Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series 215 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PES Description 5×20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification Features • Designed to International • Meets the IEC 60127-2, (IEC ) Standards for use Sheet 5 specification for globally Time-Lag fuses • High breaking capacity • RoHS compliant and lead-free Applications Agency Approvals Used as supplementary protection in appliance or Agency Agency File Number Ampere Range utilization equipment to provide individual protection for components or internal circuits. Cartridge: 1A – 5A NBK080205-E10480A 6.3A – 15A NBK250702-E10480E 16A – 20A Additional Information NBK100408-JP1021A PS E Leaded: 1A – 5A NBK080205-E10480B 6.3A – 15A NBK250702-E10480F 16A – 20A NBK100408-JP1021B Datasheet Resources Samples 2005010207145714 1A – 6.3A . CQC07012021808 8A – 10A SU05001-2011B 1A – 2.5A Electrical Characteristics for Series SU05001-10001 3.15A – 6.3A SU05001-10002 8A SU05001-2012B 4A - 10A % of Ampere Ampere Rating Opening Time Rating E10480 0.125A - 20A 0.125A – 0.800A 60 minutes, Minimum 1A – 3.15A 60 minutes, Minimum 150% 29862 0.5A – 12A 4A – 6.3A 60 minutes, Minimum 8A – 20A 30 minutes, Minimum 1517218 0.125A-12A 0.125A – 0.800A 30 minutes, Maximum 15A*, 16A*, 20A* 1A – 3.15A 30 minutes, Maximum 210% 0.2A – 8A 4A – 6.3A 30 minutes, Maximum 40013521 *10A 8A – 20A 30 minutes, Maximum 40016610 *12A 0.125A – 0.800A .25 sec. Min.; 80 secs. Max. 1A – 3.15A .75 sec. Min.; 80 secs. Max. 275% KM41462 0.200A – 10A 4A – 6.3A .75 sec. Min.; 80 secs. Max. 8A – 20A .75 sec. Min.; 80 secs. Max. J50258578 16A/20A 0.125A – 0.800A .05 sec., Min.; 5 secs. Max. 1A – 3.15A .095 sec., Min.; 5 secs. Max. N/A 0.125A – 20A 400% 4A – 6.3A .150 sec., Min.; 5 secs. Max. 8A – 20A .150 sec., Min.; 5 secs. Max. * Approved for cartridge versions only 0.125A – 0.800A .005 sec., Min.; .150 sec. Max. 1A – 3.15A .010 sec., Min.; .150 sec. Max. 1000% 4A – 6.3A .010 sec., Min.; .150 sec. Max. 8A – 20A .010 sec., Min.; .150 sec. Max. © 2018 Littelfuse, Inc. Specifications are subject to change without notice.Application testing is strongly recommended. Revised: 04/02/18

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Electrical Characteristic Specifications by Item Maximum Agency Approvals Maximum Nominal Nominal Voltage Voltage Power Amp Amp Interrupting Cold Melting Drop at Rating Dissipation Code Rating Rating Resistance I2t Rated PS (V) at 1.5ln E (Ohms) (A2 sec) Current (W) (mV) .125 0.125 250 11.4455 0.0330 2600 1.6 x x x .160 0.16 250 7.1000 0.0465 2400 1.6 x x x .200 0.2 250 1.8400 0.340 2100 1.6 x x x x x .250 0.25 250 1.2400 0.545 1500 1.6 x x x x x .315 0.315 250 0.8800 0.975 1100 1.6 x x x x x .400 0.4 250 0.5825 1.325 1000 1.6 x x x x x .500 0.5 250 1.1675 0.420 850 1.6 x x x x x x .630 0.63 250 0.7200 0.635 650 1.6 x x x x x x .800 0.8 250 0.4675 0.975 500 1.6 x x x x x x 001. 1 250 0.1515 1.520 350 2.5 x x x x x x x x x 1500 A @ 1.25 1.25 250 0.1074 3.200 300 2.5 x x x x x x x x x 250 VAC 01.6 1.6 250 0.0707 6.830 200 2.5 x x x x x x x x x 002. 2 250 0.0566 11.680 190 2.5 x x x x x x x x x 02.5 2.5 250 0.0386 22.290 180 2.5 x x x x x x x x x 3.15 3.15 250 0.0283 43.255 140 4 x x x x x x x x x 004. 4 250 0.0185 46.960 100 4 x x x x x x x x x 005. 5 250 0.0153 66.095 100 4 x x x x x x x x x 06.3 6.3 250 0.0108 128.750 100 4 x x x x x x x x x 008. 8 250 0.0092 209.880 100 4 x x x x x x x x x 010. 10 250 0.0066 333.565 100 4 x x x x x x x* x x 012. 12 250 0.0061 515.500 100 4 x x x x x* x 015. 15 250 0.0033 1237.0 N/A** N/A** x x x* x 500 A @ 250Vac 016. 16 250 0.0031 1408.0 N/A** N/A** x x x* x x 020. 20 250 400 A @ 250Vac 0.0023 2600.0 N/A** N/A** x x x* x x X* Approval for cartridge versions only N/A** - Please contact Littelfuse for details on these parameters Product Characteristics 1A to 2A have an IR : 100A@500VAC, 4A to 6-3A have the IR : 100A@305 VAC and 1000A@72VDC I2t test at 10x rated current. Body: Ceramic Temperature Re-rating Curve Materials Cap: Nickel–plated Brass Leads: Tin–plated Copper Terminal MIL-STD-202, Method 211, Test Condition A Strength Solderability MIL-STD-202 Method 208 Product Cap 1: Brand logo, current and voltage ratings Marking Cap 2: Agency approval markings Operating –55ºC to +125ºC Temperature MIL-STD-202, Method 107, Test Condition B (5 Thermal Shock cycles, –65ºC to +125ºC) Vibration MIL-STD-202, Method 201 MIL-STD-202, Method 103, Test Condition A Humidity (High RH (95%) and elevated temp (40ºC) for 240 hours) Salt Spray MIL-STD-202, Method 101, Test Condition B © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/02/18

