ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 1

ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 43 ARINC 404 DPX DPXA - Single Shell DPX DPXA connectors are one-piece shell miniature rack/panel connectors. The construction offers high strength and maximum utilization of insert area for contact arrangements accommodating up to 106 contacts. Shells are keystone-shaped for polar- ization. Operating temperature for the DPXA is -54.2˚C to +125˚C (-67˚F to +257˚F). DPXB - Polarized ARINC Shell DPXB connectors are DPXA connectors with an ARINC B shelf. Additional polarization is provided H by three hexagonal polarizing posts. DPXA-34 DPXB-33 DPX2 - Two Gang DPX Series R DPX2 connectors are the original two-gang versions a of the DPX, and are made of the same materials and c accommodate the same contact arrangements. k Keystone shaped shells accommodate two DPX a inserts with up to 212 contacts. The DPX2 has n three polarizing posts with 99 polarizing positions. d DPX2 - A - ARINC A Shell P DPX2-A connectors are DPX2 connectors with an a ARINC A shell. This shell type has the receptacle DPX2-34B DPX2-33B n flange placed .344 (8.74) from the front of the e engaging portion of the shell, and short aluminum DPX2-B - ARINC B Shell receptacle flange placed .060 (1.52) from the front l alloy polarizing posts permit polarization before DPX2-B connectors supersede the DPX2-A and of the engaging portion of the shell, and polarizing contacts engage. have an ARINC B Shell. This Shell type has the posts permit polarization before the shells engage. DPX3 - Three Gang DPX Series DPX3 connectors are three-gang versions of the DPX, made of the same materials, and accommo- date the same contact arrangements. The three- gang version can therefore accommodate up to a total of 318 in the keystone shaped shells, with three polarizing posts that are capable of providing up to 99 polarizing positions. DPX4 - Four Gang DPX Series DPX4 connectors are four gang versions of the DPX, made of the same materials, and can accommodate four separate arrangements that can total up to 424 contacts. The DPX4 has three polarizing posts DPX3-34 DPX4-33 with 99 polarizing positions. DPX*MA - LITTLE CAESAR' Contact Assembly DPX*ME - Environmental with LITTLE CAESAR DPX*MA connectors are DPX connectors with the Contact Assembly LITTLE CAESAR contact assembly for rear in- DPX*ME connectors are DPXMA connectors with sertion, release, and extraction of crimp type con- environmental interfacial and grommet seals, and tacts. Insertion requires no tool; extraction requires olive drab shell finish. an expendable plastic tool. A hard dielectric, closed-entry socket insert has lead-in chamfers for positive mating of contacts. Contacts are crimpable with the M22501 tool. Performance and Material Specifications (DPXA/DPXB/DPX*MA/DPX*ME) DPXA/DPXB/DPX2 DPX*MA/DPX2*MA/ME Specifications Material Aluminum alloy Aluminum alloy QQ- A-591/A380 Shell Finish Cadmium plate with yellow chromate Cadmium plate with yellow chromate for MA: olive drab for ME QQ-P-416 Insulator Material Melamine or Phenolic Diallyl phthalate or epoxy MIL-M-14 Material Copper alloy Copper alloy QQ-C-533 Contacts Finish Gold Gold MIL-G-45204 Termination Solder Pot Crimp N/A Material Die Cast Die cast Polarizing Posts Finish Cadmium Cadmium QQ-P-416 Material Steel Steel QQS-630-637 Screws & Lockwashers Finish Cadmium Plate Cadmium plate QQ-P-416 Seals Material N/A Silicone N/A www.ittcannon.com H-43

ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 44 ARINC 404 DPX How to Order DPXA/DPXB DPX A 32C2 - 34 P - 1 DPX B R MA - 67 - 33 S - 00 01 - F0 SERIES PREFIX SHELL STYLE RoHS CLASS H CONTACT ARRANGEMENT SHELL TYPE CONTACT TYPE l e MODIFICATION n POLARIZING POSITION a P LESS CONTACTS* d SERIES PREFIX CONTACT ARRANGEMENT DPX - ITT designation 2 thru 106 (see pages H-50 to H-54) n a SHELL STYLE SHELL TYPE A - Single shell 33 for plug; 34 for receptacle k c B - Polarized ARINC shell CONTACT TYPE a RoHS version P for pin: S for socket R R - RoHS compatible CLASS MODIFICATION No designator - Solder type DPXA - See page H-66 to H-69 MA - Crimp type with LITTLE CAESAR contact DPXB - See pages H-66 to H-69. assembly POLARIZING POSTION ME - Environmental crimp type MB - Wire seperator For DPXB shell style only MK - Mounting springs DPX2 DPX 2 57 P - 57 P - 33 B - 00 01 DPX 2 MA 57 P - 57 P - 33 A - 03 01 DPX 2 R MA 57 P - 57 P - 34 B - 02 01 - F0 SERIES PREFIX TWO GANG SHELL RoHS CLASS CONTACT ARRANGEMENT (Side A) CONTACT TYPE CONTACT ARRANGEMENT (Side B) CONTACT TYPE SHELL TYPE SHELL STYLE MODIFICATION NUMBER POLARZING POSITION LESS CONTACTS* SERIES PREFIX CONTACT ARRANGEMENT SHELL STYLE DPX - ITT Cannon designation 2 thru 106 (see pages H-50 to H-54 No designator - original two-gang DPX A - ARINC A shell SHELL CONTACT TYPE B - ARINC B shell 2 - Two gang P for pin; S for socket RoHS SHELL TYPE MODIFICATION R - RoHS compatible See pages H-66 to H-69. 33 for plug; 34 for receptacle CLASS POLARIZING POSITION No designator - Solder type See pages H-70 MA - Crimp type with LITTLE CAESAR contact assembly ME - Environmental crimp type Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-44

ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 45 ARINC 404 DPX How to Order DPX3/DPX4 DPX 3 ME - 57 P - 57 P - 57 P - 34 - 00 01 DPX 4 ME - 57 P - 57 P - 57 P - 57 P - 34 - 00 01 SERIES PREFIX SHELL CLASS CONTACT ARRANGEMENT (Side A) CONTACT TYPE H CONTACT ARRANGEMENT (Side B) CONTACT TYPE R CONTACT ARRANGEMENT SERIES PREFIX a (Side C) c DPX - ITT designation CONTACT TYPE k SHELL CONTACT ARRANGEMENT a 3 - Three gang 4 - Four gang (Side 0) n CLASS CONTACT TYPE d MA - Crimp type contacts in LITTLE CAESAR SHELL TYPE contact assembly P ME - Environment- resistant, crimp type contacts MODIFICATION NUMBER a *CONTACT ARRANGEMENT POLARIZING POSITION n See pages H-50 to H-54 for applicable arrangements. **CONTACT TYPE SHELL TYPE e Please specify each arrangement number as in- P for pin; S for socket. Designation follows each 33 for plug; 34 for receptacle l dicated in ordering nomenclature for 3 or 4 gang if arrangement as ordered for 3 or 4 gang versions. MODIFICATION See pages H-66 to H-69. not listed below. ROHS Finish Zinc Plate per ASTM-B-633 with Trivalent Chromate Coating POLARIZING POSITION See pages H-70 DPXMA/ME DPXMA/DPXME - 0PX - 3 Shell Layouts Insert - Used in shell position as noted MA: W8 32W4 57 67 A106 Layout ME: AW8 A32W4 57 67 A106 *E24 A,B,C *F122 A,B C G122 B A,C *E142 C A,B *A166 C A,B 171 A,B,C 201 A,B,C *C205 C A B B240 A,C B C240 A,B C *D244 C A,B A279 C A,B A318 A,B,C *Applicable to "ME" only. Consult factory for similar layouts application to "MA." NOTE: For pictorial views of above layouts see pages 52-56. DPXMA/DPXME - 0PX - 4 Shell Layouts Insert - Used in shell position as noted MA: W8 26 32W4 57 67 A106 None Layout ME: AW8 26 A32W4 57 67 A106 None 145 A,B,C D *B148 C,D B A B150 A,B A,C C,D *181 B A C D *B189 C,D B A *A198 C,D A,B,C A,B 268 A,B,C,D *E287 D B A,C *220 B C,D A *A233 A B,C,D 279 A C,D B *F287 B A C,D *E326 B A,C,D A346 C,D A,B B346 A,B C,D 385 A B,C,D A424 A,B,C,D Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-45

ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 46 ARINC 404 DPX Single Gang DPXA-33 All tolerances +_ .015(0.38) unless otherwise noted. 1.614 +_.006 (41.00 +_ 0.15) .120 (3.05)DIA. 1.060 4MTG. HOLES (26.92) 2.312 (58.73) 1.125 .750 +_.005 .995 +_.005 H (28.58) (19.05 +_ 0.13) (25.27 +_ 0.13) .125 (3.18) l 2.062 +_.005 .125 R.TYP e (52.38 +_ 0.13) (3.18) n .750 (19.05) a DPXA-34 P d 1.750 +_.016 (44.45 +_ 0.41) 1.157 (29.39) n .120 (3.05)DIA. a 2.312 (58.73) 4MTG. HOLES .782 (19.86) k c 1.125 +_.015 .750 +_.005 a (28.58 +_ 0.38) (19.05 +_ 0.13) R .187 R.TYP 2.062 +_.005 .125 R.TYP .125 (3.18) (4.75) (52.38 +_ 0.13) (3.18) .344 (8.74) DPXA-33 ARINC Shell TWO HOLES 2.000 (50.80) .120 (3.05) DIA. FOR MAX.GROMMET 1.541 (39.14) MAX. MTG. REF. ONLY MTG.DATUM EXTENSION 2.320 (58.93) MAX. WITH COAX .954 (24.23) .766 (19.46) .720 +_.005 (18.29 +_ 0.13) 2.047 (52.00) 1.720 +_.005 NOTE: DPXME AND (43.69 +_ 0.13) DPXNE GROMMETS ARE APPLICABLE TO ALL SHELL SIZES POLARIZING POST .120 (3.05) & C' SUNK .718 +_.005 82 X.230 (5.84) DIA. (18.24 +_ 0.13) 4 HOLES .125 (3.18) 1.437 (36.50) REF. DPXA-34 ARINC Shell TWO HOLES .120 (3.05) 1.750 +_.005 TYP. MAX.GROMMET 1.634 (41.50) MAX. DIA. FOR MTG. (44.45 +_ 0.13) EXTENSION 2.413 (61.29) MAX. WITH COAX REF. ONLY MTG.DATUM .120 (3.05) DIA. 1.061 4 MTG. HOLES (26.95) .720 +_.005 (18.29 +_ 0.13) 2.012 (51.11) 1.405 1.720 +_.005 (35.69) (43.69 +_ 0.13) .060 3 POLARIZING 2.000 (50.80) (1.52) .125 KEYS (3.18) .718 +_.005 (18.24 +_ 0.13) NOTE - ARINC requires that DPXB shells are mounted with the polarizing posts at the top. See pages 71-72 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-46

ca_H1-H116:Layout 1 2/10/11 8:22 AM Page 47 ARINC 404 DPX Two Gang DPX2-33 Shell All tolerance are +_ .015 (0.38) unless otherwise noted. 2.062 +_ .005 (52.38 +_ 0.13) 2.312(58.73) .063 (1.60) .375 TYP. .988 +_ .005 (9.52) A CENTER (25.09 +_ 0.13) POLARIZING POST 3.063 .7(5109 .+_0 5.0 +_0 50 .T1Y3)P. POT TWO (26.14.3982 ++__ .00.1205) (77.80) JUNCTION H POLARIZING SHELL TABS B POSTS SHOWN FOR REF. R .125 (3.18) a 8 HOLES .120 (3.05) DIA. .766 c FOR #4-40 SCREWS MTG. DATUM .188 (4.78) R. TYP. (19.46) k DPX2-34 Shell a n 2.312(58.72) d 1.750 +_ .010 2.062 +_ .005 (44.45 +_ 0.41) .125 (3.18) P (52.38 +_ 0.13) .063 (1.60) a n 1.125 e .375 +_ .005 TYP. A CENTER (28.58) l (9.52 +_ 0.13) POLARIZING POST .750 +_ .005 TYP. (19.05 +_ 0.13) POT TWO (26.14.3983 ++__ .00.1205) (37.70.6830) 2.814 +_ .010 POLARIZING (71.48 +_ 0.41) JUNCTION B POSTS SHELL TABS SHOWN FOR REF. 8 HOLES .120 (3.05) DIA. .344 (8.74) FOR #4-40 SCREWS MTG. DATUM .188 (4.78) R. TYP. 1.016 (25.81) DPX2-33A ARINC A Shell .718 +_ .005 1.437 +_ .005 .766 (19.46) (18.26 +_ 0.13) (36.50 +_ 0.13) .125 (3.18) TOP 3 POLARIZING A 2.783 +_ .005 JUNCTION POSTS (70.69 +_ 0.13) .988 +_ .005 SSHHOEWLLN T FAOBRS .720 +_ .005 (25.10 +_ 0.13) REF (18.20 +_ 0.13) 3.110 TYP. B (78.99) 2.000 .188 (4.78) R. TYP. (50.80) MTG. DATUM .954 +_ .005 (24.23 +_ 0.13) 6 HOLES .120 (3.05) DIA. FOR #4-40 SCREWS DPX2-34A ARINC A Shell 1.015 2.000 (50.80) 1.750 +_ .016 (25.78) .188 (4.78) R. TYP. (44.45 +_ 0.41) .344 (8.74) TOP JUNCTION 3 POLARIZING A 2.783 +_ .005 2.468 +_ .010 SHELL TABS POSTS (70.69 +_ 0.13) (62.69 +_ 0.25) SHOWN FOR REF. .720 +_ .005 TYP. 3.109 (18.20 +_ 0.13) B (78.97) 1.125 (28.58) FLOATING EYLETS .116 (2.95) I.D. FOR #4-40 SCREWS 1.437 +_ .005 MTG. DATUM .125 (3.18) SHOWN FOR REF. (36.50 +_ 0.13) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-47

