1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance Case Style 1.5KE • AEC-Q101 qualified • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS Use in sensitive electronics protection against voltage V uni-directional 6.8 V to 540 V BR transients induced by inductive load switching and lighting V bi-directional 6.8 V to 220 V BR on ICs, MOSFET, signal lines of sensor units for consumer, V uni-directional 5.8 V to 459 V WM computer, industrial, automotive, and telecommunication. V bi-directional 5.8 V to 185 V WM P 1500 W MECHANICAL DATA PPM PD 6.5 W Case: molded epoxy body over passivated junction IFSM (uni-directional only) 200 A Molding compound meets UL 94 V-0 flammability rating T max. 175 °C Base P/N-E3 - RoHS compliant, commercial grade J Polarity Uni-directional, bi-directional Base P/NHE3_X - RoHS compliant, and AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...) Package 1.5KE Terminals: matte tin plated leads, solderable per DEVICES FOR BI-DIRECTION APPLICATIONS J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix For bi-directional types, use CA suffix (e.g. 1.5KE220CA) meets JESD 201 class 2 whisker test Electrical characteristics apply in both directions. Note • 1.5KE250A to 1.5KE540A are commercial grade only • Bi-directional is available from 1.5KE6.8CA to 1.5KE220CA only Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) P 1500 W PPM Peak pulse current with a 10/1000 μs waveform (1) I See next table A PPM Power dissipation on infinite heatsink at T = 75 °C (fig. 5) P 6.5 W L D Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I 200 A FSM Maximum instantaneous forward voltage at 100 A for uni-directional only (3) V 3.5/5.0 V F Operating junction and storage temperature range T , T -55 to +175 °C J STG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) V = 3.5 V for 1.5KE220A and below; V = 5.0 V for 1.5KE250A and above F F Revision: 08-Mar-18 1 Document Number: 88301 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A BREAKDOWN MAXIMUM MAXIMUM MAXIMUM MAXIMUM VOLTAGE TEST STAND-OFF REVERSE PEAK JEDEC® GENERAL CLAMPING TEMPERATURE V AT I (1) CURRENT VOLTAGE LEAKAGE PULSE TYPE SEMICONDUCTOR BR T VOLTAGE COEFFICIENT (V) I V AT V CURRENT NUMBER PART NUMBER T WM WM AT I OF V (mA) (V) I (4) I (2) PPM BR MIN. MAX. (DμA) PP(AM) VC (V) (%/°C) 1N6267A (+)1.5KE6.8A 6.45 7.14 10 5.80 1000 143 10.5 0.057 1N6268A (+)1.5KE7.5A 7.13 7.88 10 6.40 500 133 11.3 0.061 1N6269A (+)1.5KE8.2A 7.79 8.61 10 7.02 200 124 12.1 0.065 1N6270A (+)1.5KE9.1A 8.65 9.55 1.0 7.78 50 112 13.4 0.068 1N6271A (+)1.5KE10A 9.50 10.5 1.0 8.55 10 103 14.5 0.073 1N6272A (+)1.5KE11A 10.5 11.6 1.0 9.40 5.0 96.2 15.6 0.075 1N6273A (+)1.5KE12A 11.4 12.6 1.0 10.2 5.0 89.8 16.7 0.078 1N6274A (+)1.5KE13A 12.4 13.7 1.0 11.1 5.0 82.4 18.2 0.081 1N6275A (+)1.5KE15A 14.3 15.8 