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Average Time Current Curves T-C Curves for 125mA to 800mA only T-C Curves for 1A to 20A only .125 A.160 A.200 A.250 A.125 A.315 A.160 A.400 A.200 A.500 A.250 A.630 A.315 A.800 A.400 A.500 A.630 A.800 A 1.00 A1.25 A1.60 A2.00 A1.00 A2.50 A1.25 A3.15 A1.60 A4.00 A2.00 A5.00 A2.50 A6.30 A3.15 A8.00 A4.00 A10.0 A5.00 A12.0 A6.30 A15.0 A8.00 A16.0 A10.0 A20.0 A12.0 A15.0 A16.0 A20.0 A 1000010000 1000010000 1000 1000 1000 1000 100 100 100 100 NDS NDS NDS NDS N SECO 10N SECO 10 N SECO 10N SECO 10 ME I ME I ME I ME I TI 1TI 1 TI TI 0.1 0.1 0.1 0.1 0.01 0.01 0.01 0.01 0.001 0.001 0.001 0.001 0.1 0.1 1 1 10 10 100 100 1000 1000 0.1 0.1 1 1 10 10 100 100 1000 1000 CURRECNUTR IRNE ANMT PINER AEMSPERES CURRECNUTR IRNE ANMT PINER AEMSPERES Soldering Parameters - Wave Soldering 300 Recommended Process Parameters: C) - Measured on bottom side of board 11111222228024680246800000000000 S( PD roe eTTPpleedhermmneeedhraspp e WtPoee:anorrat aaF tTvttl Tuuuiexmerr eeAmPec aMMt:pirveaaaintrmixoaiimnmte Tuuteuremmemrp::e:rature) (1621T05y06Lp00-0ei1c°°°aa8 ldCC C0In- dFsMuerseactrexoy i nmRRdeeucscommommemndeatniodn)ation mperature (° 246000 RSeocldoemr mDweenldl Teidm eH:and-Solder 2P-a5r saemcoentdesrs: Te 00 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Solder Iron Temperature: 350° C +/- 5°C Time (Seconds) Heating Time: 5 seconds max. Preheat Time Cooling Time Note: These devices are not recommended for IR or Dwell Time Convection Reflow process. Different values of A and B available, please contact the Littelfuse sales representative in your region: A B For the pigtailed fuse, please follow the recommendations below for axial lead forming and mounting into PCB: C Lead forming: The distance C between cap flat surface and axial lead shall C A be greater than 1.0 mm. PCB mounting: The distance between PCB and fuse cap is recommended to B be a minimum of 1.5 mm. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/02/18

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 215 Series Dimensions Part Numbering System All dimensions in mm 0215 xxxx M X E/G P 20±0.5 0215t.o125P 5.2+−00..12 Series 0215020P 5.1±0.6 5.1±0.6 Amp Code Refer to Amp Code column of Electrical Characteristics Table 5.6±0.4 0215.125XEP 40±1.0 21.5±1.0 to Quantity Code 0215.800XEP 0.65±0.05 M = 1000 H = 100 Packaging Code 0215001.XEP 40±1.0 21.5±1.0 5.5±0.3 X = Filler to Option Codes 0215020.XEP Blank : Cartidge Type Fuse 0.65±0.05* E : Axial Lead Fuse G : Color Coding Notes: Lead-free * Ratings above 6.3 A have 0.8 ± 0.05 diameter lead; * Ratings above 12 A have 1.2 ± 0.05 diameter lead. Packaging Quantity & Packaging Option Packaging Specification Quantity Taping Width Packaging Code 215 Series Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Reel and Tape N/A 1000 MRET1 T1=53mm (2.087”) Bulk and Color Coding N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 04/02/18