply) 0 = Black Cover: 28 AWG Stranded, 30 AWG Solid TS-0423-B 1 = Gray Cover: 26 AWG Solid (Available in 68 Contact Only) Sheet 2 of 3 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3Mconnector.com

3M™ Mini D Ribbon (MDR) Connectors .050" IDC Wiremount Plug - Shielded 101 Series Dimensions Contact Quantity A B C D 20 .450 [ 11.43 ] .69 [ 17.6 ] .87 [ 22.0 ] .73 [ 18.6 ] 36 .850 [ 21.59 ] 1.09 [ 27.8 ] 1.27 [ 32.2 ] 1.13 [ 28.7 ] 40 .950 [ 24.13 ] 1.19 [ 30.3 ] 1.37 [ 34.7 ] 1.23 [ 31.3 ] Cover Assembly .21 68 1.650 [ 41.91 ] 1.89 [ 48.1 ] 2.07 [ 52.5 ] 1.93 [ 49.0 ] [ 5.33 ] 80 1.950 [ 49.53 ] 2.16 [ 54.8 ] 2.37 [ 60.1 ] 2.23 [ 56.7 ] 100 2.450 [ 62.23 ] 2.66 [ 67.5 ] 2.87 [ 72.8 ] 2.73 [ 69.4 ] Body (20, 36, 40, 68, 80 and 100 positions) .025 .13 .126 [ 0.64 ] [ 3.30 ] [ 3.20 ] .050 Last 0 Position [ 1.27 ] Position (See Note 1) .189 Cover 1 .06 [ 4.80 ] [ 1.5 ] D .26 .29 [ 6.6 ] [ 7.4 ] Position 3 Position 1 Position 2 (See Note 2) X X .13 1 .50 10 [ 12.7 ] [ 3.20 ] Cover 2 C .08 [ 2.0 ] Body .18 [ 4.5 ] Position 2 Position 3 .050 .29 Position 1 [ 1.27 ] [ 7.3 ] .30 .36 .26 [ 7.5 ] [ 9.1 ] [ 6.5 ] D Last Position Position inch [mm] 15° (See Notes) Tolerance Unless Noted A .0 .00 0.00 B inch ±.1 ±.01 ±.005 Notes: 1.Circle (0) position indicates #1 position in cable, when utilizing 0.025" pitch flat cable. [ ] Dimensions for Reference Only 2.Triangle ( ∇ ) position indicates #2 position in cable, when utilizing 0.025" pitch flat cable. Ordering Information 101XX - 60X0EC Assembly tools: 3M™ Hand Press Kit Wiping Interface Plating: 3829 (68 position & below). All Sizes: Contact Quantity: C = 30 μm [ 0.76 mm ] Min. Gold 3M™ Assembly Press 10960-2000; 3M™ (see Table) over Ni Lacing Fixture 10962-2000, 3M™ Cutting Note: 100 pos = A0 Unit 10961 & 3M™ Wire Clamp 10964-1 IDC Plating: (14-50 pos.) or 3M™ Wire Clamp Wire Accommodation: E = Gold Flash over Ni 10964-2 (68-100 pos.). 0 = Black Cover: 28 AWG Stranded, 30 AWG Solid (App E1 & C1 apply) 1 = Gray Cover: 26 AWG Solid (Available in 68 Contact Only) TS-0423-B Sheet 3 of 3 3 3M is a trademark of 3M Company. Electronic Solutions Division For technical, sales or ordering information call Interconnect Solutions 800-225-5373 http://www.3Mconnector.com

Important Notice All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.  3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. Please recycle. Printed in USA. 1-800-225-5373 © 3M 2010. All rights reserved. www.3Mconnector.com RIA-2217B-E 3M is a trademark of 3M Company.

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 3 M: 10136-6000EC 10150-6000EC 10180-6000EC 10120-6000EC