Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series 216 Series, 5×20 mm, Fast-Acting Fuse RoHS Pb PES Description 5×20mm fast-acting ceramic body cartridge fuse designed to IEC specification. Features • Designed to International • Available in cartridge and (IEC ) Standards for use axial lead form globally • RoHS compliant and • Meets the IEC 60127-2, lead-free sheet 1 specification for fast-acting fuses Agency Approvals Applications Agency Agency File Number Ampere Range Cartridge: Used as supplementary protection in appliance or 1-5A NBK 090205-E10480A utilization equipment to provide individual protection for 6.3A-10A NBK 250702-E10480E components or internal circuits. 12.5A NBK 240108-JP1021C 16A NBK 240108-JP1021E PES Leaded: 1A – 16A Electrical Characteristics for Series 1-5A NBK 090205-E10480B 6.3A-10A NBK 250702-E10480F % of Ampere Ampere Rating Opening Time 12.5A NBK 240108-JP1021D Rating 16A NBK 240108-JP1021F 0.05A – 4A 60 minutes, Minimum 2003010207079960 0.05A – 6.3A 150% 5A – 6.3A 60 minutes, Minimum 8A – 16A 30 minutes, Minimum SU05001-2013 1A – 10A 0.05A – 4A 30 minutes, Maximum E10480 210% 5A – 6.3A 30 minutes, Maximum 0.05A – 16A 8A – 16A 30 minutes, Maximum 29862 0.05A – 4A 0.01 sec.., Min.; 2 sec. Max. 1706869 0.05A - 10A, 16A 275% 5A – 6.3A 0.01 sec.., Min.; 3 sec. Max. 0.05A – 6.3A 8A – 16A 0.04 sec., Min.; 20 sec. Max. 40013834 *8A, *10A 0.05A – 4A .003 sec., Min.; 0.3 sec. Max. 40016442 *12.5A 400% 5A – 6.3A .003 sec., Min.; 0.3 sec. Max. 8A – 16A .01 sec.., Min.; 1.0 sec. Max. KM41462 1A – 6.3A 0.05A – 4A .02 seconds, Maximum J50248090 8A – 16A 1000% 5A – 6.3A .02 seconds, Maximum 8A – 16A .03 sec.onds, Maximum N/A 0.05A – 16A *Approval for Cartridge versions only Additional Information Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2017 Littelfuse, Inc. Application testing is strongly recommended.Specifications are subject to change without notice. Revised: 04/12/17

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Electrical Characteristics Specifications by Item Maximum Agency Approvals Maximum Nominal Voltage Amp Voltage Nominal Power Amp Interrupting Cold Drop at Rating Rating Melting Dissapation Code (A) (V) Rating Resistance I2t (A2 sec) Rated at 1.5ln PES (Ohms) Current (W) (mV) .050 0.05 250 15.9000 0.00019 10000 1.6 x x x x x x .063 0.063 250 10.4500 0.00079 8800 1.6 x x x x x x .080 0.08 250 7.8850 0.00084 7600 1.6 x x x x x x .100 0.1 250 5.7925 0.00450 7000 1.6 x x x x x x .125 0.125 250 3.6750 0.00546 5000 1.6 x x x x x x .160 0.16 250 5.3490 0.00326 4300 1.6 x x x x x x .200 0.2 250 3.3500 0.00439 3500 1.6 x x x x x x .250 0.25 250 2.3500 0.01350 2800 2.5 x x x x x x .315 0.315 250 1.8500 0.02320 2500 2.5 x x x x x x .500 0.5 250 0.8660 0.16500 1800 2.5 x x x x x x .630 0.63 250 0.4650 0.05940 1500 2.5 x x x x x x .800 0.8 250 1500A@ 0.2950 0.14600 1200 2.5 x x x x x x 250Vac 001. 1 250 0.2370 0.18000 1000 2.5 x x x x x x x x x 1.25 1.25 250 0.1530 0.48000 800 4 x x x x x x x x x 01.6 1.6 250 0.1112 1.00500 600 4 x x x x x x x x x 002. 2 250 0.0764 1.87000 500 4 x x x x x x x x x 02.5 2.5 250 0.0584 3.67200 400 4 x x x x x x x x x 3.15 3.15 250 0.0368 6.70000 350 4 x x x x x x x x x 004. 4 250 0.0247 14.99500 300 4 x x x x x x x x x 005. 5 250 0.0183 27.46000 250 4 x x x x x x x x x 06.3 6.3 250 0.0137 56.43000 200 4 x x x x x x x x x 008. 8 250 0.0123 64.31500 200 4 x x x x x x* x x 010. 10 250 0.0079 154.34000 200 4 x x x x x x* x x 12.5 12.5 250 0.0057 175.00000 200 N/A** x x x x* x x 750A@ 016. 16 250 0.0040 462.50000 200 N/A** x x x x x x 250Vac * Approval for cartidge versions only. N/A** - Please contact Littelfuse for details on these parameters Average Time Current Curves I2t test at 10x rated current Temperature Re-rating Curve 0.050A0.063A0.080A0.100A0.125A0.160A0.200A0.250A0.315A0.500A0.630A0.800A1A1.25A1.6A2A2.5A3.15A4A5A6.3A8A10A12.5A16A 10000 1000 100 TIME IN SECONDS 110 0.1 0.01 0.001 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/12/17