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 48 ARINC 404 DPX Two Gang - ARINC B Shell DPX2-33B DPX2-34B All tolerances are +_ .015(0.38) unless other wise noted. .8S12H2 O0 X W( 3.2N.03 50F) OD(5RI.A8 R.4 &)E DFC.I'A S. U4 NHKOLES 2F OHRO LMETSG ..1R2E0F(.3O.0N5L)YDIA. (1.796.466) .125 (3.18) 2DR IEHAFO.. OFLOENSRLY .M12T0G (.3.05) (414.7.4550 +_+_ .00.1358) .188 (4.78) R. TYP. .060 (1.52) .125 (3.18) TOP TOP (738.1.1909) A 3 POLARIZING .988 +_.004 (.738.0.1705) A 3 POLARKIZEINYGS POSTS (25.10 +_ 0.10) 2.783 +_.005 (70.69 +_ 0.13) + + (720.7.6893 +_+_ .00.0153) (622.4.6698 +_+_ .00.1358) H B (1.87.2209 +_+_. 000.153) B (1.87.2209 +_+_. 000.153) MTG.DATUM .718 +_.005 .188 (4.78)R. TYP. (2.94.5243) 1.061 (18.24 +_ 0.13) MTG DATUM 4 MTG. HOLES (26.95) l .120 (3.05) DIA. FOR e 1.437R E(3F6.50) 2.000 (1.87.1284 +_+_. 000.153) #4-40 SCREWS n (50.80) 1.437 (32.50) REF a 2.000 (50.80) P d Two Gang - Screw Coupling n a DPX2-33F (Female) DPX2-34M (Male) k 2.312 (58.72) 2.312(58.72) c a .766 (19.46) (522.0.3682 +_+_ .00.0165) 3.063(77.80) 1.016 (25.81) (522.0.3682 +_+_ .00.0165) (37.70.6830) R (.10.6630) (410.6.9142 +_+_ .00.0153) .063 .344 (8.74) (414.7.4550 +_+_ .00.1461) (1.60) (627.6.9776 +_+_ .00.1461) B (621.4.9328 +_+_ .00.0165) (721.8.4184 +_+_ .00.1461) A (621.4.9328 +_+_ .00.1205) (2.59.8089 +_+_. 000.153) COUNPULTING COSCURPELIWNG POT TPPWOOLSOATRSIZING POT POLTAWRIOZING POSTS .750 +_.005 .750 +_.005 A (19.0T5Y +_P .0.13) SFEOER D DPEXT2A-3IL3SM (12.81.2558) B (19.0T5Y +_P .0.13) .125 (3.18) (9.3.5725 +_+_ .00.0153) 8F OHRO L#E4-S4 0.1 S2C0(R3E.0W5)SDIA .125 (3.18) 8F OHRO L#E4.S4 0.1 S2C0 R(3E.0W5S) DIA .188 (4.78) R. TYP .375 +_.005 (9.52 +_ 0.13) .188 (4.78) R. TYP DPX2-34F (Female) DPX2-33M (Male) 2.312 (58.72) 2.312 (58.72) 1.016 (25.81) (522.0.3682 +_+_ .00.0165) 3.063 .766 (19.46) (522.0.3682 +_+_ .00.0165) .344 (8.74) 1.750 +_.016 (77.80) .063 1.612 +_.005 3.063 (77.80) .063 (44.45 +_ 0.14) (1.60) (40.84 +_ 0.13) (1.60) (721.8.4184 +_+_ .00.1461) A (621.4.9328 +_+_ .00.0153) (627.6.9776 +_+_ .00.1461) B (621.4.9328 +_+_ .00.1205) COUPLING COUPLING NUT SCREW POT TPWOLOARIZING POT TPWOLOARIZING POSTS POSTS 1.125 (28.58) B (1.97.50T05 Y +_+_P. 0.00.153) (2.958.089) A (1.97.50T05 Y +_+_P. 0.00.153) .125 (3.18) .375 +_.005 (9.52 +_ 0.13) 375 +_.005 8F OHRO L#E4-S4 0.1 S2C0(R3E.0W5)SDIA .188(4.78) R. TYP. .125(3.18) 8F OHRO L#E4-S4 0.1 S2C0 R(3E.0W5S) DIA 1.88(4.78) R. TYP. (9.52 +_ 0.13) STANDARD SUPPLIED WITH HEX. SLOTTED KNOB Engaging Devices D-0P9X012;- 3e4xMam wpitleh, wDinPgX 2h-a3n4dMle- 0ty9p0e1 (39M.47A.26X52.) DknPoXb2 t-y3p4eM - 0w5i0th1 ;e extxeanmdpelde ,h DexP,X2-34M-0501 (25M.72A.53X60.) 2.032 (51.61) .312 (7.92) HEX. Not availble on DPX2-34B Shells Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-48

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 49 ARINC 404 DPX3/DPX4 Two Gang - ARINC B Shell DPX3-33 DPX3-34 All tolerances are +_ .015(0.38) unless other wise noted. .766 (19.46) (25.00.0800) .125 (3.18) (25.00.0800) (12.60.6915) 1.612 1.750 .060 (1.52) (40.94) (44.45) H 4.354 (110.59) 4.318 R (109.68) a 4.026 3.711 (102.26) 4.026 (94.26) c (102.26) k a MTG. DATUM MTG. DATUM n .988 (25.10 d P a .718 .180 R. TYP. .718 6 MTG HOLES n (18.24) (4.57) (18.24) .120 (3.05) DIA. .125 (3.18) e .282 (7.16) .282 l (7.16) 1.437 1.437 (36.50) (36.50) Four Gang DPX4-33 DPX4-34 .766 (19.46) 3.860 .125 (3.18) 3.860 (98.04) 1.061 (98.04) (26.95) 1.612 3.610 (91.69) .060(1.52) (40.94) 2.468 2.783 (62.69) 3.110 (70.69) 3.075 (78.99) (78.10) 2.783 (70.69) .988 (25.10) (2.933.602) .(148.507 R). TYP. 1.102 M0 T(3G.0 H5O) DLEIAS. (2.933.602) .282 (7.16) .125 (3.18) MTG. DATUM 1.648 .282 (7.16) MTG.DATUM 1.648 (41.88) (41.86) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-49

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 50 ARINC 404 DPX Contact Arrangement Variations Solder Type (Captive Contacts) NOTE: See pages 59-60 for Coaxial/Power Contact Termination Data PIN SOCKET No. of Test Contact Contact Contact Contacts Voltage Contacts No. of Type Contact No. of Type Contact Arr. & Wire size AC (RMS) Arr. No. Contacts Code Numbers Contacts Code Numbers 1000 (1,2)V C2 2 R 1-2 2 R 1-2 C2 C2 2 coax matched C2C 2 AB 1-2 Consult Factory (RG-9/U) impedance C2M Consult Factory 2 AC 1-2 H C7 7 K 1-7 4 F 1,2,4,5 3 G 3,6,7 C7A 7 A 1-7 Same as Pin l e C7B 7 B 1-7 Same as Pin n Same as Socket 7 K 1-7 a C7 C7 7 coax 1000 (1-7)V C7B (Use C7) P C7M 7 C 1-7 Same as Pin d C7X 7 AA 1-7 Same as Pin n C7AA 7 Z 1-7 Same as Pin a k c a 8* 8 8 #12 2000V 8 N 1-8 8 0 1-8 R 10C3 7 L 1-4, 8-10 Same as Pin 10C3* 10C3 7 #20 1(15-040, 3 l 5,6,7 3 coax A10C3 7 L 1-4, 8-10 Same as Pin 8-10)V 3 J 5,6,7 B16C3 13 M 4-16 Same as Pin 3 A 1-3 C16C3 13 M 4-16 Same as Pin 3 B 1-3 1500 G16C3 13 M 4-16 Same as Pin B16C3* B16C3 13 #16 (4-16)V 3 C 1-3 3 coax 1000 J16C3 13 M 4-16 Same as Pin (1-3)V 3 K 1-3 ZE16C3 13 M 4-16 Same as Pin 3 Z 1-3 ZF16C3 13 M 4-16 Same as Pin 3 AA 1-3 17 17 17 #20 2000V 17 17 L 1-17 Same as Pin 2000 (15-23). 23 23 23 #20 1500 23 23 L 1-23 Same as Pin (1-14)V. 22 L 4-25 25C3 22 L 4-25 2 F 1,3 3 K 1-3 1 G 2 F25C3 22 L 4-25 Same as Pin 3 C 1-3 G25C3 22 L 4-25 Same as Pin 1500 3 A 1-3 22 (#20). (4-25)V. 25C3* 25C3 3 coax 1000 J25C3 22 L 4-25 Same as Pin (1-3)V 3 B 1-3 Q25C3 22 L 4-25 Same as Pin 3 Z 1-3 R25C3 22 L 4-25 Same as Pin 3 AA 1-3 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-50

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 51 ARINC 404 DPX Contact Arrangement Variations Solder Type (Captive Contacts) NOTE: See pages 59-60 for Coaxial/Power Contact Termination Data PIN SOCKET No. of Test Contact Contact Contact Contacts Voltage Contact No. of Type Contact No. of Type Contact 6 5 4 3 2 1 Arr. & Wire Size AC (RMS) Arr. No. Contacts Code Numbers Contacts Code Numbers 13 12 11 10 9 8 7 26* 19 18 17 16 15 14 26 26 #16 1500V 26 26 M 1-26 Same as Pin 26 25 24 23 22 21 20 15 L 1,6 14-26 A30C4 11 M 2-5, 7-13 Same as Pin H 6 5 4 3 2 1 4 Z 27-30 13 12 11 10 9 8 7 15 #20. 1500 (2-5 15 L 1,6 14-26 30C4 26252423222120191817161514 30C4 11 #16, & 7-13)V B30C4 11 M 2-5, 7-13 Same as Pin 30 29 28 27 4 coax 1000 (1,6 4 AA 27-30 R & 14-26)V 15 L 1,6 14-26 a C30C4 11 M 2-5, 7-13 Same as Pin c 4 A 27-30 k a 6 2 5 4 1 3 2000 n 32 15 14 13 12 11 10 9 8 7 32 3 #16 (1-6) 32 29 L 1,3,4,7-32 Same as Pin d 23 22 21 20 19 18 17 16 29 #20 1500 3 M 2,5,6 32 31 30 29 28 27 26 25 24 (7-32)V P a n 30 L 1-30 30 L 1-30 e 32C2 2 K A1, A2 2 F A1, A2 l A32C2 30 L 1-30 Same as Pin 2 A A1, A2 6 5 4 3 2 1 32C2* A2301212642210192135112908 219781242218671231275 A1 32C2 320 c #o2a0x (A(1111-,503 A000002)V)V DC3322CC22 332200 CBLL AA1111--,,33 AA0022 SSaammee aass PPiinn M32C2 30 L 1-30 Same as Pin 2 Z A1, A2 N32C2 320 ALA A11-,3 A02 Same as Pin 6 5 4 3 2 1 14 13 12 11 10 9 8 7 40* 23 22 21 20 19 18 17 16 15 40 40 #20 1500V 40 40 L 1-40 Same as Pin 31 30 29 28 27 26 25 24 40 39 38 37 36 35 34 33 32 40C1 319 BL 1A-319 Same as Pin A40C1 39 L 1-39 39 L 1-39 1 K A1 1 F A1 7 6 5 4 3 2 1 40C1* 19 214318213217212116211015209148 A1 40C1 39 #20 (11-53090)V F40C1 319 CL 1A-319 Same as Pin 31 303929382837273626352534 33 32 1 coax (1A010)0V J40C1 319 ZL 1A-319 Same as Pin 39 L 1-39 K40C1 1 AA A1 Same as Pin 39 L 1-39 L40C1 Same as Pin 1 A A1 7 6 5 4 3 2 1 15 14 13 12 11 10 9 8 45* 3255 32442333 32223211 32001299 12881277 1266 45 45 #20 1500V 45 45 L 1-45 Same as Pin 45 44 43 4241 40 39 38 37 36 9 8 7 6 5 4 3 2 1 19 1817 16 15 14 13 12 11 10 57* 38283727362635253424332332223121302029 57 57 #20 1500V 57 57 L 1-57 Same as Pin 47 46 45 44 43 4241 40 39 57 56 55 54 53 52 515049 48 7 6 5 4 3 2 1 17161514 13 12 11109 8 67* 42524942518340257239256138255037429434628335427234426134325031249431148330 67 634 ##1260 1000V 67 634 ML 1-23,-65-65 Same as Pin 6766656463626160 59 58575655 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-51

