Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series 216 Series, 5×20 mm, Fast-Acting Fuse RoHS Pb PS E Description The 216 Series is a 5x20mm, Fast-Acting, ceramic body, cartridge fuse designed to IEC specifications Features • Conforms with the • Available in cartridge and international IEC 60127-2 axial lead form for use globally • RoHS compliant and • Meets Standard Sheet 1 lead-free of IEC 60127-2 as a Fast- Acting fuse Agency Approvals Applications Used as supplementary protection in appliance or Agency Agency File Number Ampere Range utilization equipment to provide individual protection for Cartridge: 1-5A NBK 080205-E10480A components or internal circuits. 6.3A-10A NBK 250702-E10480E 12.5A NBK 240108-JP1021C Electrical Characteristics for Series 16A NBK 240108-JP1021E PS 1A – 16A E Leaded: 1-5A NBK 080205-E10480B % of Ampere Ampere Rating Opening Time 6.3A-10A NBK 250702-E10480F Rating 12.5A NBK 240108-JP1021D 0.05A – 4A 60 minutes, Minimum 16A NBK 240108-JP1021F 150% 5A – 6.3A 60 minutes, Minimum 2003010207079960 0.05A-10A 8A – 16A 30 minutes, Minimum 0.05A – 4A 30 minutes, Maximum SU05001-2013 1A – 10A 210% 5A – 6.3A 30 minutes, Maximum E10480 8A – 16A 30 minutes, Maximum 0.05A – 16A 0.05A – 4A 0.01 sec.., Min.; 2 sec. Max. 29862 275% 5A – 6.3A 0.01 sec.., Min.; 3 sec. Max. 1402843 0.05A - 10A, 16A 8A – 16A 0.04 sec., Min.; 20 sec. Max. 0.05A – 6.3A 0.05A – 4A 0.003 sec., Min.; 0.3 sec. Max. 40013834 *8A, *10A 400% 5A – 6.3A 0.003 sec., Min.; 0.3 sec. Max. 40016442 *12.5A 8A – 16A 0.01 sec.., Min.; 1.0 sec. Max. 0.05A – 4A 0.02 seconds, Maximum KM41462 1A – 6.3A 1000% 5A – 6.3A 0.02 seconds, Maximum 8A – 16A 0.03 sec.onds, Maximum J50248090 8A – 16A N/A 0.05A – 16A *Approval for Cartridge versions only Additional Information Datasheet Resources Samples Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/19

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Electrical Characteristics Specifications by Item Maximum Agency Approvals Maximum Nominal Voltage Amp Voltage Nominal Power Amp Interrupting Cold Drop at Rating Rating Melting Dissapation Code (A) (V) Rating+ Resistance I2t (A2 sec) Rated at 1.5ln PES (Ohms) Current (W) (mV) 0.050 0.05 250 15.9000 0.00019 10000 1.6 - - x x x x x x - - - 0.063 0.063 250 10.4500 0.00079 8800 1.6 - - x x x x x x - - - 0.080 0.08 250 7.8850 0.00084 7600 1.6 - - x x x x x x - - - 0.100 0.1 250 5.7925 0.00450 7000 1.6 - - x x x x x x - - - 0.125 0.125 250 3.6750 0.00546 5000 1.6 - - x x x x x x - - - 0.160 0.16 250 5.3490 0.00326 4300 1.6 - - x x x x x x - - - 0.200 0.2 250 3.3500 0.00439 3500 1.6 - - x x x x x x - - - 0.250 0.25 250 2.3500 0.01350 2800 2.5 - - x x x x x x - - - 0.315 0.315 250 1.8500 0.02320 2500 2.5 - - x x x x x x - - - 0.500 0.5 250 0.8660 0.16500 1800 2.5 - - x x x x x x - - - 0.630 0.63 250 0.4650 0.05940 1500 2.5 - - x x x x x x - - - 1500A@ 0.800 0.8 250 0.2950 0.14600 1200 2.5 - - x x x x x x - - - 250Vac 001.0 1 250 0.2370 0.18000 1000 2.5 x x x x x x x x - - x 1.25 1.25 250 0.1530 0.48000 800 4 x x x x x x x x - - x 01.6 1.6 250 0.1112 1.00500 600 4 x x x x x x x x - - x 002.0 2 250 0.0764 1.87000 500 4 x x x x x x x x - - x 02.5 2.5 250 0.0584 3.67200 400 4 x x x x x x x x - - x 3.15 3.15 250 0.0368 6.70000 350 4 x x x x x x x x - - x 004.0 4 250 0.0247 14.99500 300 4 x x x x x x x x - - x 005.0 5 250 0.0183 27.46000 250 4 x x x x x x x x - - x 06.3 6.3 250 0.0137 56.43000 200 4 x x x x x x x x - - x 008.0 8 250 0.0123 64.31500 200 4 - x x x x x x x* - x x 010.0 10 250 0.0079 154.34000 200 4 - x x x x x x x* - x x 12.5 12.5 250 0.0057 175.00000 200 N/A** - - x x - x - x* x x 750A@ 016. 16 250 0.0040 462.50000 200 N/A** - - - x*** x x x - - x*** x 250Vac * - Approval for cartidge versions only. ** - Please contact Littelfuse for details on these parameters I2t test at 10x rated current *** - 1500A@250Vac for 16A +Interrupting Rating may differ based on Agency Approval. See Agency Approval certificate for more details. Temperature Re-rating Curve Average Time Current Curves 0.050A0.063A0.080A0.100A0.125A0.160A0.200A0.250A0.315A0.500A0.630A0.800A1A1.25A1.6A2A2.5A3.15A4A5A6.3A8A10A12.5A16A 10000 1000 100 TIME IN SECONDS 110 0.1 0.01 Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation. 0.001 0.01 0.1 1 10 100 1000 CURRENT IN AMPERES © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/19