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 Measured on bottom side of board 111112222202468024680000000000 ( SPD roe eTTPpleedhermmneeedhraspp e WtPoee:anorrat aaF tTvttl Tuuuiexmerr eeAmPec aMMt:pirveaaiantrmixoaiminmte Tuuteuremmemrp::e:rature) (1162T05y06Lp00-0ei1c°°°aa8CCCld 0I n- MdFsuerasectxreoyim nRRdeuecsmcomommemndeatniodn)ation mperature (°C) - 24680000 RSeocldoemr mDweenldl Teidm eH:and-Solder 2P-a5r saemcoentdesrs: Te 00 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Solder Iron Temperature: 350°C +/- 5°C Time (Seconds) Heating Time: 5 seconds max. Preheat Time Cooling Time Note: These devices are not recommended for IR or Dwell Time Convection Reflow process. Product Characteristics Body: Ceramic Operating Temperature –55ºC to +125ºC Cap: Nickel–plated brass Material Leads: Tin–plated Copper MIL-STD-202, Method 107, Test Filler (160mA-16A): Sand Thermal Shock Condition B: (5 cycles –65°C to MIL-STD-202, Method 211, Test +125°C) Terminal Strength Condition A Vibration MIL-STD-202, Method 201 Solderability MIL-STD-202 Method 208 Cap 1: Brand logo, current and MIL-STD-202, Method 103, Test Condition A. high RH (95%) and Product Marking voLage rating Humidity elevated temperature (40°C) for 240 Cap 2: Agency approval markings hours. Available in Bulk (M=1000 pcs/pkg) Packaging or on Tape/Reel (MRET1=1000 pcs/ Salt Spray MIL-STD-202, Method 101, Test reel) Condition B © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/12/17

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Dimensions Part Numbering System 20±0.5 0216 xxxx M X E P 0216 000XP 5.2+0.1 −0.2 Series 5.1±0.6 5.1±0.6 Amp Code 5.6±0.4 Refer to Amp Code column of 0216.050XEP 40±1.0 21.5±1.0 Electrical Characteristics Table to 0216.800XEP Quantity Code 0.65±0.05 M = 1000 Packaging Code 5.5±0.3 0216001.XEP 40±1.0 21.5±1.0 X = Filler to 0216016.XEP Option Codes 0.65±0.05* Blank : Cartidge Type Fuse E : Axial Leaded Fuse All dimensions in mm Lead-free Notes: * Ratings above 6.3 A have 0.8 ± 0.05 diameter lead. Packaging Quantity & Packaging Option Packaging Specification Quantity Taping Width Packaging Code 216 Series Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Reel and Tape EIA 296-E 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Recommended Accessories Max Max Accessory Series Description Application Application Type Voltage Amperage 345_ISF Panel Mount Shock-Safe Fuseholder 10 Holder 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20A 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 10 Block 646 PC Mount Miniature Fuse Block 250 6.3 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 Clip 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact Littelfuse for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/12/17