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 52 ARINC 404 DPX*MA/ME Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series NOTE: See pages 62-65 for Coaxial Contact data See pages 57-58 for Crimp Contact data Contact No. of Contacts Test Voltage Contact No. of Contact Size or Contact 4 3 2 1 Arr. & Wire Size AC (RMS) Arr. No. Contacts Code Letter Numbers 8 8 8 #12 8 8 12 1-8 8 7 6 5 H 4 3 2 1 16 1-4 D8 8 7 6 5 D8 4 #16, 4 #12 D8 4 12 5-8 l e n W8 coax a W8** C8A G P 4 2 1 3 (For MA) C8B F d W8** 6 5 AW8 8 coax 1000V (1-8)V C8C 8 H 1-8 n 8 7 (For ME) C8E R a C8G S k C8H AB c a R 2 3 1 2 B 1,2 10 5 4 10 2 #8, 8 #20 1500V 10 8 20 3-10 10 9 8 7 6 3 2 1 8 16 1-3, 5, 6 5 A10 7 8 4 A10 8 #16, 2 #4 1500V A10 6, 8-10 10 9 2 4 4, 7 7 20 H.D. 10W3 3 2 5 4 1 3 coax 10W3** 7 6 10W3** 7 #32 0c,o Hax.D., (1-41, 580-100)V A10C3 73 20A HC.D. 1-45, -87-10 10 9 8 7 20 H.D. B10C3 3 AC 3 2 1 1500 (4-16) SOCKET 1000 (1-3)V B16W3** 16 915814 713 612511 140 BO1N6LWY3 13 #16, 3 coax so(Nckoet ta sviadiea bolnely B16W3 133 c1o6ax 41--136 in ME series) 22 20 25W3 3 coax 5 3 2 1 4 1500 (4-25)V, 25A3 22 20 25W3 916 15 14813 712 11 106 25W3 22 (#20) 3 coax (N10o0t 0a v(a1i-l3a)bVle 232 2C0 41--235 25 24 23 22 21 20 19 18 17 in ME series) 25B3 3 D 22 20 25D3 3 B 6 5 4 3 2 1 13 12 11 10 9 8 7 26 19 18 17 16 15 14 26 26 #16 1500V 26 26 16 1-26 26 25 24 23 22 21 20 **Crimp rear release coaxial contacts. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-52

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 53 ARINC 404 DPX*MA/ME Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series NOTE: See pages 62-65 for Coaxial Contact data See pages 57-58 for Crimp Contact data Contact No. of Contacts Test Voltage Contact No. of Contact Size or Contact Arr. & Wire Size AC (RMS) Arr. No. Contacts Code Letter Numbers 32W2 30 20 2 coax 30 20 32A2 2 B 6 12 5 11 4 10 9 3 8 2 7 1 32W2** 32B2 320 2A0 H A2 16 15 14 13 A1 (For MA) 1500 (1-30), 30 20 1-30 32W2 20 19 18 17 A32W2 30 #20, 2 coax 1000 (A1,A2)V 32C2 2 D A1,A2 24 23 22 21 30 29 28 27 26 25 (For ME) D32C2 30 20 R 2 J a 32F2 30 20 c 2 P k 30 20 32G2 2 C a n d 4 coax 32W4 24 20 H.D. P 4 16 a 4 S n 32C4 24 20 H. D. e 4 16 l 4 H B32C4 24 20 H. D. 32W4** 4 16 32W4 (FAo3r2 MWA4 ) 42 #41 #62, 04 Hc.oDa.x 11050000 ( 2(19--2382)),V C32C4 2444 20 1HR6. D. 1-722,95 1--32028-2 2 29 (For ME) 8, 9, 23, 24 4 G D32C4 24 20 H. D. 4 16 4 AA E32C4 24 20 H. D. 4 16 4 AB H32C4 24 20 H. D. 4 16 36W7 222519 122937A1 071 7 9A 3 8 16A7 6 1 56 1A42 51 3A 541 2 3 A12 1A11 4122 862 222804 36W7** 7 2c9o a#x2 2(S ize 5) 1000 For coax contacts see page F-34 6 5 4 3 2 1 14 13 12 11 10 9 8 7 40 23 22 21 20 19 18 17 16 15 40 40 #20 1500V 40 40 20 1-40 31 30 29 28 27 26 25 24 40 39 38 37 36 35 34 33 32 39 20 40W1 1 coax 7 6 5 4 3 2 1 40W1** 19 13 181 2 171 1 161 0 15 9 14 8 A1 (For MA) 39 #20, 1500 (1-39) 40B1 319 2B0 1-39 40W1 31 30 3294 29 2338 2 8 223 72 7 2316 2 6 2305 253 4 33 32 (FAo4r0 WME1 ) 1 coax 1000 (A1)V 40F1 319 2P0 A1 39 20 F40C1 1 J 7 6 5 4 3 2 1 15 14 13 12 11 10 9 8 45 25 24 23 22 21 20 19 18 17 16 45 45 #20 1500V 45 45 20 1-45 35 34 33 32 31 30 29 28 27 26 45 44 43 42 41 40 39 38 37 36 **Crimp rear release coaxial contacts. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-53

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 54 ARINC 404 DPX*MA/ME Contact Arrangement Variations, Crimp Type - DPX*MA/ME Series NOTE: See pages 62-65 for Coaxial Contact data See pages 57-58 for Crimp Contact data Contact No. of Contacts Test Voltage Contact No. of Contact Size or Contact 9 8 7 6 5 4 3 2 1 19 18 17 16 15 14 13 12 11 10 Arr. & Wire Size AC (RMS) Arr. No. Contacts Code Letter Numbers 28 27 26 25 24 23 22 21 20 57 38 37 36 35 34 33 32 31 30 29 57 57 #20 1500V 57 57 20 1-57 47 46 45 44 43 42 41 40 39 57 56 55 54 53 52 51 50 49 48 H 7 6 5 4 3 2 1 67 412752 4941 1625 8314 505 2 2731 94 25 613 85 20513 374 2943 64 28313 2524 273 44 26311 3 142 5031 2041 493 9141 383 08 67 64 #32 #01 H6 .D. 1105600-006 7((1)3V,- 5 2), 67 634 20 1H6. D. 1-32, ,4 6, -56 7 67 66 65 64 63 62 61 60 59 58 57 56 55 l e n a 12 1 25 13 P 39 26 d A106† 675692 465073 A106† 106 #22 1000V A106 106 22 1-106 93 80 n 106 94 a **Crimp rear release coaxial contacts. k †A106 arrangements have the POS-ALINE connector design. See below. c NOTE: Engaging force of each layout arrangement shall not exceed 45 lbs. maximum. a R Positive Contact Alignment Design For high density A106 contact arrangement PLUG INSULATOR RECEPTACLE INSULATOR PIN SOCKET In the POS-ALIGN connector construction the entire pin contact is recessed in an individual cavity in the plug insulator while the sturdy socket members are exposed and extend from the connector receptacle face. There is a lead-in chamfer that guides the socket contact into the pin cavity assuring proper contact alignment during mating and protecting the pin contact from damage and wear. Rear inserstion, release and extraction of crimp snap-in contacts The ITT Cannon LITTLE CAESAR contact assembly permits contacts to be inserted, released, and extracted from the rear of the connector with a simply, expendable plastic tool. The contact is inserted from the rear of the connector thru a cylindrical clip in the insulator until indented tines of the clip snap securely behind the contact shoulder. The contact is released as the plastic tool is inserted into the rear of the connector, expanding the tines beyond the contact shoulder, permitting contact extraction. The simplified contact design has a single holding shoulder and no undercuts for improved bend resistance. Other features of the LITTLE CAESAR contact assembly include: hard dielectric socket face with lead-in chamfers for positive mating of contacts; good contact stability with minimum clearance between the contact and the insulator cavity wall; plus a “closed-down” design of the insulator’s hard dielectric around each pin contact. This LITTLE CAESAR contact assembly was selected by the National Aerospace Standards Committee as the system to be used in a major industry connector specification, for vital programs demanding great operational reliability. The LITTLE CAESAR contact assembly is currently available in the BKA, DPX*MA, DPK, DPDMA, and DPAMA Series. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-54

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 55 ARINC 404 DPX*MA/ME Contact and Termination Tooling Data - Commercial Crimp Contacts The crimp contacts are shipped with the connector, be purchased separately. The insertion/extraction not installed. Additional contacts may be ordered tools listed are plastic type. Consult factory for using the part numbers listed below. All tools must more durable metal tools. Part Number Crimp Insertion/ Tool Locator Extraction Layout Usage Contact DPX MA DPX ME Wire Part Part Tool DPX DPX Size Type Commercial Commercial 1 Accom. Number Number (Part No.) ME MA Pin 030-1975-007 030-1975-005 CIT-DPXMA-22 H 2222 Socket 031-1113-007 031-1113-008 22,24,26 M22520/2-01 M22520/2-23 M81969/1-01 A106 A106 10, 10, Pin 030-9081-000 030-2040-000 A32W2, 25W2, M22520/2-01 M22520/2-02 R 2020 20,22,24 MS-3191-1 Std. Locator (274C-7IE0T0-12-0000) A4400W,1, 324W0,2 a Socket 031-9134-001 031-1046-002 MS-3191-3 SMt2d2. 5L2o0c/a2t-o0r1 45,57 4405W,517, ck Pin 030-9081-003 030-1892-002 CIET-20 10W3 10W3 a M22520/2-01 M22520/2-08 2020HD 20,22,24 MS-3191-1 Standard M81969/1-02 A32W4, 32W4, n Socket 031-9134-004 031-1047-002 (980-0004-805) 67 67 d Pin 030-9083-001 030-1893-002 D8, D8, P A10, A10, M22520/1-01 M22520/1-02 CIET-16 a 1616 16,18,20 MS-3191-1 Std. Locator (274-7002-000) 26, B16W3, n A32W4, 26, Socket 031-9206-004 031-9206-021 67 32W4, e 67 l 1212 Pin 030-1909-001 030-2045-000 12,14 M22520/1-01 M22520/1-11 CIET-12 D8 8, Socket 031-1059-001 031-1059-002 (274-7003-000) D8 Pin 030-1908-001 030-1908-001 CBT-600* CCH8-1 Head CET-8-2 0808 Socket 031-1154-000 031-1154-000 8 CBT600B* CCHP-8-6 (323-7004-000) 10 10 Pin 030-2049-000 030-2049-000 CBT-600* CCH4-1 Head CET-4-8 0406 6 A10 A10 Socket 031-1151-000 031-1151-000 CBT600B* CCHP-4-8 (323-7008-000) * Requires air line pressure of 80 to 100 psi. These DPXME contacts are being superseded in favor of military DPXNE/NA contacts, this applies to all existing DPXME connector assemblies, except for size 20 contacts. Electrical Data Max. Potential Drop Insulation (0.D.) Test Current Max. Current for (Millivolts) Contact Wire Limits Inch (mm) per MIL-C-39029 Tests (Amps) at 25 C Size Size Max. Table VI (Mil-C-39029) per MIL-C-39029 4 6 .310 (7.87) 60 60 33 8 8 .250 (6.35) 46 46 39 12 23 23 63 12 .135 (3.43) 14 17 17 60 16 13 13 68 16 18 .103 (2.62) - - - 20 7.5 - 75 20 7.5 7.5 83 20 22 .071 (1.80) - - - 24 3 3.0 68 22 5 5.0 110 22 24 .054 (1.37) - - - 26 2 2.0 80 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-55

