X7R Dielectric General Specifications X7R formulations are called “temperature stable” ceramics and fall into EIA Class II materials. X7R is the most popular of these intermediate dielectric constant materials. Its temperature variation of capacitance is within ±15% from -55°C to +125°C. This capacitance change is non-linear. Capacitance for X7R varies under the influence of electrical operating con-ditions such as voltage and frequency. X7R dielectric chip usage covers the broad spectrum of industrial applications where known changes in capacitance due to applied voltages are acceptable. PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION) 0805 5 С 103 M A T 2 A Size Voltage Dielectric Capacitance Capacitance Failure Terminations Packaging Special (L” x W”) 4V = 4 X7R = C Code (In pF) Tolerance Rate T = Plated Ni and Sn 2 = 7” Reel Code 6.3V = 6 2 Sig. Digits + J = ± 5%* A = Not Z= FLEXITERM®** 4 = 13” Reel A = Std. 10V = Z Number of Zeros K = ±10% Applicable Product *Optional termination 16V = Y M = ± 20% Contact 25V = 3 **See FLEXITERM® Factory For 50V = 5 *≤1μF only, X7R section Multiples 100V = 1 contact factory for 200V = 2 additional values 500V = 7 NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values. The Important Information/Disclaimer is incorporated in these specifications 18 by reference and should be reviewed in full before placing any order. 100819

X7R Dielectric Specifications and Test Methods Parameter/Test X7R Specification Limits Measuring Conditions Operating Temperature Range -55ºC to +125ºC Temperature Cycle Chamber Capacitance Within specified tolerance ≤ 10% for ≥ 50V DC rating≤ 12.5% for 25V DC rating Freq.: 1.0 kHz ± 10% ≤ 12.5% for 25V and 16V DC rating Voltage: 1.0Vrms ± .2V Dissipation Factor ≤ 12.5% for ≤ 10V DC rating For Cap > 10µF, 0.5Vrm @ 120Hz Contact Factory for DF by PN 100,000MΩ or 1000MΩ - µF, Charge device with rated voltage for Insulation Resistance whichever is less 120 ± 5 secs @ room temp/humidity Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited Dielectric Strength No breakdown or visual defects to 50 mA (max) Note: Charge device with 150% of rated voltage for 500V devices. Appearance No defects Capacitance ≤ ±12% Resistance to Variation Deflection: 2mm Flexure Dissipation Test Time: 30 seconds Meets Initial Values (As Above) Stresses Factor Insulation ≥ Initial Value x 0.3 Resistance ≥ 95% of each terminal should be covered with Dip device in eutectic solder at 230 ± 5ºC Solderability fresh solder for 5.0 ± 0.5 seconds Appearance No defects, <25% leaching of either end terminal Capacitance ≤ ±7.5% Variation Resistance to DisFsaicptaotrion Meets Initial Values (As Above) sDeipc odnedvsic. eS tino reeu atet crotiocm so tledmerp aetr a2t6u0reº Cfo fro 2r 46 0± Solder Heat Insulation 2hours before measuring electrical properties. Meets Initial Values (As Above) Resistance Dielectric Meets Initial Values (As Above) Strength Appearance No visual defects Step 1: -55ºC ± 2º 30 ± 3 minutes Capacitance ≤ ±7.5% Step 2: Room Temp ≤ 3 minutes Variation Dissipation Meets Initial Values (As Above) Step 3: +125ºC ± 2º 30 ± 3 minutes Thermal Shock Factor Insulation Meets Initial Values (As Above) Step 4: Room Temp ≤ 3 minutes Resistance Dielectric Repeat for 5 cycles and measure after 24 ± 2 Meets