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Soldering Parameters - Wave Soldering Recommended Process Parameters: 300 Measured on bottom side of board 111112222202468024680000000000 ( SSPD roo eeTTPllpddeehreeemmeenrrhad pptPDes:eeo aworrttaanW eTTtt Fuuelilaml rrmuTveexiee mp MMA: ePceriatan:aixvrtiamiaumtmrioueunm:em Tte:e:mrperature) (11622T0506-y500-0p1 °°°sLi8cCCCee0ac alM osdInnea-Fddcxrousimensetdur sRmy eRceocmommmenedndaatitoionn) Temperature (°C) - 2468000000 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 RSHNoeeolacdtteoein:rm gTIrm hoTeinems neTede d:me e5dpv s ieHcerecaasotn unadrdre-esS: mn3oo5latd0x °re.eCrc P+o/ma-r m5a°emCne dteedr sfo:r IR or Convection Reflow process. Time (Seconds) Preheat Time Cooling Time Dwell Time Product Characteristics Body: Ceramic Operating Temperature –55ºC to +125ºC Material CLeaapd: sN: iTcikne–lp–plaltaetedd C borpapsesr Thermal Shock McyIcLl-eSsT D–6-250°C2 ,t oM +e1th2o5d°C 1)07, Test Condition B: (5 Filler (160mA-16A): Sand Vibration MIL-STD-202, Method 201 Terminal Strength MIL-STD-202, Method 211, Test Condition A MIL-STD-202, Method 103, Test Condition A. Solderability MIL-STD-202 Method 208 Humidity high RH (95%) and elevated temperature (40°C) for 240 hours. Cap 1: Brand logo, current and Product Marking voLage rating Salt Spray MIL-STD-202, Method 101, Test Cap 2: Agency approval markings Condition B Available in Bulk (M=1000 pcs/pkg) or on Tape/Reel Packaging (MRET1=1000 pcs/reel) Dimensions Part Numbering System 20±0.5 0216 xxxx M X E P 0216 000XP 5.2+0.1 −0.2 Series 5.1±0.6 5.1±0.6 Amp Code Refer to Amp Code column of 5.6±0.4 0216.050XEP 40±1.0 21.5±1.0 Electrical Characteristics Table to 0216.800XEP Quantity Code 0.65±0.05 M = 1000 Packaging Code 5.5±0.3 0216001.XEP 40±1.0 21.5±1.0 X = Filler to Option Codes 0216016.XEP 0.65±0.05* Blank : Cartidge Type Fuse E : Axial Leaded Fuse All dimensions in mm Lead-free Notes: * Ratings above 6.3 A have 0.8 ± 0.05 diameter lead. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/19

Axial Lead & Cartridge Fuses 5×20 mm > Fast-Acting > 216 Series Packaging Quantity & Packaging Option Packaging Specification Quantity Taping Width Packaging Code 216 Series Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Reel and Tape EIA 296-E 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Recommended Accessories Max Max Accessory Series Description Application Application Type Voltage Amperage 345_ISF Panel Mount Shock-Safe Fuseholder 10 Holder 345 Shock-Safe Fuseholder with PC Mount, Solder Mount and Panel Mount options 20A 830 PC Mount Shock-Safe Miniature Fuseholder 16 520 Metric OMNI-BLOK® Fuse Block 10 Block 646 PC Mount Miniature Fuse Block 250 6.3 658 Surface Mount Miniature Fuse Block 10 520_W PC Mount Miniature Fuse Clip 6.3 Clip 111 PC Board Mount Fuse Clip 10 445 PC Board Mount Fuse Clip 10 Notes: 1. Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact Littelfuse for applications greater than the max voltage and amperage shown. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/13/19