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 56 ARINC 404 DPX*MA/ME Description of Modification Codes for Special Connector Insert Assemblies Class Series DPX Insert Type Class Series DPX Insert Type Class Series DPX Insert Type None DPXA Two (2) pieces, solder pot. D* - (MA) LITTLE CAESAR assembly, DPX2CA-/ A side: (MAS) LITTLE CAESAR DPXB crimp pot, (Cat. A) assembly, solder pot (32W2S) MA DPXAMA LITTLE CAESAR rear release contact E* - Metal plates. DPX2AC- - B side; Standard 2 Piece, solder DPXBMA retention assembly, crimp pot. F* - Rear release, crimp (MB type only). (Reverse pot (57S). MAS - LITTLE CAESAR assembly, solder pot, DPX2- - Standard 2 pieces, solder pot, CA) Ex: DPX2CA-32W2S57S-33-0001 MB - LITTLE CAESAR rear release contact both sides, DPX2AF - A side: Standard solder pot. B side: Rear release crimp with separator. retention assembly, crimp pot, with Ex: DPX2-57S57S-33-0001 H Ex: DPX2AF-13S26S-33B-0001 separator. DPX2MA - Standard LITTLE CAESAR asembly, MS - Ring-Loc, solder pot, crimp pot both sides Ring-loc coax. DPX2BA - A side: Ring-Loc solder pot (40W1S). B Side: 2 Piece, Solder Pot (57S). ME - Environmental, connector. EX:DPX2MA-57S57S-33-0001 Ex: DPX2BA-40W1S57S-33-0001 el A* - Two (2) pieces, solder pot (Standard DPX2MAS - LbIoTthT LsEid eCsA REiSnAg-RL oacs sceomaxb.l y, soler po, DPX2DA - A side: (MA) LITTLE CAESAR n 2 pieces insert). EX: DPX2MAS-57S57S-33-001 assembly, Crimp (67S). B* - Ring-Loc, solder pot. (See MS) B Side: 2 Piece, solder pot (57S). Pa C* - (SMoAldSe)r LpIoTtT. LE CAESAR assembly, DPX2MS- - RpEiXinn: go D-nLPloyX ca2, nMsdoS l4d-04eC0r W1p oP1tS.i nL4 aa0ynWod1u sSt o2-c35k3Ce-3t0. 001 DPX2EB - EA xs:i dDeP: XM3eDtaAl- p6l7aSte5s7 Sfo-r3 g3r-o0u0n0d1i ng d (Coaxes). *NOTE: When any two of these letters are used in combination, the n inserts ("A" and "B") side have the style contacts indicated B side: Ring-Loc, solder pot. Ex: DPX2EB-C1P40W1P-34B-0001 a (see table opposite for examples). k c Contact and Termination Tooling Data a R DPXMA (LIF) Crimp Contacts Contact Size Insertion/ and Part Numbers Crimp Tooling Extraction Tooling Wire Size Part Number Tool P/N Locator P/N Se- ITT Cannon MIL ITT lec MIL ITT MIL Insul Strip Size Pin Socket Spec Cannon tor# Spec Cannon Spec Insertion Extraction Ins./Ext. AWG Dia. Max. Length 222 030-2 259-000 03 1-1287-000 M/222-0512 0 99-55-8040 01 334 M22-22532 0 99-50-1050 02 M/811-0916 9 C(I0T7-D02PM5Xe6Mt-a0Al 0-0202)- 1 C(0E7T0-D3M1Pe7Xt-aM0l 0A0-02)2 (98M0-e0t0a0l 4T-i8p0 4) 222642 (.10.3574) (3.1.3300//2.1.1504 ) 2020HD 03 0-2273-000 031-1 302-000 M/222-05120 99-55-804001 67 M/222-05820 99-56-004001 M/811-09269 - - (98M0-e0t0a0l 4T-i8p05) 2220 (.10.7810) (.41.6274//.31.4773) 1616 03 0-2280-000 031-1 303-000 M12-205120 99-55-805001 456 M/212-05220 99-57-306001 M/811-09369 - (32C3P-E7lTa0-s01t16ic--0900) (98M0-e0t0a0l 4T-i8p06) 211086 (.21.0632) (.62.7806//.52.3804) 1212 03 0-2286-000 031-1 308-000 M12-20512 0 995-5-08050 1 78 M/212-1512 0 99-50-2070 02 M/1841-90649 - (32C3P-E7lTa0-s01t22ic--0 40 0) (274CP-7IEla0Ts0-t31ic-20 00) 1142 (.31.4335) (.62.7806//.52.3804 ) N Type Thermocouple NICROSIL-NISIL DPXMA Thermocouple Contacts K Type Thermocouple CHROMEL / ALUMEL J Type Thermocouple IRON-CONSTANTAN Contact Size Insertion/ and Part Numbers Crimp Tooling Extraction Tooling Wire Size Part Number Tool P/N Locator P/N Se- ITT Cannon MIL ITT lec MIL ITT MIL Insul Strip Size Pin Socket Spec Cannon tor# Spec Cannon Spec Insertion Extraction Ins./Ext. AWG Dia. Max. Length 2222 Alumel 030-1975-009 031-1113-009 M22520 995-0001 33 M22520 995-0002 M81969 CIT-DPMXeMtaAl -22-1 CET-DMPeXtaMl A-22 (980-0004-804) 2264 .054 .130/110 2222 /2-01 -584 4 /2-23 -015 /1-01 (070256-0000) (070317-0000) Metal Tip 22 (1.37) (3.30/2.54) Chromel 030-1975-010 031-1113-010 Ch2r0oHmDel 030-2163-000 031-1243-000 M/222-05120 99-55-804001 67 M/222-05820 99-56-004001 M/811-09269 - - (98M0-e0t0a0l 4T-i8p05) 2220 (.10.7810) (.41.6274//.31.4773) Al2u0mHeDl 030-2162-000 031-1242-000 M/222-05120 99-55-804001 67 M/222-05820 99-56-004001 M/811-09269 - - (98M0-e0t0a0l 4T-i8p05) 2220 (.10.7810) (.41.6274//.31.4773) Ch1r6o1m6el 030-1898-000 031-1035-000 M12-205120 99-55-805001 456 M/212-05220 99-57-306001 M/811-09369 - (32C3P-E7lTa0-s01t16ic--0900) (98M0-e0t0a0l 4T-i8p06) 211086 (.21.0632) (.62.7806//.52.3804) Al1u6m1e6l 030-1897-000 031-1034-000 M12-205120 99-55-805001 456 M/212-05220 99-57-306001 M/811-09369 - (32C3P-E7lTa0-s01t16ic--0900) (98M0-e0t0a0l 4T-i8p06) 211086 (.21.0632) (.62.7806//.52.3804) Con1s6t1a6ntan 030-1905-000 031-1061-000 M12-205120 99-55-805001 456 M/212-05220 99-57-306001 M/811-09369 - (32C3P-E7lTa0-s01t16ic--0900) (98M0-e0t0a0l 4T-i8p06) 211086 (.21.0632) (.62.7806//.52.3804) Con1s6t1a6ntan 030-1904-000 031-1060-000 M12-205120 99-55-805001 456 M/212-05220 99-57-306001 M/811-09369 - (32C3P-E7lTa0-s01t16ic--0900) (98M0-e0t0a0l 4T-i8p06) 211086 (.21.0632) (.62.7806//.52.3804) See DPDMA contact for standard size 20 thermocouple contacts Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-56

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 57 ARINC 404 DPX Solder Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.) Contact Rear Extension type Part Number Cable Layout from insulator code Pin Socket Accommodation Accommodation .209 (5.31) .067 (1.70) DIA. C7A, B16C3, RG-187/U A 249-0672-000 249-0671-000 RG-188/U G25C3, C30C4, A32C2, L40C1 H .209 (5.31) .106 C7B, J25C3, (2.69) DIA. B 249-0702-000 249-0703-000 RRGG--118905//UU C16C430, CC132C2, R a c k .209 (5.31) .125 (3.18) RG-55/U C7H, G16C3, a DIA. C 249-0749-000 249-0750-000 RG-58/U F25C3, D32C2, n RG-223/U F40C1 d P a .209 (5.31) n C7J, H16C3, .149 (3.78) DIA. D - 249-0518-000 RG-59/U H25C3, F32C2, e E30C4, E40C1 l .579 .250 (14.71) (6.35) DIA. I 249-0365-000 249-0353-000 RG-7/U 10C3 .735 .127 (18.67) (3.23) DIA. RG-55/U J 249-0257-000 249-0268-000 RG-58/U A10C3 RG-223/U .616 .085 (15.65) (2.16) DIA. K 202425943---000501812350---000000000 202425943---000501912150---000000000 RRGG--118878//UU J1265CCC733,,, CA3724DC0C2,1, A40C1 pin only, use C40C1 for socket .117 (2.97) L 330-0144-000 330-0145-000 7.5 amp #20 wire See Note 1 .181 (4.60) M 030-0056-010 031-0016-008 13 amp #16 wire See Note 2 .237 (6.02) N 030-0017-015 - 23 amp 8 4.58 (11.63) O - 031-0059-008 #12 wire 8 * These coaxial contacts are supplied with the connector. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-57

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 58 ARINC 404 DPX Solder Coaxial/Power Contact Termination Data (Retained by Captive Insulator Assy.) Contact Rear Extension type Part Number Cable Layout from insulator code Pin Socket Accommodation Accommodation 1.250 APP. (31.75) .440 (11.18) DIA R 249-1521-000 249-1522-000 RG-9/U, RG-214/U C2 H .206 (5.23) DIA. l C7AA, ZE16C3 e RG-58/U n Z 249-1624-000 249-1598-000 with Capitve QM2352CC32,, AJ4300CC14 Contact a .768 .140 P (19.51) (3.56) DIA. d n a .364 (9.25) .093 (2.36) DIA. k RG-196/U C7X, ZF16C3, c AA 249-1599-000 249-1622-000 with Captive R25C3, B30C4, a Contact N32C2, K40C1 .040 (1.02) DIA. R .750 APPROX. (19.05) .224 (5.69) DIA. AB 249-1554-000 249-1822-000 RG-58/U C2C 1.250 APPROX. (31.75) RG-9/U .438 (11.13) DIA. AC Consult Factory 249-5027-001 RG-214/U C2M NOTES: 1. Code L-10C3, A10C3,17, 23, 25C3, E25C3, F25C3, G25C3. H25C3,J25C3, Q25C3, R125C3, 30C4, A30C4, C30C4, D30C4, E30C4, 32, 32C2, A32C2, C32C2, 032C2, F32C2, M32C2, N32C2 Q32C2, 40, 40C1, B40C1, D40C1, E40C1, F40C1, H40C1, J40C1, K40C1, L40C1, 45, 57, 67, 2. Code M-B16C3, C16C3, G16C3, H16C3, M16C3, ZE16C3, ZF16C3, 26, 30C4, 32, 67 Suggested Cable Trim Dimensions Inches Millimeters B Code Letter A B C A B C A A .166/.146 .358/.318 .14 4.22/3.71 9.08/8.08 3.55 C B .166/.146 .358/.318 .14 4.22/3.71 9.08/8.08 3.55 C .166/.146 .358/.318 .14 4.22/3.71 9.08/8.08 3.55 INNER CONDUCTOR D .166/.146 .358/.318 .14 4.22/3.71 9.08/8.08 3.55 DIELECTRIC E .166/.146 .358/.318 .14 4.22/3.71 9.08/8.08 3.55 BRAID I .166/.146 .39 .166/.146 4.22/3.71 9.91 4.21/3.71 J .166/.146 .55 .166/.146 4.22/3.71 13.97 4.21/3.71 JACKET K .198/.178 .488/.428 .25 5.03/4.52 11.38/10.87 6.35 Z .08 .41 .23 2.03 10.41 5.84 AA .11 .23 .195/.175 2.79 5.84 4.95/4.45 AB .238/.198 .233/.193 .447/.427 6.04/5.03 5.92/4.90 11.35/10.89 AC .345/.281 .516/.484 .359/.296 8.71/7.14 13.1/12.3 9.12/7.52 R .238/.198 .233/.193 .582/.542 6.05/5.03 5.92/4.90 14.8/13.8 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-58

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 59 ARINC 404 DPX Solder Coaxial Cable Assembly ITT Cannon recommends resistance soldering for all should be pre-tinned. Bushing, endbells, and junc- factory for types not shown. The mechanical steps solder contacts, particularly for RF cable where tion shells (where applicabe) must be slipped over in wiring coaxials described below. excessive heat will damage the dielectric. Wires wire bundles before soldering is started. Consult For Codes A, B, C, D, and E INNER CONTACT 1. Cut cable evenly. Trim to dimensions as shown INNER CONDUCTOR on page 60. Care should be taken not to injure COAXIAL SHELL OUTER CONDUCTOR H the conductor or dielectric. JACKET 2. Remove inner contact from coaxial assembly and solder it to inner conductor of cable. R 3. Push inner contact back into coaxial assembly. a 4. Pull outer conductor over coaxial shell, and c solder. k 5. Apply shrink sleeving after assembly. a n d For Codes I and J P 1. Cut cable evenly. Trim to dimensions as shown a 2. on page 60. Care should be taken not to injure n the conductor or dielectric. e 2. Comb braid, tin conductor and remove flux. l 3. Remove solder pot cover. Insert cable and 3. solder conductor to contact. The dielectric should butt against contact solder pot. 4. Replace solder pot cover and solder braid to 4. ferrule. 5. Apply shrink sleeving after assembly. For Codes K CAP SPACER 1. Cut cable evenly. Trim to dimensions as shown on page 60. Care should be taken not to injure CAP STRIP INNER CONDUCTOR OUTER the conductor or dielectric. CONDUCTOR 2. Unscrew cap and remove spacer and inner INNER CONTACT contact from coaxial assembly. 3. Push cable through center of cap and spacer. 4. Solder inner. contact to inner conductor of cable. 5. Push inner contact back into coaxial shell as- sembly and attach cap. 6. Separate outer conductor of cables into two pigtails 180˚ apart. 7. Attach on pigtail to each end of cap strip and solder. 8. Apply shrink sleeving after assembly. For Codes Z and AA OUTER SLEEVE 1. Cut cable evenly. Trim to dimensions as shown CONTACT on page 60. Care should be taken not to injure REAR INSULATOR SHELL FRONT INSULATOR the conductor or dielectric. ASSY 2. Solder inner conductor to coaxial contact through side slot in coaxial with outer sleeve pushed back on cable. 3. Pull sleeve forward over braid and solder through holes in sleeve. 4. Solder sleeve to coaxial body. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-59

