Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting Fuse > 216SP Series 216SP Series, 5×20 mm, Fast-Acting Fuse RoHS Pb PS E Description The 216SP Series is a 5×20mm fast-acting ceramic body cartridge fuse designed to IEC specification. Features • Conforms with the • Meets Standard Sheet 1 international IEC 60127-2 of IEC 60127-2 as a Fast- for use globally Acting fuse • High breaking capacity • RoHS compliant and lead-free Agency Approvals Applications Used as supplementary protection in appliance or Agency Agency File Number Ampere Range utilization equipment to provide individual protection for NBK080205-E10480B 1A – 5A PES NBK250702-E10480F 6.3A – 10A components or internal circuits. 2019010207215330 1A – 10A SU05001-11001A 1A – 2.5A Electrical Characteristics for Series SU05001-11002A 3.15A – 6.3A E10480 1A – 10A % of Ampere Ampere Rating Opening Time 29862 1A – 10A Rating 40013834 1 – 6.3A 1A – 4A 30 minutes, Maximum 210% 5A – 6.3A 30 minutes, Maximum J50248090 8A, 10A 8A – 10A 30 minutes, Maximum N/A 1A – 10A 1A – 4A 0.01 sec.., Min.; 2 sec. Max. 275% 5A – 6.3A 0.01 sec.., Min.; 3 sec. Max. 8A – 10A 0.04 sec., Min.; 20 sec. Max. Additional Information 1A – 4A 0.003 sec., Min.; 0.3 sec. Max. 400% 5A – 6.3A 0.003 sec., Min.; 0.3 sec. Max. 8A – 10A 0.01 sec.., Min.; 1.0 sec. Max. 1A – 4A 0.02 seconds, Maximum 1000% 5A – 6.3A 0.02 seconds, Maximum 8A – 10A 0.03 sec.onds, Maximum Datasheet Resources Samples Electrical Characteristic Specifications by Item Maximum Agency Approvals Nominal Maximum Nominal Power Amp Amp Voltage Interrupting Resistance Voltage Drop at Melting I2t Dissapation at Code Rating Rating Rating+ Cold Ohms (A2 sec)* Rated Current 1.5ln PES (Ohms) (mV) (W) 001. 1 250 0.2370 0.18000 1000 2.5 x x x x x x x 01.6 1.6 250 0.1112 1.00500 600 4 x x x x x x x 002. 2 250 0.0764 1.87000 500 4 x x x x x x x 02.5 2.5 250 0.0584 3.67200 400 4 x x x x x x x 3.15 3.15 250 1500 A @ 0.0368 6.70000 350 4 x x x x x x x 004. 4 250 250 VAC 0.0247 14.99500 300 4 x x x x x x x 005. 5 250 0.0183 27.46000 250 4 x x x x x x x 06.3 6.3 250 0.0137 56.43000 200 4 x x x x x x x 008. 8 250 0.0123 64.31500 200 4 x x x x x x 010. 10 250 0.0079 154.34000 200 4 x x x x x x * - I2t test at 10x rated current + - Interrupting Rating may differ based on Agency Approval. See Agency Approval certificate for more details. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/19

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting Fuse > 216SP Series Temperature Re-rating Curve Average Time Current Curves 1A 1.6A 2A 2.5A 3.15A 4A 5A 6.3A 8A 10A 10000 1000 100 s) 10 d n o c e s 1 e ( m Ti 0.1 0.01 0.001 0.01 0.1 1 10 100 Amps Soldering Parameters - Wave Soldering 300 Recommended Process Parameters: C) - Measured on bottom side of board 11111222228024680246800000000000 ( SPD roe eTTPpleedhermmneeedhraspp e WtPoee:anorrat aaF tTvttl Tuuuiexmerr eeAmPec aMMt:pirveaaiantrmixoaiminmte Tuuteuremmemrp::e:rature) (1162T05y06Lp00-0ei1c°°°aa8CCCld 0I n- MdFsuerasectxreoyim nRRdeuecsmcomommemndeatniodn)ation mperature (° 246000 RSeocldoemr mDweenldl Teidm eH:and-Solder 2P-a5r saemcoentdesrs: Te 00 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Solder Iron Temperature: 350°C +/- 5°C Time (Seconds) Heating Time: 5 seconds max. Preheat Time Cooling Time Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. Different values of A and B available, please contact the Littelfuse sales representative in your region: A B For the pigtailed fuse, please follow the recommendations below for axial lead forming and mounting into PCB: C Lead forming: The distance C between cap flat surface and axial lead shall be greater than 1.0 mm. C A PCB mounting: According to the standard of IPC-A-610, the distance B between PCB and fuse cap is recommended to be a minimum of 1.5 mm. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/19

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting Fuse > 216SP Series Product Characteristics Body: Ceramic Operating Temperature –55ºC to +125ºC Materials Cap: Nickel–plated Brass MIL-STD-202, Method 107, Test Condition Leads: Tin–plated Copper Thermal Shock B (5 cycles, –65ºC to +125ºC) Terminal Strength MIL-STD-202, Method 211, Vibration MIL-STD-202, Method 201 Test Condition A MIL-STD-202, Method 103, Test Condition Solderability MIL-STD-202 Method 208 Humidity A (High RH (95%) and elevated temp (40ºC) for 240 hours) Product Marking CCaapp 12:: ABgraenndc ylo agpop, rcouvrarle mnta arknsd voltage ratings Salt Spray MBIL-STD-202, Method 101, Test Condition Dimensions Part Numbering System All dimensions in mm 0216 xxxx M X E SP P 40 ± 1.0 20 ± 0.5 ø 5 . 2 +-00..21 Series Lead-Free Current Rating Code Single-Cap Pigtail ø0.65±0.05* Refer to Amp Code column of Electrical Characteristics Table 5.1 ± 0.6 5.1 ± 0.6 Quantity Code Option Codes M = 1000 E : Axial Leaded Fuse Notes: * Ratings 8A and 10A have 0.8 ± 0.05 diameter lead. Packaging Code X = Filler Packaging Packaging Packaging Packaging Reel Quantity Option Specification Code Size 216SP Series Bulk N/A 1000 MXE N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/19