Initial Values (As Above) Strength hours at room temperature Appearance No visual defects Capacitance ≤ ±12.5% Charge device with 1.5 rated voltage (≤ 10V) in Variation test chamber set at 125ºC ± 2ºC for 1000 hours Dissipation (+48, -0) ≤ Initial Value x 2.0 (See Above) Factor Load Life RInessuislatatinocne ≥ Initial Value x 0.3 (See Above) buIft RthVe >re 1 a0rVe tehxecne pLitfioe nTse s(pt lveoalstaeg ceo wntiall cbte A 2VxXR fVo r further details on exceptions) Dielectric Remove from test chamber and stabilize at room Meets Initial Values (As Above) Strength temperature for 24 ± 2 hours before measuring. Appearance No visual defects Capacitance ≤ ±12.5% Store in a test chamber set at 85ºC ± 2ºC/ 85% ± Variation 5% relative humidity for 1000 hours (+48, -0) with Dissipation rated voltage applied. Load ≤ Initial Value x 2.0 (See Above) Factor Humidity Insulation Remove from chamber and stabilize at room ≥ Initial Value x 0.3 (See Above) Resistance temperature and humidity for 24 ± 2 hours before measuring. Dielectric Meets Initial Values (As Above) Strength The Important Information/Disclaimer is incorporated in these specifications by reference and should be reviewed in full before placing any order. 19 121219

X7R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 0101* 0201 0402 0603 0805 1206 Soldering Reflow Only Reflow Only Reflow/Wave Reflow/Wave Reflow/Wave Reflow/Wave Packaging Paper/Embossed All Paper All Paper All Paper Paper/Embossed Paper/Embossed mm 0.40 ± 0.02 0.60 ± 0.09 1.00 ± 0.10 1.60 ± 0.15 2.01 ± 0.20 3.20 ± 0.20 (L) Length (in.) (0.016 ± 0.0008) (0.024 ± 0.004) (0.040 ± 0.004) (0.063 ± 0.006) (0.079 ± 0.008) (0.126 ± 0.008) mm 0.20 ± 0.02 0.30 ± 0.09 0.50 ± 0.10 0.81 ± 0.15 1.25 ± 0.20 1.60 ± 0.20 W) Width (in.) (0.008 ± 0.0008) (0.011 ± 0.004) (0.020 ± 0.004) (0.032 ± 0.006) (0.049 ± 0.008) (0.063 ± 0.008) mm 0.10± 0.04 0.15 ± 0.05 0.25 ± 0.15 0.35 ± 0.15 0.50 ± 0.25 0.50 ± 0.25 (t) Terminal (in.) (0.004 ± 0.0016) (0.006 ± 0.002) (0.010 ± 0.006) (0.014 ± 0.006) (0.020 ± 0.010) (0.020 ± 0.010) WVDC 16 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 100 200 250 6.3 10 16 25 50 100 200 250 6.3 10 16 25 50 100 200 250 500 Cap 100 101 B A A A A A C C C G G G (pF) 150 151 B A A A A A C C C G G G 220 221 B A A A A A C C C G G G E E E E E E E 330 331 B A A A A A C C C G G G J J J J J J K 470 471 B A A A A A C C C G G G J J J J J J K 680 681 B A A A A C C C G G G J J J J J J K 1000 102 B A A A A C C C C G G G G J J J J J J J J K 1500 152 B A A A A C C C C G G J G J J J J J J J J J J J J J J M 2200 222 B A A A A C C C C G G J G J J J J J J J J J J J J J J M 3300 332 A A A A C C C C G G J G J J J J J J J J J J J J J J M 4700 472 A A A A C C C C G G J G J J J J J J J J J J J J J J M 6800 682 A A A A C C C C G G J G J J J J J J J J J J J J J J P Cap 0.01 103 A A A A C C C C G G G J G J J J J J J J J J J J J J J P (μF) 0.015 153 C C C C G G G J J J J J J J N J J J J J M J Q 0.022 223 C C C C G G G J J J J J N N J J J J J M J Q 0.033 333 C C C C G G J J J J J N N N J J J J J M J Q 0.047 473 C C C C G G G J J J J J N N N J J J J J M M 0.068 683 C C C C G G G J J J J J N N J J J J J P M 0.1 104 C C C C G G G G J J J J J N N J J J J P P P 0.15 154 G G G G J J J J N N J J J J Q Q Q 0.22 224 C C C G G J J J J J N N N J J J J Q Q Q 0.33 334 J J