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 60 ARINC 404 DPX*MA Crimp Coaxial Contacts NOTES:1. The "X" dimension is take from the rear of the shell. 2. Codes G and S are inactive for new design. Use codes AD and AE. 3. Code AA is designed for installations that have limited space in the terminal area. Use code AG for standard installations. *P for pin; S for socket. Codes A, B, C, D, E, H, P, R Y DIA. X Z DIA. H Arr. Code Cable Contact X Y Z Extraction Used In Letter Accommodation Part Number* Retention Max. Dia. Dia. Crimp Tool Tool l *RG-59/U P-249-1397-000 .158 (4.01) .275 (6.53) e A RG-62/U S-249-1398-000 Ring Loc .760 (19.30) .148 (3.76) .247 (6.27) n a B *RG-58/U P-249-1399-000 Ring Loc .760 (19.30) .128 (3.25) .211 (5.36) CA58073 P B16W3 S-249-1400-000 .118 (3.00) .201 (5.10) d 2352WW32 C *RRGG--119850//UU PS--224499--11440012--000000 Ring Loc .760 (19.30) ..111288 ((33..0205)) ..116566 ((43..2926)) (038C8E6T9--C04004) n 40W1 a D RRGG--117749//UU,, RRGG--118878//UU PS--224499--11440034--000000 Ring Loc .760 (19.30) ..007622 ((11..8537)) ..112111 ((23..8027)) CCT-HX4-524 ck E RG-178/U P-249-1405-000 Ring Loc .760 (19.30) .072 (1.83) .091 (2.31) CCT-408M a RG-196/U S-249-1406-000 .062 (1.57) .081 (2.06) R 3W2W84 H RRGG--117749//UU,, RRGG--118878//UU PS--224499--11663334--000000 CLAITETSLAER .592 (15.04) ..007622 ((11..8537)) ..112111 ((23..8027)) CCCTC-TH-X4048-5M24 (323C-7E0T1-C1-8000) B16W3 2352WW32 P *RbGra-5id8 /oUv ewr itjahc nkyelton S-249-1608-000 Ring Loc .760 (19.30) ..111288 ((33..0205)) ..223155 ((55..9476)) CAC5ri8m0p73 (038C8E6T9--C04004) 40W1 3W2W84 R *RRGG--119768//UU PS--224499--11667701--000000 CLAITETSLAER .592 (15.04) ..007622 ((11..8537)) ..009811 ((22..3016)) CCCTC-TH-X4048-5M24 (323C-7E0T1-C1-8000) *IMPORTANT: These coaxials can only be used in the DPX*MAS or DPX*MB Connector Series. Codes F, S, T X Y DIA. Z DIA. F RRGG--5692//UU PS--224499--11447741--000000 CLAITETSLAER .775 (19.68) ..115488 ((43..0716)) ..223288 ((65..0749)) CCCTA-H58X037-1356 (323C-7E0T1-C1-8000) 3W2W84 S RRGG--15452/U/U PS--224499--11995589--000000 CLAITETSLAER .592 (15.04) ..113200 ((33..3005)) ..223288 ((65..0749)) CA58073 CET-C8 RG-59/U P-249-1960-000 LITTLE .158 (4.01) .238 (6.04) CCT-HX3-156 (323-7011-000) T RG-62/U S-249-1961-000 CAESAR .592 (15.04) .148 (3.76) .228 (5.79) Codes G X Z DIA. Y DIA. 3W2W84 G RG-58/U PS--224499--11663312--000000 CLAITETSLAER .500 (12.70) ..113200 ((33..3005)) ..220111 ((55..3160)) CCCTC-TH-X4048-5M24 (323C-7E0T1-C1-8000) Codes J X Z DIA. Y DIA. W16W3 25W3 P-249-1388-000 .130 (3.30) .273 (6.93) CET-C4 32W2 J RG-58/U S-249-1390-000 Ring Loc 798 (20.27) .120 (3.05) .263 (6.68) Solder (038869-0004) 40W1 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-60

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 61 ARINC 404 DPX*MA Crimp Coaxial Contacts CODE K X Z DIA. Y DIA. Arr. Code Cable Contact X Y Z Extraction Used In Letter Accommodation Part Number* Retention Max. Dia. Dia. Crimp Tool Tool B16W3 25W3 RG-178/U P-249-1384-000 .045 (1.14) .098 (2.49) CET-C4 H 32W2 K RG-196/U S-249-1413-000 Ring Loc .906 (23.01) .035 (0.89) .088 (2.24) Solder (038869-0004) 40W1 CODE L X R a c k .500 (12.70) a Y DIA. n Z DIA. d B16W3 P 2352WW32 L RRGG--117986//UU PS--224499--11348164--000000 Ring Loc .518 (13.16) ..004355 ((10..1849)) ..009888 ((22..4294)) Solder (038C8E6T9--C04004) an 40W1 e l CODE U X Y DIA. Z DIA. W8 U RRGG--117749//UU,, RRGG--118878//UU S-249-1883-000 CLAITETSLAER .425 (10.80) ..006599 ((11..7550)) ..111077 ((22..9772)) CCT-C10 (038C8E6T9--C08004) CODE V, AC X Y DIA. Z DIA. P-249-1956-000 LITTLE .260 (6.60) .356 (9.04) V RG-115/U S-249-1957-000 CAESAR .800 (20.32) .254 (6.45) .349 (8.86) Buchanan CET 4-8 10W3 AC RG-58/U LITTLE .800 (20.32) .205 (5.21) .356 (9.04) 612991 (323-7008-000) S-249-1977-000 CAESAR .199 (5.05) .349 (8.86) Z DIA. CODE AA, AB, AD, AE, AF, AG X Y DIA. RG-178/U P-249-1968-000 LITTLE .088 (2.24) .126 (3.20) AA .260 (6.60) T & B #WT400 RG-196/U CAESAR .084 (2.13) .122 (3.10) AB RG-180/U P-249-1982-000 RG-195/U S-249-1983-000 P-249-2017-000 AD RG-58/U W8 S-249-2018-001 CET-C8 32W4 AE RG-142/U P-249-2019-001 LITTLE .575 (14.60) .114 (2.90) .168 (4.27) Daniels (323-7011-000) S-249-2020-001 CAESAR .104 (2.64) .158 (4.01) HX4-210 RG-174/U, RG-187/U P-249-1633-004 AF RG-179/U, RG-188/U S-249-1634-003 RG-178/U P-249-2061-000 AG RG-196/U S-249-2062-001 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-61

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 62 ARINC 404 DPX*MA Crimp DPX*MA/ME Coaxial Contact Data (for environmental requirements) 6 5 4 3 2 1 Components/Accessories 12 11 10 9 8 7 A2 A1 16 15 14 13 20 19 18 17 NOTE:The A32W2 & A40W1 (Ring Type Retention); AW8 & A32W4 (LITTLE CAESAR Renention) Coaxial Contact arrangements have been 24 23 22 21 redesigned to provide ease of insertion/removal of the coaxial contacts. Sealing is accomplished with the addiction of sealing sleeves provided with the coaxial contact assembly. 30 29 28 27 26 25 32W2 (MA Version) A32W2 (ME Version) RING TYPE RETENTION (A32W2 & A40W1 CONTACT ARRANGEMENTS) H 7 6 5 4 3 2 1 Part Number* Cable Accommodation Ins. Dia. 'A' Trim Crimp 13 12 11 10 9 8 Without Seal (MA) Sealed (ME) Seal 1 Seal 2 Size/Max. Dim. Tool 19 18 17 16 15 14 A1 P-249-1397-001 P-249-1397-002 X RG59B, RG62A .249 (6.32) .435 (11.05) CA58073 24 23 22 21 20 el S-249-1398-003 S-249-1398-002 .415 (10.54) 31 30 29 28 27 26 25 n P-249-1399-001 P-249-1399-002 RG58B X .200 (5.08) .460 (11.68) CA58073 39 38 37 36 35 34 33 32 a S-249-1400-003 S-249-1400-002 .440 (11.18) 40W1 (MA Version) P P-249-1401-001 P-249-1401-002 RG195 RG180B .158 (4.01)] .460 (11.68) CA58073 A40W1 (ME Version) d S-249-1402-003 S-249-1402-002 .440 (11.18) n P-249-1403-001 P-249-1403-002 RG179B RG174, RG179B, .113 (2.87) .460 (11.68) CCT-406M Cable Trim Dimensions a S-249-1404-003 S-249-1404-002 RG316 .440 (11.18) .420 (10.67) k P-249-1405-001 P-249-1405-002 RG179B, RG196 X .083 (2.11) .480 (12.19) CCT-406M .400 (10.16) .330 (8.38) c S-249-1406-003 S-249-1406-002 .460 (11.68) .310 (7.86) a R *P for pin, S for socket A †Unsealed accomodates both Seal 1 & Seal 2 Cables. ††For use with connectors supplied less grommet ( Code 29**, etc.) WITHOUT SEAL Coaxial Contact Assembly Recommendations (For Codes A, B, C, D, E, J, K, L and P) (For Codes A, B, C, D, E, J, K, L and P) 1. Center contact, rear insulator, crimp ring, support bushing and seal sleeve are packaged separately and shipped with the coaxial assembly. 2. Use impact extraction tool no. CET-C4 (038869-0004). An insertion tool is not required. (See Item 4). SOCKET 3. Cable Assembly Instructions Step 1- If applicable, determine which portion of seal sleeve should be used. If seal 2 is used, cut off seal 1 portion PIN Step 2 - In sequence, place seal sleeve, support bushing and crimp ring over cable jacket. Step 3 - Trim cable per illustration. SEALED Step 4 - Place rear insulator over dielectric. Step 5 - Solder innerconductor to center contact. SEAL 2 Step 6 - Insert soldered cable firmly into coaxial with shielding over coaxial shell. SEAL 1 BUSHING Step 7 - Pull crimp ring forward until stopped and crimped. Step 8 - Insert coaxial assembly into connector until engaged. Push support bushing into grommet until shoulder rest on tublular extension. Then pull seal sleeve forward until it is snug against grommet. SEAL SOCKET 4. To extract coaxial, push back seal sleeve and support bushing. Then push out coaxial from engaging end with CET-C4 (038869-0004) impact tool. 5. When crimping with CA58073 crimp tool, care should be taken to avoid flaring the front end of the crimp ring. Place Crimp jaw so that the second tooth of the indentors is over the end of the crimp ring. 6. To facilitate extraction of contacts and avoid splaying the length of free cable adjacent to the rear BUSHING surface of the connector should not be less then 2.000 (50.80). PIN Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-62

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 63 ARINC 404 DPX*MA Crimp DPX*MA/ME Coaxial Contact Data (for environmental requirements) Components/Accessories 9 7 15 10 1 8 4 2 1 3 Cable Trim Dimensions With Seal 24 22 16 23 CU 249-0000-047 & -045 28 25 6 5 32 31 30 29 8 7 Without Seal CU 249-0000-044 & -046 32W4** (MA Version) W8** (MA Version) A32W4 (ME Version) AW8 (ME Version) .610 (15.49) LITTLE CAESAR® CONTACT RETENTION (A32W4 & AW8 CONTACT ARRANGEMENTS) .590 (14.99) H A Part Number* Cable Accommodation† Ins. Dia. 'A' Trim Without Seal†† (MA) Sealed (ME) Seal 1 Seal 2 Size/Max. Dim. P-249-1633-004 P-249-1633-003 RG179 RG174, RG316, .111 (2.82) .350 (8.89) R S-249-1634-003 S-249-1634-002 RG179B .330 (8.38) a { c P-249-1982-000 P-249-1982-001 RG180B RG195 .158 (8.89) .260 (6.60) k S-249-1983-000 S-249-1983-001 .250 (6.35) P-249-2017-001 P-249-2017-000 { RG58C X .196(4.98) .260 (6.60) SOCKET a n S-249-2018-001 S-249-2018-000 .250 (6.35) { d P-249-2019-001 P-249-2019-000 RG142B X .196 (4.98) .260 (6.60) S-249-2020-001 S-249-2020-000 .250 (6.35) P P-249-2061-001 P-249-2061-000 { RG178B X .075 (1.90) .260 (6.60) PIN a n S-249-2062-001 S-249-2062-000 .250 (6.35) e *P for Pin. S for Socket l Unsealed accommodates both Seal 1 & Seal 2 cables. CU DWGS with seal 249-0000-044 and 249-0000-045 For use with connector supplied less grommet (Code-29**, etc.). CU DWGS without seal 249-0000-047 and 249-0000-046 Coaxial Contact Assembly and Extraction Recommendations WITHOUT SEAL SEALED 1. Use Crimp Tool No. DIE Y211 (995-0002-249), Tool M22520 / 5-01 (995- SEAL 2 0001-761). BUSHING SEAL 1 2. Use extraction tool No. CET-C8. An insertion tool is not required. (See Note 5). 3. Center contact, rear insulator, crimp ring, support bushing (not applicable to SOCKET RG58/RG142 coaxials), seal sleeve, front insulator, shell and ferrule are SEAL SOCKET shipped unassembled in a common container. 4. Cable Assembly Instructions: Step 1 - If applicable, determine which portion of seal sleeve should be used. If seal 2 is used, cut off seal 1 portion. Step 2 - In sequence, place seal sleeve, support bushing and crimp ring PIN over cable jacket. BUSHING PIN Step 3 - Trim cable per illustration. Step 4 - Comb out braid and flare out ends to permit entry of ferrule. Step 5 - Complete termination per illustration. (See below) 5. To extract: coaxial, push back seal sleeve and support bushing. Slip cable into ex- 6. To facilitate extraction of contacts and avoid splaying, the length of free cable traction tool. Push tool into insert until it contacts coaxial retaining shoulder. Grip adjacent to the rear surface of the connector should not be less than 2.000 both cable and tool with one hand and pull coaxial rearward out of insert cavity. (50.80). .035 (0.89) .030 (0.76) FRONT INSULATOR FERRULE BRAID .350 CRIMP AREA A. Carefully push inner conductor through rear insulator. (8.89) B. While holding rear insulator firmly against ferrule, trim conductor to .156 APPROX. COAXIAL SHELL (3.96)/.146 (3.71) dimension. A. Place front insulator over contact and then push assembly into coaxial shell. C. Place contact over conductor and solder. B. Place parts in jaw of crimp tool. Locate jaws at start of chamfer on crimp .156 (3.96) sleeve. Press sleeve firmly into coaxial shell and crimp. .146 (3.71) C. After assembled coaxial is inserted into connector, push support bushing into grommet until shoulder rests on tubular extension. Then pull sealing sleeve forward until it is snug on grommet. CONTACT REAR INSULATOR A. Push ferrule under braid as far as it will go. Trim off braid extending beyond shoulder of ferrule, if necessary. B. While holding ferrule in place pull crimp sleeve forward over braid until it is tight against shoulder an ferrule. Pull firmly against face of ferrule to make sure it is up tight. C. Trim dielectric to the .035 (0.89)/.030 (0.76) dimension. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-63

