X5R Dielectric General Specifications GENERAL DESCRIPTION • General Purpose Dielectric for Ceramic Capacitors • EIA Class II Dielectric • Temperature variation of capacitance is within ±15% from -55°C to +85°C • Well suited for decoupling and filtering applications • Available in High Capacitance values (up to 100μF) PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION) 1210 4 D 107 M A T 2 A Size Voltage Dielectric Capacitance Capacitance Failure Terminations Packaging Special (L” x W”) 4 = 4V D = X5R Code (In pF) Tolerance Rate T = Plated Ni 2 = 7” Reel Code 0101** 6 = 6.3V 2 Sig. Digits + K = ±10% A = N/A and Sn 4 = 13” Reel A = Std. 0201 Z = 10V Number of M = ± 20% U = 4mm TR 0402 Y = 16V Zeros (01005) 0603 3 = 25V 0805 D = 35V 1206 5 = 50V 1210 1 = 100V 1812 **EIA 01005 NOTE: Contact factory for availability of Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values. TYPICAL ELECTRICAL CHARACTERISTICS 20 ds) 10,000 Insulation Resistance vs Temperature a 15 ar F e 10 hm- apacitanc -1-500 stance (O 1,000 C si 100 % -15 Re -20 n o ati -60 -40 -20 0 +20 +40 +60 +80 sul 0 n 20 40 60 80 100 120 Temperature °C I Temperature °C The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 25 121818

X5R Dielectric Specifications and Test Methods Parameter/Test X5R Specification Limits Measuring Conditions Operating Temperature Range -55ºC to +85ºC Temperature Cycle Chamber Capacitance Within specified tolerance ≤ 2.5% for ≥ 50V DC rating Freq.: 1.0 kHz ± 10% ≤ 12.5% for 25V, 35V DC rating Voltage: 1.0Vrms ± .2V Dissipation Factor ≤ 12.5% Max. for 16V DC rating and lower For Cap > 10 µF, 0.5Vrms @ 120Hz Contact Factory for DF by PN 10,000MΩ or 500MΩ - µF, Charge device with rated voltage for 120 ± 5 Insulation Resistance whichever is less secs @ room temp/humidity Charge device with 250% of rated voltage for 1-5 Dielectric Strength No breakdown or visual defects seconds, w/charge and discharge current limited to 50 mA (max) Appearance No defects Deflection: 2mm Capacitance Test Time: 30 seconds ≤ ±12% Resistance to Variation Flexure Dissipation Meets Initial Values (As Above) Stresses Factor Insulation ≥ Initial Value x 0.3 Resistance ≥ 95% of each terminal should be covered with Dip device in eutectic solder at 230 ± 5ºC for 5.0 Solderability fresh solder ± 0.5 seconds Appearance No defects, <25% leaching of either end terminal Capacitance ≤ ±7.5% Variation Dissipation Dip device in eutectic solder at 260ºC for Resistance to Meets Initial Values (As Above) Factor 60seconds. Store at room temperature for 24 ± Solder Heat 2hours before measuring electrical properties. Insulation Meets Initial Values (As Above) Resistance Dielectric Meets Initial Values (As Above) Strength Appearance No visual defects Step 1: -55ºC ± 2º 30 ± 3 minutes Capacitance ≤ ±7.5% Step 2: Room Temp ≤ 3 minutes Variation Dissipation Meets Initial Values (As Above) Step 3: +85ºC ± 2º 30 ± 3 minutes Thermal Shock Factor Insulation Meets Initial Values (As Above) Step 4: Room Temp ≤ 3 minutes Resistance Dielectric Repeat for 5 cycles and measure after 24 ± 2 Meets Initial Values (As Above) Strength hours at room temperature Appearance No visual defects Charge device with 1.5X rated voltage in test Capacitance ≤ ±12.5% chamber set at 85ºC ± 2ºC for 1000 hours Variation (+48, -0). Dissipation ≤ Initial Value x 2.0 (See Above) Factor Note: Contact factory for *optional specification Load Life part numbers that are tested at < 1.5X rated Insulation ≥ Initial Value x 0.3 (See Above) voltage. Resistance Dielectric Remove from test chamber and stabilize at room Strength Meets Initial Values (As Above) temperature for 24 ± 2 hours Appearance No visual defects Capacitance ≤ ±12.5% Store in a test chamber set at 85ºC ± 2ºC/ 85% ± Variation 5% relative humidity for 1000 hours (+48, -0) with Dissipation rated voltage applied. Load ≤ Initial Value x 2.0 (See Above) Factor Humidity Remove from chamber and stabilize at room Insulation ≥ Initial Value x 0.3 (See Above) temperature and humidity for Resistance 24 ± 2 hours before measuring. Dielectric Meets Initial Values (As Above) Strength The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 26 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042418