J J J N N N N N J J M P Q 0.47 474 C C J J J J J N N N N N M M M P Q 0.68 684 J J J N N N M M 1.0 105 C J J J J J N N N N M M 2.2 225 J J J P P P P** Q Q Q Q Q** 4.7 475 J P P P Q Q Q Z 10 106 P P P Q Q X 22 226 X Q Q 47 476 100 107 WVDC 16 6.3 10 16 25 50 6.3 10 16 25 50 6.3 10 16 25 50 100 200 250 6.3 10 16 25 50 100 200 250 6.3 10 16 25 50 100 200 250 500 SIZE 0101* 0201 0402 0603 0805 1206 Letter A B C E G J K M N P Q X Y Z Max. 0.33 0.22 0.56 0.71 0.90 0.94 1.02 1.27 1.40 1.52 1.78 2.29 2.54 2.79 Thickness (0.013) (0.009) (0.022) (0.028) (0.035) (0.037) (0.040) (0.050) (0.055) (0.060) (0.070) (0.090) (0.100) (0.110) PAPER EMBOSSED NOTE: Contact factory for non-specified capacitance values *EIA 01005 **Contact Factory for Specifications The Important Information/Disclaimer is incorporated in these specifications 20 by reference and should be reviewed in full before placing any order. 110819

X7R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED SIZE 1210 1812 1825 2220 2225 Soldering Reflow Only Reflow Only Reflow Only Reflow Only Reflow Only Packaging Paper/Embossed All Embossed All Embossed All Embossed All Embossed mm 3.30 ± 0.4 4.50 ± 0.30 4.50 ± 0.30 5.70 ± 0.50 5.72 ± 0.25 (L) Length (in.) (0.130± 0.016) (0.177 ± 0.012) (0.177 ± 0.012) (0.224 ± 0.020) (0.225 ± 0.010) mm 2.50 ± 0.30 3.20 ± 0.20 6.40 ± 0.40 5.00 ± 0.40 6.35 ± 0.25 W) Width (in.) (0.098 ± 0.012) (0.126 ± 0.008) (0.252 ± 0.016) (0.197 ± 0.016) (0.250 ± 0.010) mm 0.50 ± 0.25 0.61 ± 0.36 0.61 ± 0.36 0.64 ± 0.39 0.64 ± 0.39 (t) Terminal (in.) (0.020 ± 0.010) (0.024 ± 0.014) (0.024 ± 0.014) (0.025 ± 0.015) (0.025 ± 0.015) WVDC 10 16 25 50 100 200 500 16 25 50 100 200 500 50 100 200 25 50 100 200 500 50 100 200 Cap 100 101 (pF) 150 151 220 221 330 331 470 471 680 681 1000 102 1500 152 J J J J J J M 2200 222 J J J J J J M 3300 332 J J J J J J M 4700 472 J J J J J J M 6800 682 J J J J J J M Cap 0.01 103 J J J J J J M K K K K K M M M X X X X M P P (μF) 0.015 153 J J J J J J P K K K K M M M M X X X X M P P 0.022 223 J J J J J J Q K K K K P M M M X X X X M P P 0.033 333 J J J J J J Q K K K K X M M M X X X X M P P 0.047 473 J J J J J J Q K K K K X M M M X X X X M P P 0.058 683 J J J J J M Q K K K K X M M M X X X X M P P 0.1 104 J J J J J M X K K K K X M M M X X X X M P P 0.15 154 J J J J M Z K K K P Z M M M X X X X M P X 0.22 224 J J J J P Z K K K P Z M M M X X X X M P X 0.33 334 J J J J Q K K M X Z M M X X X X M P X 0.47 474 M M M M Q K K P X Z M M X X X X M P X 0.68 684 M M P X X M M Q M P X X M P X 1.0 105 N N P X Z M M X Z M P X X M P X 1.5 155 N N Z Z Z Z Z Z Q X X M X Z 2.2 225 X X Z Z Z Z Z Z X X M X Z 3.3 335 X X Z Z Z Z Z Z X Z 4.7 475 Z Z Z Z Z Z Z Z Z 10 106 Z Z Z Z Z Z Z 22 226 Z Z Z Z 47 476 Z 100 107 WVDC 10 16 25 50 100 200 500 16 25 50 100 200 500 50 100 200 25 50 100 200 500 50 100 200 SIZE 1210 1812 1825 2220 2225 Letter A B C E G J K M N P Q X Y Z Max. 0.33 0.22 0.56 0.71 0.90 0.94 1.02 1.27 1.40 1.52 1.78 2.29 2.54 2.79 Thickness (0.013) (0.009) (0.022) (0.028) (0.035) (0.037) (0.040) (0.050) (0.055) (0.060) (0.070) (0.090) (0.100) (0.110) PAPER EMBOSSED NOTE: Contact factory for non-specified capacitance values The Important Information/Disclaimer is incorporated in these specifications by reference and should be reviewed in full before placing any order. 21 011320