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 64 ARINC 404 DPX*MA Crimp Coaxial Cable Assembly Recommendations LITTLE CAESAR Contact Assembly Data For Codes F, S and T 1. Strip and trim cable as shown on page 60. 2. Solder inner conductor to coaxial contact with crimp ring over braid and rear insulator over inner conductor. 3. Insert cable into coaxial with shell under braid. Crimp ring with Cannon crimp tool CA58073. H For Codes G, H and R 1. Strip and trim cable as shown on page 60. 2. Solder inner connector to coaxial contact with crimp ring pushed back on cable. l 3. Insert cable into coaxial and pull ring forward over braid. Crimp ring with Cannon crimp tool e CA58073-0001 or CCT-408M. After crimping, crimp ring must not exceed .252 (6.40) diameter. n a P For Codes U 1. Strip and trim cable as shown on page 60. d n 2. Slide crimp ring over braid and jacket of cable. a 3. Unbraid exposed portion of braid and fold braid wires backward over outside of crimp ring. k 4. Insert prepared wire into right angle fitting of shell assembly. Conductor should be aligned in slot of the c center contact. Crimp with Cannon tool CCT/C10. a 5. Solder center conductor of cable to contact. Insert cap and solder in place. R For Codes AA JACKET .250 (6.35) FERRULE .230 (5.84) 1 . Slip ferrule over cable jacket. Trim outer jacket. Comb out braid as shown. Retrim braid. 2. Bend up combed out braid at right angles to cable. Slide ferrule up to bend and fold braid back against DIELECTRIC ferrule. 3. Slide rear insulator over dielectric as shown. Press insulator firmly against folded back braid and trim .034 DIA. dielectric flush with insulator. Then cut inner conductor to length shown. REAR INSULATOR (0.86) .156 (3.96) 4. Place contact over conductor. Press contact and insulator firmly against braid and solder contact to .136 (3.45) conductor. CONTACT 5. Push cable assembly into shell, pressing against rear of ferrule and crimp area shown with T. & B. #WT-400 Crimp Tool while making sure parts do not move out of place. SHELL CRIMP AREA .198 (5.03) For Codes AC FERRULE .680 (17.27) JACKET .660 (16.76) 1 . Trim jacket to .680 (17.27)/.660 (16.76) dimension. Then slide ferrule over braid until it stops against jacket, and comb out exposed portion of braid. REAR INSULATOR 2. Fold combed braid over ferrule as shown. Then trim dielectric to .070 (1.78)/.060 (1.52) dimension and slide rear insulator over dielectric until it presses against braid. .070 (1.78) 3. Press insulator against braid and trim inner conductor to .247 (6.27)/.237 (6.02) dimension. Then place .060 (1.52) contact over conductor and crimp with MS3191-3 (do not use MS3191-1). Press parts firmly against locator during crimping operation. CONTACT 4. Place front insulator over contact. Push parts into coaxia! shell. While holding parts firmly against stop .247 (6.27) .237 (6.02) FRONT shoulder in coaxial shell, place jaw of crimp tool at back end of shell and crimp. Use Buchanan crimp COAXIAL SHELL INSULATOR tool #612991 (.343 [8.71) across hex]. .400 APPROX. (10-16) .070 (1.78) MAX. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-64

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 65 ARINC 404 DPX*MA Crimp Coaxial Cable Assembly Recommendations (Continued) For Code V FERRULE 1. Trim cable to dimensions shown below. SOLDER ALL AROUND A. Push ferrule under braid as far as it will go and press braid down tightly around ferrule. B. Solder ends of braid to ferrule by applying a small amount of solder. Avoid excess solder as it would cause braid to swell up. 0.75 MAX. C. Remove any solder exceeding the .349 (8.86) max. diameter. (1.90) .349 DIA. MAX D. Check the .075 (1.90) max. dielectric extension, retrim if necessary. (8.86) FRONT INSULATOR 3. A. Place rear insulator over dielectric and conductor into contact. H B. Solder contact to conductor through access hole. C. Remove excess solder from outside of contact. 4. A. Place front insulator over contact. .400 APPROX. B. Push parts into coaxial shell. (10.16) R a C. While holding parts firmly against stop shoulder in coaxial shell, place jaw of crimp tool at back end c of shell and crimp, use Buchanan crimp tool #612991 [.343 (8.71) across hex]. k a For Codes AB, AD, AE, AF and AG n Setp 1 - Trim cable as shown. .610 (15.49) d .590 (14.99) Step 2 - Flare out ends of braid to permit entry of ferrule. .260 (6.60) P Step 3 - Complete termination per instructions as shown below. .250 (6.35) a a. Push ferrule under braid as far as it will go. Trim off braid extending beyond shoulder of ferrul, if n e necessary. l b. While holding ferrule in place pull crimp sleeve forward over braid until it is tight against shoulder on Crimp Sleeve ferrule. Push firmly against face of ferrule to make sure it is up tight. .035 (0.89) .030 (0.76) c. Trim dielectric to the .035 (0.89)/ .030 (0.76) dimension. d. Carefully push inner conductor through rear insulator. e. While holding rear insulator firmly against ferrule, trim conductor to .156 (3.96)/.146 (3.71) FERRULE dimension. .156 (3.96) .146 (3.71) f. Place contact over conductor and solder. g. Place front insulator over contact and then push assembly into coaxial shell. CONTACT h. Place parts in jaw of crimp tool. Locate jaws at start of chamfer on crimp sleeve. Press REAR INSULATOR Sleeve firmly into coaxial shell and crimp. Use Daniels crimp tool HX4-210. .350 APPROX CRIMP AREA FRONT INSULATOR (8.89) COAXIAL SHELL Cable Trim Dimensions Code Inches Millimeters Letter A B C A B C A A .420/.400 .432/.415 .330/.310 .10.67/10.16 11.05/10.54 8.38/7.87 B B, C, D & P .420/.400 .460/.440 .330/.310 10.67/10.16 11.68/11.18 8.38/7.87 C E .420/.400 .480/.460 .330/.310 10.67/10.16 12.19/11.68 8.38/7.87 F .785/.745 .275/.255 .228/.208 19.94/18.92 6.98/6.48 5.79/5.28 G .490/.470 .275/.255 .156/.136 12.45/11.94 6.98/6.48 3.96/3.45 INNER CONDUCTOR H & R .581/.561 .345/.325 .156/.136 14.76/14.25 8.76/8.26 3.96/3.45 DIELECTRIC J .326/.306 .250/.230 .088/.068 8.28/7.77 6.35/5.84 2.24/1.73 BRAID K .410/.390 .290/.270 .088/.068 10.41/9.91 7.37/6.86 2.24/1.73 JACKET L .385/.365 .244/.224 .074/.064 9.78/9.27 6.20/5.69 1.88/1.63 S .678/.658 .275/.255 .156/.136 17.22/16.71 6.98/6.48 3.96/3.45 U .940/.920 .760/.740 .080/.060 23.88/23.37 19.30/18.80 2.03/1.52 V .550/.540 .415/.405 .250/.240 13.97/13.72 10.54/10.29 6.35/6.10 T .598/.578 .300/.280 .228/.208 15.19/14.68 7.62/7.11 5.79/5.28 AA, AC See page 60 for dimensions AB, AD, AE, AF, AG See page 60 for dimensions Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-65

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 66 ARINC 404 DPX Modifications Codes DPXA Modifications Codes - 4. Mounting holes .120 (3.05) dia. c'sink 100˚ to .225 (5.72) dia. - 5. 4-40 clinch nuts. - 6. Removable insert retainer plate. - 7. Mounting holes .120 (3.05) dia. c'sink 82 to .230 (5.84) dia. -12. Mounting holes .132 (3.35)/.125 (3.18). -16. A106 insert with separator. -17. With grommet and mounting holes .120 (3.05) dia. countersunk 100˚ to .225 (5.72) dia. H -70. Standard mounting with (LIF) contacts. -77. Same as -7 except with low insertion force (LIF) contacts (for LIF contact data). l e DPXB and DPX2/3/4 Modification Codes n Some of the modification numbers used in the DPX only certain types. The following chart gives the type in which they may be used (-33 is for plug a lines apply to all types and some are applicable for modification number, the description, and the shell shells, -34 is for receptacle shells). P Modification Applicable Series Definition d n - 00** DPX2-33 and 34 Standard construction, mounting holes .120 (3.05) dia. DPX2-33A and with tabs for junction shells. a DPX2-33F and 34F DPX2-33M and 34M k c - 00 DPX2-34A Standard construction - six floating eyelets a and tabs for junction shells, R - 00 DPX2-33B Standard construction, mounting holes .120 (3.05) dia. DPXB-33 countersunk 82˚ to .230 (5.84) dia. - no tabs. DESCRIBES STANDARD CONNECTOR HOUSING DPX3-33 1 DPX4-33 DPX2-34B - 00 DPXB-34 Standard construction, mounting holes 120 (3.05) dia. - no tabs. 1 DPX3-34 MODIFICATION 00 DPX4-34 DPX2-33 and 34 - 01 DPX2-33A Standard construction and with standard junction shells. DPX2-34A DPX2-33F and 34F #4-40 CLINCH NUTS DPX2-33M-34M - 01 DPX2-34B/33B With four #4-40 clinch nuts in mounting holes. DPXB-34 - 01 DPX3-34 1 With six #4-40 clinch nuts in mounting holes. MODIFICATION 01 DPX4-34 - 01 1 With ten #440 clinch nuts in mounting holes. - 02 DPX2-33 and 34 Standard construction and with 90˚ junction shells. DPX2-33A DPX2-34A DPX2-33F and 34F #4-40 THREAD DPX2-33M and 34M (2 TABS PER RETAINING DPX2-33B and 34B Standard construction and with tabs for attaching junction shells. PLATE) - 02 DPXB-33 and 34 DPX3-33 and 34 DPX4-33 and 34 1 - 02 DPXBME-33 and 34 Standard construction and with tabs for attaching junction shells. DPX2ME-33 and 34 MODIFICATION 02 DPX3ME-33 and 34 2 ATTACHING TABS DPX4ME-33 and 34 ALTERNATE STYLE MOUNTING HOLES - 03 DPX2-33 and 34 Mounting holes .120 (3.05) dia. countersunk 100˚ to .230(5.84) dia. .120 (3.05) DIA. DPX2-33A C'SUNK 100 TO DPX2-33F and 34F .230 (5.84) DIA. DPX2-33M and 34M DPXB-33 and 34 1 DPX3-33 and 34 DPX4-33 and 34 MODIFICATION 03 1 Applicable for all MA, ME, NA & NE Series Connectors. 1 Applicable to NE Series also. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-66

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 67 ARINC 404 DPX Modifications Codes Modfication Applicable Series Definition MOUNTING HOLES - 04** DPX2-33B .120 (3.05) dia. mounting notes countersunk 100˚ to .230 (5.84) dia. .120 (3.05) DIA. DPXB-33 and tabs for attaching junction shells. C'SUNK 100 TO DPX3-33 1 .230 (5.84) DIA. DPX4-33 #4-40 THREAD ATTACHING TABS (2 PER RETAINING H PLATE) MODIFICATION 04 ALTERNATE STYLE - 08 R MOUNTING HOLES DPX2-33 and 34 Mounting holes .137 (3.48) dia. countersunk 82˚ to .230 (5.84) dia. .137 (3.48) DIA. DPX2-33F and 34F a C'SUNK 82 TO c .230 (5.84) DIA. k a n d MODIFICATION 08 P - 12 DPX2-34B With mounting slots .208 (5.28) wide. a MOUNTING DPXB-34 SLOTS (4) n .208 (5.28) e l MODIFICATION 12 - 13 DPX2-34B With mounting slots .237 (6.02) wide. MOUNTING DPXB-34 SLOTS (4) .237 (6.02) MODIFICATION 13 - 14 DPX2-33B With straight junction shelf. (Not available on DPX4) DPXB-33 (SEE PAGE 62 FOR JUNCTION DPX2-34B SHELL CONFIGURATIONS DPXB-34 1 DPX3-33 DPX3-34 #4-40 CLINCH NUTS - 17 DPX2-33B With four #4-40 clinch nuts in mounting holes DPXB-33 and tabs for attaching junction shells. DPX2-34B 1 DPXB-34 #4-40 THREAD - 17 DPX3-34 With six #4-40 clinch nuts in mounting holes 1 and tabs far attaching junction shells. - 17 ATTACHING TABS DPX4-34 1 With ten #4-40 clinch nuts in mounting holes (2 PER RETAINING and tabs for attaching junction shells, PLATE) MODIFICATION 17 ALTERNATE STYLE #4-40 CLINCH NUTS - 18 DPX2-33B With six #4-40 clinch nuts in mounting holes DPXB-33 and tabs for attaching junction shells. DPX2-34B DPXB-34 1 #4-40 THREAD DPX3-34 ATTACHING TABS (2 PER RETAINING PLATE) MODIFICATION 18 ALTERNATE STYLE 1 Applicable for all MA, ME, NA & NE Series Connectors. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-67