1.0 12.8 1.0 70.8 21.2 0.084 1N6276A (+)1.5KE16A 15.2 16.8 1.0 13.6 1.0 66.7 22.5 0.086 1N6277A (+)1.5KE18A 17.1 18.9 1.0 15.3 1.0 59.5 25.2 0.089 1N6278A (+)1.5KE20A 19.0 21.0 1.0 17.1 1.0 54.2 27.7 0.090 1N6279A (+)1.5KE22A 20.9 23.1 1.0 18.8 1.0 49.0 30.6 0.092 1N6280A (+)1.5KE24A 22.8 25.2 1.0 20.5 1.0 45.2 33.2 0.094 1N6281A (+)1.5KE27A 25.7 28.4 1.0 23.1 1.0 40.0 37.5 0.096 1N6282A (+)1.5KE30A 28.5 31.5 1.0 25.6 1.0 36.2 41.4 0.097 1N6283A (+)1.5KE33A 31.4 34.7 1.0 28.2 1.0 32.8 45.7 0.098 1N6284A (+)1.5KE36A 34.2 37.8 1.0 30.8 1.0 30.1 49.9 0.099 1N6285A (+)1.5KE39A 37.1 41.0 1.0 33.3 1.0 27.8 53.9 0.100 1N6286A (+)1.5KE43A 40.9 45.2 1.0 36.8 1.0 25.3 59.3 0.101 1N6287A (+)1.5KE47A 44.7 49.4 1.0 40.2 1.0 23.1 64.8 0.101 1N6288A (+)1.5KE51A 48.5 53.6 1.0 43.6 1.0 21.4 70.1 0.102 1N6289A (+)1.5KE56A 53.2 58.8 1.0 47.8 1.0 19.5 77.0 0.103 1N6290A (+)1.5KE62A 58.9 65.1 1.0 53.0 1.0 17.6 85.0 0.104 1N6291A (+)1.5KE68A 64.6 71.4 1.0 58.1 1.0 16.3 92.0 0.104 1N6292A (+)1.5KE75A 71.3 78.8 1.0 64.1 1.0 14.6 104 0.105 1N6293A (+)1.5KE82A 77.9 86.1 1.0 70.1 1.0 13.3 113 0.105 1N6294A (+)1.5KE91A 86.5 95.5 1.0 77.8 1.0 12.0 125 0.106 1N6295A (+)1.5KE100A 95.0 105 1.0 85.5 1.0 10.9 137 0.106 1N6296A (+)1.5KE110A 105 116 1.0 94.0 1.0 9.9 152 0.107 1N6297A (+)1.5KE120A 114 126 1.0 102 1.0 9.1 165 0.107 1N6298A (+)1.5KE130A 124 137 1.0 111 1.0 8.4 179 0.107 1N6299A (+)1.5KE150A 143 158 1.0 128 1.0 7.2 207 0.106 1N6300A (+)1.5KE160A 152 168 1.0 136 1.0 6.8 219 0.108 1N6301A (+)1.5KE170A 162 179 1.0 145 1.0 6.4 234 0.108 1N6302A (+)1.5KE180A 171 189 1.0 154 1.0 6.1 246 0.108 1N6303A (+)1.5KE200A 190 210 1.0 171 1.0 5.5 274 0.108 - (+)1.5KE220A 209 231 1.0 185 1.0 4.6 328 0.108 - 1.5KE250A 237 263 1.0 214 1.0 4.4 344 0.110 - 1.5KE300A 285 315 1.0 256 1.0 3.6 414 0.110 - 1.5KE350A 333 368 1.0 300 1.0 3.1 482 0.110 - 1.5KE400A 380 420 1.0 342 1.0 2.7 548 0.110 - 1.5KE440A 418 462 1.0 376 1.0 2.5 602 0.110 - 1.5KE480A 456 504 1.0 408 1.0 2.28 658 0.110 - 1.5KE510A 485 535 1.0 434 1.0 2.15 698 0.110 - 1.5KE540A 513 567 1.0 459 1.0 2.03 740 0.110 Notes (1) Pulse test: tp  50 ms (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bi-directional types with V 10 V and less the I limit is doubled R D (+) Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number E136766 for both uni-directional and bi-directional devices Revision: 08-Mar-18 2 Document Number: 88301 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (T = 25 °C unless otherwise noted) A PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient R 75 JA °C/ W Typical thermal resistance, junction to lead R 15.4 JL ORDERING INFORMATION (Example) PREFERRED PIN UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.5KE6.8A-E3/54 0.968 54 1400 13" diameter paper tape and reel 1.5KE6.8AHE3_A/C (1)(2) 0.968 C 1400 13" diameter