X5R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED Case Size 0101* 0201 0402 0603 0805 Soldering Reflow Only Reflow Only Reflow/Wave Reflow/Wfeve Reflow/Wfeve Packaging Paper/Embossed All Paper All Paper All Paper Paper/Embossed mm 0.40 ± 0.02 0.60 ± 0.09 1.00 ± 0.20 1.60 ± 0.15 2.01 ± 0.20 (L) Length (in.) (0.016 ± 0.0008) (0.024 ± 0.004) (0.040 ± 0.008) (0.063 ± 0.006) (0.079 ± 0.008) mm 0.20 ± 0.02 0.30 ± 0.09 0.50 ± 0.20 0.81 ± 0.15 1.25 ± 0.20 W) Width (in.) (0.008 ± 0.0008) (0.011 ± 0.004) (0.020 ± 0.008) (0.032 ± 0.006) (0.049 ± 0.008) mm 0.10 ± 0.04 0.15 ± 0.05 0.25 ± 0.15 0.35 ± 0.15 0.50 ± 0.25 (t) Terminal (in.) (0.004 ± 0.0016) (0.006 ± 0.002) (0.010 ± 0.006) (0.014 ± 0.006) (0.020 ± 0.010) Voltage: 6.3 10 4 6.3 10 16 25 4 6.3 10 16 25 50 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 Cap (pF) 100 101 B A 150 151 B A 220 221 B A C 330 331 B A C 470 471 B A C 680 681 B A C 1000 102 B A A C 1500 152 B B A A C 2200 222 B B A A A C 3300 332 B B A A A C 4700 472 B B A A A C G 6800 682 B B A A A C G Cap (μF) 0.01 103 B B A A A C G G G 0.015 150 B C G G G 0.022 223 B A A A A C C G G G N 0.033 333 B C G G G N 0.047 473 B A A A A C C G G G N 0.068 689 B C G G N 0.1 104 B A A A A C C C C G G G N N N 0.15 154 G N N 0.22 224 B A A A C C C C C G G N N N 0.33 334 G G N 0.47 474 B A A C C C C C E G J N P P 0.68 684 G N 1.0 105 A A C C C C C C C G G G G J G G N N P P 1.5 155 2.2 225 C C C C C C C C G G J J J K K N N P P P 3.3 335 J J J N N 4.7 475 E E E E J J J G G N P J N N P P 10 106 E E E K J J J P P P P P 22 226 E E K K K P P P P P 47 476 K K P P P 100 107 Voltage: 6.3 10 4 6.3 10 16 25 4 6.3 10 16 25 50 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 Case Size 0101* 0201 0402 0603 0805 Letter A B C E G J K M N P Q X Y Z Max. 0.33 0.22 0.56 0.71 0.90 0.94 1.02 1.27 1.40 1.52 1.78 2.29 2.54 2.79 Thickness (0.013) (0.009) (0.022) (0.028) (0.035) (0.037) (0.040) (0.050) (0.055) (0.060) (0.070) (0.090) (0.100) (0.110) PAPER EMBOSSED PAPER and EMBOSSED available for 01005 NOTE: Contact factory for non-specified capacitance values *EIA 01005 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 27 092220

X5R Dielectric Capacitance Range PREFERRED SIZES ARE SHADED Case Size 1206 1210 1812 Soldering Reflow/Wave Reflow Only Reflow Only Packaging Paper/Embossed Paper/Embossed All Embossed mm 3.20 ± 0.40 3.20 ± 0.40 4.50 ± 0.30 (L) Length (in.) (0.126 ± 0.016) (0.126 ± 0.016) (0.177 ± 0.012) mm 1.60 ± 0.30 2.50 ± 0.30 3.20 ± 0.20 W) Width (in.) (0.063 ± 0.012) (0.098 ± 0.012) (0.126 ± 0.008) mm 0.50 ± 0.25 0.50 ± 0.25 0.61 ± 0.36 (t) Terminal (in.) (0.020 ± 0.010) (0.020 ± 0.010) (0.024 ± 0.014) Voltage: 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 Cap (pF) 100 101 150 151 220 221 330 331 470 471 680 681 1000 102 1500 152 2200 222 3300 332 4700 472 6800 682 Cap (μF) 0.01 103 0.015 150 0.022 223 0.033 333 0.047 473 0.068 689 0.1 104 0.15 154 0.22 224 0.33 334 0.47 474 Q Q X X 0.68 684 1.0 105 Q Q Q X X X 1.5 155 2.2 225 Q Q Q Q Q X Z Z 3.3 335 Q Q 4.7 475 X X X X X X X Z Z Z Z Z 10 106 X X X X X X X X X Z Z Z Z Z 22 226 X X X X X Z Z Z Z Z Z Z Z Z 47 476 X X X X Z Z Z Z Z 100 107 X X Z Z Voltage: 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 Case Size 1206 1210 1812 Letter A B C E G J K M N P Q X Y Z Max. 0.33 0.22 0.56 0.71 0.90 0.94 1.02 1.27 1.40 1.52 1.78 2.29 2.54 2.79 Thickness (0.013) (0.009) (0.022) (0.028) (0.035) (0.037) (0.040) (0.050) (0.055) (0.060) (0.070) (0.090) (0.100) (0.110) PAPER EMBOSSED PAPER and EMBOSSED available for 01005 NOTE: Contact factory for non-specified capacitance values *EIA 01005 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 28 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 021020