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 68 ARINC 404 DPX Modifications Codes Modfication Applicable Series Definition #4-40 CLINCH NUTS - 19** DPX2-33B With six #4-40 clinch nuts in mounting holes. DPXB-33 DPX2-34B DPXB-34 DPX3-33 DPX3-34 (Same as Code -01) Do not assign - use -01 code MODIFICATION 19 H - 20 DDPPXX22--3334AA Standard construction without tabs on insert retaining plate. MODIFICATION 20 With eight #4-40 clinch nuts in mounting holes. - 22 DPX2-33 and 34 DPX2-33A el DPX2-33B SUPERSEDED BY DPXB-33 n 01 MOD. DPX2-33M and 34M a DPX3-33 P DPXBME, DPX2ME, DPX3ME, DPX4ME - 33 only Same as 01. 01 Recommended d MODIFICATION 22 DPX2-33F and 34F n a - 23 DPX2-33 and 34 With floating eyelets. k .022 (0.56) MAX. (.00.3974) .025 (0.64) MAX. DDPPXX22--3333AB ac 4.0 P1L4A (C0.E3S6) MAX. (M.00.A14X98.) .(003.974 M)AX. (M.00.A39X74.) DDDPPPXXXB2B---333434B 1 R .255 (6.48) MIN .255 (6.48) .015 DPX3-33 and 34 DIA. MAX. DIA. MAX. (0.38) DPX4-33 and 34 DPX2-33F and 34F 4 PLACES MIN RIVET FRONT FACE OF 4 REQD. - 34 RECEPT. FLANGE - 33 PLUG MODIFICATION 23 - 24 DPX2-34A With six mounting holes .208 (5.28) dia. (Foating eyelets omitted) DPX2-33B MOUNTING - 25 DPX2-34B With four mounting holes .157 (3.99)/.155 (3.94) dia. (Clinch nuts omitted) HOLES(4), . 156(3.96) DPXB-34 1 DIA. MODIFICATION 25 - 26 DPX2-34B Mounting holes .120 (3.05) dia. countersunk 82* to .230 (5.84) dia. DPXB-34 and has tabs for attaching junction shells. DPX3-34 1 MOUNTING HOLES(4), . 120 (3.05) DIA., C'SUNK 82 TO .230 (5.84) DIA. MODIFICATION 26 - 29 DPX2-34A With interfacial seal (if pins) without junction shell tabs and military gold plating on the contact. - 29 DPXBME-34P & 33S Standard except less grommet* DPX2ME-34P & 33S DPX3ME-34P & 33S 1 DPX4ME-34P & 33S * On the A106S layout the grommet is replaced by the separator. - 30 DPXBME-34P Standard except less grommet and with tabs for DPX2ME-34P attaching junction shells. DPX3ME-34P 2 (-34 pin only) DPX4ME-34P - 31 DPXBME-34P Standard except less grommet and with floating DPX2ME-34P bushings. (Slatted shells). DPX3ME-34P 2 DPX4ME-34P DPXBME-34P Standard except less grommet and with clinch - 33 DPX2ME-34P nuts in mounting holes. DPX3ME-34P 2 DPX4ME-34P DPXBME-34P Standard less grommet and with clinch nuts in mounting holes - 37 DPX2ME-34P and with tabs for attaching junction shells. DPX3ME-34P DPX4ME-34P 2 1 Applicable for all MA, ME, NA and NE Series Connectors. 2 **Indicates polarizing position. (See page 72) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-68

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 69 ARINC 404 DPX Modifications Codes Modfication Applicable Series Definition - 39** DPXB-33 & 34 With floating eylets & tabs for attaching junction shells. FLOATING BUSHINGS DPX2-33B DPX2-34B 1 DPX3-33 & 34 DPX4-33 & 34 #4-40 THREAD ATTACHING TABS (2 PER RETAINING H PLATE) MODIFICATION 39 ALTERNATE STYLE The -7*** and 8*** Modification Codes are reserved for connectors which have Low Insertion Force (LIF) Contacts. R The LIF design is not applicable to thermocouple contacts, coaxial contacts and contacts larger than size 8 and Standard size 20 a - 70** All DPX series with Same as -00 with addition of LIF contacts c LITTLE CAESAR retention See Contact Section Page 54 k - 71 All DPX series with Same as -31 with addition of LIF contacts a LITTLE CAESAR retention See Contact Section Page 54 n - 72 All DPX series with Same as -01 with addition of LIF contacts d LITTLE CAESAR retention See Contact Section Page 54 P - 73 All DPX series with Same as -23 with addition of LIF contacts LITTLE CAESAR retention See Contact Section Page 54 a n - 74 All DPX series with Same as -33 with addition of LIF contacts LITTLE CAESAR retention See Contact Section Page 54 e l - 75 All DPX series with Same as -02 with addition of LIF contacts LITTLE CAESAR retention See Contact Section Page 54 - 76 All DPX as listed for code -22 Same as -22 with addition of LIF contacts - 77 All DPXB series Mounting holes .120 (3.05) dia. countersunk 82 to .230 (5.84) dia. and has LIF contacts. - 78 - 79 All DPX series with Same as -29 with addition of LIF contacts LITTLE CAESAR retention 1 Applicable for all MA, ME, NA and NE Series Connectors. 2 Applicable for NE Series Also. **Indicates polarizing position. (See page 72) Polarization Two Post Type Face View of Engaging End DPX2-33F DPX2-34F or 33M or 34M LEFT POST LEFT POST B B COUPLING COUPLING POT MECHANISM POT MECHANISM RIGHT POST RIGHT POST A A Three Post Type DPXB-33 DPXB-34 DPX2-33A or 33B LEFT POST LEFT POST CENTER POST CENTER POST TOP LEFT POST RIGHT POST RIGHT POST B CENTER POST RIGHT POST A DPX2-34A or 34B DPX3-33 DPX4-33 TOP LEFT POCSETNTER POST A TOP LEFT POST LEFT POST TOP OR KEY CENTER POST CENTER POST OR KEY RIGHT POST OR KEY RIGHT POST B RIGHT POST Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-69

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 70 ARINC 404 DPX Polarization Positions 1 2 3 4 5 6 Dark areas represent post Two Post Type H DPX2 33 PLUG MALE SHELL ONLY DPX2 34 RECEPTACLE FEMALE SHELL ONLY Position Left Post Right Post Position Left Post Right Post Position Left Post Right Post Position Left Post Right Post 01 4 4 09 3 3 01 1 1 09 2 2 02 5 4 10 4 2 02 1 6 10 3 1 l 03 6 4 11 2 2 03 1 5 11 3 3 e 04 2 4 12 3 2 04 1 3 12 3 2 n 05 3 4 13 2 1 05 1 2 13 4 3 a 06 4 3 14 3 1 06 2 1 14 4 2 P 07 5 3 15 2 6 07 2 6 15 5 3 08 2 3 08 2 3 d n Three Post Type DPXB, DPX2 33B, DPX2 34B, DPX3 and DPX4 a PLUG SHELL RECEPTACLE SHELL k c Left Center Right Left Center Right Left Center Right Left Center Right a Position Post Post Post Position Post Post Post Position Post Post Post Position Post Post Post R 01 1 1 1 51 3 2 5 01 4 4 4 51 6 3 2 02 2 1 1 52 4 2 5 02 4 4 3 52 6 3 1 03 3 1 1 53 5 2 5 03 4 4 2 53 6 3 6 04 4 1 1 54 6 2 5 04 4 4 1 54 6 3 5 05 5 1 1 55 1 2 4 05 4 4 6 55 1 3 4 06 6 1 1 56 2 2 4 06 4 4 5 56 1 3 3 07 1 1 6 57 3 2 4 07 5 4 4 57 1 3 2 08 2 1 6 58 4 2 4 08 5 4 3 58 1 3 1 09 3 1 6 59 5 2 4 09 5 4 2 59 1 3 6 10 4 1 6 60 6 2 4 10 5 4 1 60 1 3 5 11 5 1 6 61 1 2 3 11 5 4 6 61 2 3 4 12 6 1 6 62 2 2 3 12 5 4 5 62 2 3 3 13 1 1 5 63 3 2 3 13 6 4 4 63 2 3 2 14 2 1 5 64 4 2 3 14 6 4 3 64 2 3 1 15 3 1 5 65 5 2 3 15 6 4 2 65 2 3 6 16 4 1 5 66 6 2 3 16 6 4 1 66 2 3 5 17 5 1 5 67 1 2 2 17 6 4 6 67 3 3 4 18 6 1 5 68 2 2 2 18 6 4 5 68 3 3 3 19 1 1 4 69 3 2 2 19 1 4 4 69 3 3 2 20 2 1 4 70 4 2 2 20 1 4 3 70 3 3 1 21 3 1 4 71 5 2 2 21 1 4 2 71 3 3 6 22 4 1 4 72 6 2 2 22 1 4 1 72 3 3 5 23 5 1 4 73 1 3 1 23 1 4 6 73 4 2 4 24 6 1 4 74 2 3 1 24 1 4 5 74 4 2 3 25 1 1 3 75 3 3 1 25 2 4 4 75 4 2 2 26 2 1 3 76 4 3 1 26 2 4 3 76 4 2 1 27 3 1 3 77 5 3 1 27 2 4 2 77 4 2 6 28 4 1 3 78 6 3 1 28 2 4 1 78 4 2 5 29 5 1 3 79 1 3 6 29 2 4 6 79 5 2 4 30 6 1 3 80 2 3 6 30 2 4 5 80 5 2 3 31 1 1 2 81 3 3 6 31 3 4 4 81 5 2 2 32 2 1 2 82 4 3 6 32 3 4 3 82 5 2 1 33 3 1 2 83 5 3 6 33 3 4 2 83 5 2 6 34 4 1 2 84 6 3 6 34 3 4 1 84 5 2 5 35 5 1 2 85 1 3 5 35 3 4 6 85 6 2 4 36 6 1 2 86 2 3 5 36 3 4 5 86 6 2 3 37 1 2 1 87 3 3 5 37 4 3 4 87 6 2 2 38 2 2 1 88 4 3 5 38 4 3 3 88 6 2 1 39 3 2 1 89 5 3 5 39 4 3 2 89 6 2 6 40 4 2 1 90 6 3 5 40 4 3 1 90 6 2 5 41 5 2 1 91 1 3 4 41 4 3 6 91 1 2 4 42 6 2 1 92 2 3 4 42 4 3 5 92 1 2 3 43 1 2 6 93 3 3 4 43 5 3 4 93 1 2 2 44 2 2 6 94 4 3 4 44 5 3 3 94 1 2 1 45 3 2 6 95 5 3 4 45 5 3 2 95 1 2 6 46 4 2 6 96 6 3 4 46 5 3 1 96 1 2 5 47 5 2 6 97 1 3 3 47 5 3 6 97 2 2 4 48 6 2 6 98 2 3 3 48 5 3 5 98 2 2 3 49 1 2 5 99 3 3 3 49 6 3 4 99 2 2 2 50 2 2 5 50 6 3 3 The last two digits in the DPX nomenclature (ex: DPXB-8-33B-0014) refer to the polarizing post position. When the last two digi ts are omitted it means the polarizing posts will not be assembled and position number is not stamped on the connector. This allows the customer to positio n the posts themselves and then stamp the appropriate number on the shell. If the last two digits are made 00 it means the polarizing posts are deleted. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-70

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 71 ARINC 404 DPX Panel Cutouts DPXA 1.781 (45.24) .125 (3.15) RAD. TYP. .750 1.140 (19.05) (28.96) H NOTE -WHEN USING THE -2301 FLOATING EYELET .120 (3.05) DIA. 2.062 (52.38) MODIFICATION, ADD .050 (1.27) TO THE CUTOUT R 4 HOLES SIZE TO ALLOW FOR FLOAT (EXCEPTION -34A) a c k DPXB a 1.437 (36.50) n C L OF .718 1.720 (13.64.3570) d INSERT C L (18.24) (43.70) C L (1.781.284) C L OF INSERT Pa n 1.720 1.350 .720 .580 (43.70) (34.30) (18.29) (14.73) 1.440 e .720 (3.66) l (18.29) .1204 (H3O.0L5E) SDIA. (14.37.2609) (1..15426.2515 R). TYP. 1.(7138..21 (584).52) .260. 1(62.06 0(3).05) DIA. (3.18) 4 HOLES - 33 Front Mount - 33 Rear Mount - 34 Rear Mount - 34 Front Mount Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-71