paper tape and reel Notes (1) AEC-Q101 qualified (2) Applied for 1.5KE6.8AHE3_A to 1.5KE220AHE3_A, and 1.5KE6.8CAHE3_A to 1.5KE220CAHE3_A RATINGS AND CHARACTERISTICS CURVES (T = 25 °C unless otherwise noted) A 100 150 T = 25 °C J W) RSM tr = 10 µs Pisu dlseefi nWeidd tahs ( tthd)e Point ower (k 10 ent, % I 100 PIPePaMkValue wdehcearyes t htoe 5P0e a%k oCfu IrPrPeMnt ak Pulse P Pulse Curr HIPaPlMf Value - IP2P P- Pe PPM 1 - Peak PM 50 1a0s/1d0e0fi0neµds bWyaRv.eEfo.Arm. P I t d 0.1 0 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 2.0 3.0 4.0 td - Pulse Width (s) t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 3 - Pulse Waveform 100 10 000 )PP Uni-Directional nt (I Bi-Directional e% Currge, 75 )Fp VR = 0 Pulse Power (P) or PPDerating in Percenta 5205 ( ecnaticapaC - CJ1100000 TJ =VS 2Rta5 =n ° dCR-Oatfef dVoltage k f = 1.0 MHz Pea Vsig = 50 mVp-p 0 10 0 25 50 75 100 125 150 175 200 5 10 100 500 TJ - Initial Temperature (°C) VBR - Breakdown Voltage (V) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 4 - Typical Junction Capacitance Revision: 08-Mar-18 3 Document Number: 88301 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor 8.0 100 e Waveform: )W( n 76..00 ng Voltag 20 1Δ0V/C1 0=0 V0Cµ -s VImBRpulse 1.51K.E5K20E0130 1.5KE75 o pi 10 ita 5.0 m p a is Cl 1.5KE39 siD 4.0 al 2.0 rewoP - PD 32..00 LL e=a d0 .L3e7n5g" t(h9s.5 mm) - IncrementC 10..02 111...555KKKEEE693..381 1.0 V Δ 0 0.1 0 25 50 75 100 125 150 175 200 0.5 1 2 10 50 TL - Lead Temperature (°C) IPP - Peak Pulse Current (A) Fig. 5 - Power Derating Curve Fig. 8 - Incremental Clamping Voltage Curve (Uni-directional) 200 100 ent (A) 100 8T.J3 = m TsJ Smianxg.le Half Sine-Wave g Voltage 20 1ΔW0Va/C1v 0e=0f oV0rCmµ -s: VImBRpulse 1.5KE200C Curr mpin 10 Surge al Cla 11.5.5KKEE7359CC ward ment 12..00 11..55KKEE1350CC eak For - IncreC 1.5KE171.C5C P V 0.2 Δ 10 0.1 1 10 100 0.5 1 2 10 20 50 Number of Cycles at 60 Hz IPP - Peak Pulse Current (A) Fig. 6 - Maximum Non-Repetitive Forward Surge Current Fig. 9 - Incremental Clamping Voltage Curve (Bi-directional) Uni-Directional only 100 100 age W8/2a0veµfsorImm:pulse 1.5KE200 age W8/2a0veµfsorImm:pulse Volt ΔVC = VC - VBR 1.5KE130 Volt 20 ΔVC = VC - VBR 1.5KE200C mping 1200 1.15.K5EK1E0705 mping 10 1.5KE751C.5KE39C a a Cl Cl 1.5KE30C ntal 2.0 1.5KE39 ntal 2 1.5KE15C eme 1.0 11..55KKEE63.38 eme 1 1.5KE11C - IncrC 111...555KKKEEE911.281 - IncrC 1.5KE7.5C V 0.2 V 0.2 Δ Δ 0.1 0.1 0.5 1 2 10 20 50 0.5 1 2.0 10 20 50 I - Peak Pulse Current (A) I - Peak Pulse Current (A) PP PP Fig. 7 - Incremental Clamping Voltage Curve (Uni-Directional) Fig. 10 - Incremental Clamping Voltage Curve (Bi-Directional) Revision: 08-Mar-18 4 Document Number: 88301 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A www.vishay.com Vishay General Semiconductor 100 100 A) )W d Current ( 10 /C°( ecnad 10 ar ep w m For I la s m eou 1 T = 25 °C reh 1 n J T Instanta P1 u%ls eD uWtyid Cthy c=l e300 µs tneisnarT 0.1 0.1 0 0.4 0.8 1.2 1.6 2.0 0.001 0.01 0.1 1 10 100 1000 Instantaneous Forward Voltage (V) t - Pulse Duration (s) p Fig. 11 - Instantaneous Forward Voltage Characteristics Curve Fig. 12 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style 1.5KE 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.042 (1.07) 0.038 (0.96) DIA. APPLICATION NOTES • This series of Silicon Transient Suppressors is used in • This Transient Voltage Suppressor diode has a pulse applications where large voltage transients can power rating of 1500 W for 1 ms. The response time of permanently damage voltage-sensitive components. TVS diode clamping action is effectively instantaneous • The TVS diode can be used in applications where (1 x 10-9 s bi-directional); therefore, they can protect induced lightning on rural or remote transmission integrated circuits, MOS devices, hybrids, and other lines presents a hazard to electronic circuitry voltage sensitive semiconductors and components. TVS (ref: R.E.A. specification P.E. 60). diodes can also be used in series or parallel to increase the peak power ratings. Revision: 08-Mar-18 5 Document Number: 88301 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: V ishay: 1.5KE250CA-E3/4 1.5KE10/54 1.5KE100/54 1.5KE100A/4 1.5KE100A/54 1.5KE100A/73 1.5KE100A-E3/4 1.5KE100A-E3/51 1.5KE100A-E3/54 1.5KE100A-E3/73 1.5KE100AHE3/54 1.5KE100AHE3/73 1.5KE100C/23 1.5KE100C/54 1.5KE100CA/23 1.5KE100CA/4 1.5KE100CA/54 1.5KE100CA-E3/23 1.5KE100CA-E3/4 1.5KE100CA-E3/51 1.5KE100CA-E3/54 1.5KE100CA-E3/73 1.5KE100CAHE3/54 1.5KE100CAHE3/73 1.5KE100C- E3/23 1.5KE100C-E3/51 1.5KE100C-E3/54 1.5KE100C-E3/73 1.5KE100CHE3/54 1.5KE100CHE3/73 1.5KE100- E3/4 1.5KE100-E3/51 1.5KE100-E3/54 1.5KE100-E3/73 1.5KE100HE3/54 1.5KE100HE3/73 1.5KE10A/4 1.5KE10A/54 1.5KE10A-E3/4 1.5KE10A-E3/51 1.5KE10A-E3/54 1.5KE10A-E3/73 1.5KE10AHE3/54 1.5KE10AHE3/73 1.5KE10C/23 1.5KE10C/54 1.5KE10CA/23 1.5KE10CA/4 1.5KE10CA/54 1.5KE10CA-E3/23 1.5KE10CA-E3/4 1.5KE10CA-E3/51 1.5KE10CA-E3/54 1.5KE10CA-E3/73 1.5KE10CAHE3/54 1.5KE10CAHE3/73 1.5KE10C-E3/23 1.5KE10C-E3/51 1.5KE10C-E3/54 1.5KE10C-E3/73 1.5KE10CHE3/54 1.5KE10CHE3/73 1.5KE10- E3/4 1.5KE10-E3/51 1.5KE10-E3/54 1.5KE10-E3/73 1.5KE10HE3/54 1.5KE10HE3/73 1.5KE11/54 1.5KE110/54 1.5KE110A/23 1.5KE110A/4 1.5KE110A/54 1.5KE110A/73 1.5KE110A-E3/23 1.5KE110A-E3/4 1.5KE110A-E3/51 1.5KE110A-E3/54 1.5KE110A-E3/73 1.5KE110AHE3/54 1.5KE110AHE3/73 1.5KE110C/23 1.5KE110C/4 1.5KE110C/54 1.5KE110CA/23 1.5KE110CA/4 1.5KE110CA/54 1.5KE110CA-E3/23 1.5KE110CA-E3/4 1.5KE110CA-E3/51 1.5KE110CA-E3/54 1.5KE110CA-E3/73 1.5KE110CAHE3/54 1.5KE110CAHE3/73 1.5KE110C- E3/23 1.5KE110C-E3/4 1.5KE110C-E3/51 1.5KE110C-E3/54 1.5KE110C-E3/73 1.5KE110CHE3/54