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 72 ARINC 404 DPX Panel Cutouts DPX2 All tolerances are +_ .015 (0.38) unless otherwise noted. .156 R. TYP. 2.062 (52.38) 2.062 (52.38) (3.96) 1.031 .120 (3.05) DIA 2.062 (52.38) .120 (3.05) DIA. 1.031 .120 (3.05) DIA. (26.19) 8 HOLES .750 TYP. 1.031 8 HOLES (26.16) 8 HOLES C L (19.05) (26.16) C L H .7(1590. T05Y)P .7(5109 .T0Y5)P. C L (27.18.0100) C L 2.230(26.87.0600) C L (27.28.4100) (56.60) l e .469 TYP. .469 TYP. n .469 TYP. (11.91) (11.91) a (11.91) P 1.160 1.780 d 1.720 (43.70) .125(3 R.1.8 T)YP. (219.6.5300) (45.20) (41.40) n a - 33 FRONT MOUNT - 33 REAR MOUNT - 34 FRONT OR REAR MOUNT k c a 1 1.437 1.630 (36.50) R (41.40) .125(3 R.1.8 T)YP. 1.720 (43.70) .120 (3.05) .718 .120 (3.05) DIA. 1.160 6 HOLES (18.24) 4 HOLES (29.46) C L 1.391 1.391 (35.33) 1.391 (35.33) 2.783 C L (26.24.6500) (35.33C L) (14.88.9000) C L (26.35.0500) (70.69) 2.350 2.783 2.783 (59.69) (70.69) (70.69) (1.781.284) 1.C 4L37 .OH1OM20LIT E( 3SC. 0EF5NO) TRDE I AR- .3 63 BHOLES 1.4C L37 (1.781.284) (14.57.8201) .(135.966 R). TYP. (36.50) (36.50) - 33A & -33B FRONT MOUNT - 33A REAR MOUNG - 34B FRONT MOUNT 1 For - 23 float mtg. mod. 1.78 (45.21). 1.437 1.437 (36.50) (36.50) .120 (3.05) DIA. .120 (3.05) DIA. .718 4 HOLES 6 HOLES (18.24) .718 C L (18.24) C L 1.391 1.391 (35.33) (35.33) 2.500 (63.50) 2.550 C L (64.77) C L 1.970 2.783 (70.69) 2.783 (50.04) (70.69) 1.260 .156 R. TYP. (32.00) 1.830 (3.96) (46.48) 1.780 (45.21) - 34A REAR MOUNT - 33B REAR MOUNT (-34A FRONT MOUNT CONSULT FACTORY) - 33B REAR MOUNT Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-72

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 73 ARINC 404 DPX Panel Cutouts DPX3 All tolerances are +_ .015 (0.38) unless otherwise noted. 1.437 (36.50) 1.437 .718 (18.24) (36.50) .718 (18.24) .1206 (H3O.0L5E) SDIA. C L .120 (3.05) DIA. .125 R. TYP. H 6 HOLES (3.18) 2.013 (51.13) R 2.013 (51.13) 3.740 a (95.00) c 3.740 C L 3.220 k C L (95.00) 4.026 (81.79) (102.26) a 4.026 n (102.26) d P 1.260 a (30.00) 1.780 1.780 n (45.21) (45.21) e FRONT MOUNT REAR MOUNT l DPX4 3.640 (92.46) 3.770 (95.76) 3.120 (79.25) 1.391 1.391 (35.33) (32.33) 2.500 C L (26.35.0500) C L 1.980 (63.50) 2.783 2.783 (50.29) (70.69) (70.69) .125 R. TYP. .120 (3.05) DIA. .930 (23.62) (3.18) .120 (3.05) DIA. .930 (23.62) 10 HOLES 10 HOLES 1.648 1.648 (41.86) (41.86) FRONT MOUNT REAR MOUNT Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-73

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 74 ARINC 404 DPX Crimp Sealing Plugs - DPX*ME (for environmental requirements) Material: Teflon Part Contact (All others thermoplastic) Number Size Color A B C 225-1013-000 22 Black .063 (1.6) .040 (1.0) .469 (11.9) 225-0070-000 20 Red .085 (2.2) .053 (1.3) .805 / .755 (20.5 / 19.2) 225-0071-000 16 Blue .115 (2.9) .074 (1.88) 1.472 / 1.422 (37.4 / 36.1) 225-0072-000 12 Yellow .171 (4.3) .120 (3.0) 1.441 / 1.391 (36.6 / 35.5) 225-0090-000 #5 and #9 Coax White .365 (9.3) .287 (7.3) .835 (21.2) H A B A B C C l e Filler Plugs - DPX* n a P Material: Teflon d (All others thermoplastic) NuPmarbte r CoSniztaect Color A B C n 225-0094-000 22 Black .069 (1.7) .051 (1.3) .420 (10.7) a 225-0095-000 20 Red .083 (2.1) .069 (1.7) .350 (8.9) k 225-0096-000 16 Blue .131 (3.3) .108 (2.7) .320 (8.1) c B A B A 225-0097-000 12 Yellow .187 (4.7) .156 (4.0) .320 (8.1) a #5 Coax R C 225-0098-000 White .275 (7.0) .251 (6.4) .450 (11.4) C (Pin) #5 and #9 Coax 225-0099-000 White .275 (7.0) .251 (6.4) 1.061 (26.9) (Socket) Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-74

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 75 ARINC 404 DPX Accessories Junction Shells 90 Angle (DPXA ONLY) DIECAST STRAIGHT JUNCTION SHELL .781 (19.84) 2.406 (61.11) 1.406 (35.71) 1.281 1.375 (32.54) (34.93) 1.843 (46.81) 1.281 (32.54) CABLE 1.781 ENTRY (45.24) 1.156 2.312 1.906 2.437 (29.36) (58.72) (48.41) (61.90) H APPROX. .187 R. TYP. .937 (4.75) Style Part Number (23.80) .125(3 R.1.8 T) YP. R (Right) DPXA 20745-22 a (Left) DPXA 20745-23 Style Part Number c (Right) DPX2 20745-10 k DPXA 22017 (Left) DPX2 20745-11 a n (DPXA ONLY) 90 ANGLE DPX2 DIECAST STRAIGHT JUNCTION SHELL d JUNCTION SHELL (SIDE OUTLET) P 1.406 (35.71) 3.406 (86.51) a 1.875 +_ .031 1.156 (29.36) 2.843 (72.21) (2.801.622 ) 1.281 n 1.281 (32.54) (47.63 +_ 0.79) .484 (12.29) (32.54) e 2.312 1.906 l (58.72) (48.41) 1.156 (29.36) CABLE ENTRY .187 R. TYP. (4.75) .125 R. TYP. .406 APPROX. (3.18) (10.31) CLINCH NUTS 1.062 (26.98) Style Part Number DPXA 22017-2 Style Part Number DPX2 20745-12 (DPXA ONLY) DIECAST 90 ANGLE JUNCTION SHELL STRAIGHT JUNCTION SHELL 2.468 (62.69) .837 (21.26) 1.906 (48.41) CABLE ENTRY 2.500 CABLE ENTRY (63.50) 1.938 APPROX. (49.23) 1.282 (32.56) .932 1.281 (23.67) (32.54) 1.157 (29.39) 1.406 1.782 (45.26) (35.71) Style Part Number Style Part Number DPXA 20745-21 DPXA 22017-1 DPX2 20745-8 Diecast junction shells may be used on DPXA connectors. They have 4-40 NC-2B tapped mounting holes for attaching to the shell mounting hardware. * DPX2 Junction Shells are also used on DPXB connectors. Dust Caps Conductive (black) Conductive (black) DPXB-60-1 for 34 Shell DPXA-59-1 for 33 Shells Conductive Dust Caps 025-0749-001 025-0767-001 Protect Against Static Electricity 34 33 Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-75

ca_H1-H116:Layout 1 2/10/11 8:23 AM Page 76 ARINC 404 DPX Accessories Coaxial Cable Reference Guide For BKA* DPX Series (Crimp, & Solder) Refernece MIL-C-17D & DPX NE/NA MIL-C-81659 Series Max Oper. Code Code Max Oper. Voltage Crimp Solder DPX BKA* RG/U Inner Dielectric DOD Jacket O.D Weight Temp, Range (Volts Suggested Type Type NE/NA ARINC Type Conductor Material (Inch) Material (Inch) (lbs/ft) ( C) RMS) Alt Cable Coax Coax Military Type Coax 7 0.0359 " Air-space 0.250 PVC 0.370 0.080 -40 + 80 1,000 Use RG63B l PE H 9 0.0855" PE 0.280 PVC 0.420 0.140 -40 + 80 4,000 Use RG214 R,AC Size 1(71W1) 55 0.0320 " PE 0.116 PE 0.206 0.032 -55 + 80 1,900 Use RG55B S C, J Size 1(71W1) Max. l 58 0.0320"BC PE 0.116 PVC 0.195 0.029 -40 + 80 1,900 Use RG58B D,P,G C, J, Z Size 5/9 Size 1(71W1) e JAC,AD AB Seal 1 Size 5 n 59 0.0253 " PE 0.146 PVC 0.242 0.032 -40 + 80 2,300 Use RG59B A,F,T D a 59B 0.0230" PE 0.146 PVC 0.242 0.032 -40 + 80 2,300 Use up to P 1000 MHz d 62 0.0253" Air-space 0.146 PVC 0,242 0.038 -40 + 80 750 Use RG62A A,F,T E PE n a 62A 0.0253" Air-space 0.146 PVC 0.242 0.038 -40 + 80 750 PE k 71 0.0253" Air-space 0.146 PVC 0.250 0.046 -40 + 80 750 Use RG71B E c PE Max. a 115 0.0840" PTFE 0.250 FG Braid 0.375 0.148 -55 + 250 5,000 Use RG115A V Size 1(71W1) R 142 0.0359" PTFE 0.116 FG Braid 0.206 0.047 -55 + 250 1,900 Use RG142A S,AE Size 5/9 Size 1(71W1) Max. Seal 1 Size 1(71W1A) 142B 0.0390" PTFE 0.116 FEP 0.195 0.050 -55 + 200 1,900 Size 1(71W1A) Size 5 D,H,U, Size 5/9 Size 5 174 0.0189" PE 0.060 PVC 0.100 0.008 -40 + 80 1,500 AF Seal 2 Size 12 178 0.0120" PTFE 0.036 KEL-F 0.079 0.0054 -40 + 150 1,000 Use RG178B ER,K,AG, Size 5/9 Size 5 Max. L,M,AF Seal 1 Size 5/9 179 0.0120 " PTFE 0,057 KEL-F 0.094 0.010 -55 + 150 1,200 Use RG1798 D,H,U, Seal 1 Size 5 Max. AF Seal 2 179B 0.0120" PTFE 0.063 FEP 0.100 0.010 -55 + 200 1,200 Size 5 180 0.0120" PTFE 0.103 KEL-F 0.141 0.019 -40 + 150 1,500 Use RG180B CAB B Size 5/9 Size 5 Max. Seal 1 0.145 AB Size 5 180B 0.0120" PTFE 0.102 FEP Max. 0.019 -55 + 200 1,500 187 0.0120" PTFE 0.060 PTFE 0.110 0.010 -55 + 250 1,200 Use RG179B D,H,U, A,K Size 5 Max . AF 188 0.0201" PTFE 0.060 PTFE 0.110 0.011 -55 + 250 1,200 Use RG316 D,A,U A,K Max. AF 195 0.0120" PTFE 0.102 PTFE 0.155 0.020 -55 + 250 1,500 Use RG180B CAB B Size 5 Max. 196 0.0120' PTFE 0.034 PTFE 0.080 0.006 -55 + 250 1,000 Use RG178B E,R,K. AA Size 5/9 Size 5 Max. L,AA,AG Seal 1 214 0.0888" PE 0.285 PVC 0.425 0.126 -40 + 80 5,000 R,AC Size 1(71W1) Size 1(71W1A) 223 0.035 " pE 0.116 PVC 0.216 0.034 -40 + 80 1,900 C,J Max. 225 0.0936" PTFE 0.285 FG Braid 0.430 0.180 -55 + 250 5,000 Size 5/9 Size 1(71W1) Seal 2 316 0.0201 PTFE 0.060 FEP 0.102 0.012 -55 + 200 Size 5/9 1,200 Use RG188A Seal 2 393 0.0936" PTFE 0.285 FEP 0.390 0.165 -55 + 200 5,000 Use RG225 Size 1(71W1A) 400 0.0385" PTFE 0.116 FEP 0.195 0,050 -55 + 200 1,900 Size 1(71W1) Size 1(71W1) 402 0.0360" PTFE 0.119 None 0.141 0.032 -55 + 200 2.500 Use RG142B Size 1(71W1A) NOTE: This table is shown for reference only. ITT Cannon recommends that the above information be used as a guideline and may be subject to variation between various cable manufacturers. For specific information concerning the actual physical characteristics of a specific cable, contact the manufacturer. Dimensions shown in inches (mm) Specifications and dimensions subject to change www.ittcannon.com H-76