Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series 213 Series, 5×20 mm, Time-Lag Fuse RoHS Pb PS E Description 5×20mm time-Lag surge withstand glass body cartridge fuse designed to IEC specification. Features • Designed to International • Meets the IEC 60127-2, (IEC ) Standards for use Sheet 3 specification for globally time-Lag fuses • Available in cartridge and • RoHS compliant and axial lead form lead-free. Applications Used as supplementary protection in appliance or utilization Agency Approvals equipment to provide individual protection for components or internal circuits. Agency Agency File Number Ampere Range Electrical Characteristic for Series Cartridge: NBK090205-E10480A 1A-5A NBK120802-E10480C 6.3A PES Leaded: NBK090205-E10480B 1A-5A % of Ampere Ampere Rating Opening Time NBK120802-E10480D 6.3A Rating 150% 60 minutes, Minimum 2003010207045592 0.200A – 6.3A 210% 2 minutes, Maximum E10480 275% All Ratings 0.6 sec., Min.; 10 sec. Max. 400% .15 sec., Min.; 3 sec. Max. 029862 0.200A – 6.3A 1000% 0.02 sec., Min.; 0.3 sec. Max. 1718680 Additional Information 40015638 0.200A – 6.3A KM41462 0.200A – 6.3A SU05001-12002 3.15A-5A SU05001-12001 6.3A Datasheet Resources Samples N/A 0.200A – 6.3A Electrical Characteristic Specifications by Item Maximum Maximum Agency Approvals Nominal Voltage Nominal Voltage Power Amp Ampere Interrupting Cold Rating Melting Drop at Rated Dissipation Code Rating (V) Rating Resistance I2t (A2 sec) Current at 1.5ln PES (Ohms) (mV) (W) .200 0.2 250 1.6000 0.22500 1500 1.6 x x x x x x x .250 0.25 250 1.0495 0.55500 1300 1.6 x x x x x x x .315 0.315 250 0.8475 1.14000 1100 1.6 x x x x x x x x .400 0.4 250 0.5350 1.36000 1000 1.6 x x x x x x x x .500 0.5 250 0.3700 2.90500 900 1.6 x x x x x x x x .630 0.63 250 0.2750 4.80000 300 1.6 x x x x x x x x .800 0.8 250 35A@250Vac 0.1635 9.42000 250 1.6 x x x x x x x x 001. 1 250 0.1165 19.20000 150 1.6 x x x x x x x x x 1.25 1.25 250 0.0817 27.15000 150 1.6 x x x x x x x x x 01.6 1.6 250 0.0551 44.20000 150 1.6 x x x x x x x x x 002. 2 250 0.0452 92.70500 150 1.6 x x x x x x x x x 02.5 2.5 250 0.0305 138.00000 120 1.6 x x x x x x x x x 3.15 3.15 250 0.0231 202.00000 100 1.6 x x x x x x x x x 004. 4 250 40A@250Vac 0.0170 226.50500 100 1.6 x x x x x x x x x 005. 5 250 50A@250Vac 0.0116 314.00000 100 1.6 x x x x x x x x x 06.3 6.3 250 63A@250Vac 0.0095 600.00000 100 1.6 x x x x x x x x x © 2017 Littelfuse, Inc. Specifications are subject to change without notice.Application testing is strongly recommended. Revised: 12/14/17

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Temperature Re-rating Curve Average Time Current Curves 0.200A0.250A0.315A0.400A0.500A0.630A0.800A1A1.25A1.6A2A2.5A3.15A4A5A6.3A 10000 1000 100 ME IN SECONDS 10 TI 1 0.1 0.01 0.001 0.1 1 10 100 1000 CURRENT IN AMPERES Soldering Parameters - Wave Soldering 300 Recommended Process Parameters: C) - Measured on bottom side of board 11111222228024680246800000000000 S( PD roe eTTPpleedhermmneeedhraspp e WtPoee:anorrat aaF tTvttl Tuuuiexmerr eeAmPec aMMt:pirveaaaintrmixoaiimnmte Tuuteuremmemrp::e:rature) (1621T05y06Lp00-0ei1c°°°aa8 ldCC C0In- dFsMuerseactrexoy i nmRRdeeucscommommemndeatniodn)ation mperature (° 246000 Solder Dwell Time: 2-5 seconds Te 00 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Recommended Hand-Solder Parameters: Time (Seconds) Solder Iron Temperature: 350° C +/- 5°C Preheat Time Cooling Time Heating Time: 5 seconds max. Dwell Time Note: These devices are not recommended for IR or Convection Reflow process. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/14/17

Axial Lead & Cartridge Fuses 5×20 mm > Time-Lag > 213 Series Product Characteristics Material Body: Glass Operating –55ºC to +125ºC Cap: Nickel–plated brass Temperature Leads: Tin–plated Copper MIL-STD-202, Method 107, Test Condition Thermal Shock B: (5 cycles –65°C to +125°C) Terminal Strength MIL-STD-202, Method 211, Test Condition A Vibration MIL-STD-202, Method 201 Solderability MIL-STD-202, Method 208 MIL-STD-202, Method 103, Test Product Marking Cap1: Brand logo, current and voltage Humidity Condition A. High RH (95%) and elevated Cap2: Agency approval marks Series temperature (40°C) for 240 hours. Packaging Available in Bulk (M=1000 pcs/pkg) or on Salt Spray MIL-STD-202, Method 101, Test Condition B Tape/Reel (MRET1=1000 pcs/reel) Dimensions Part Numbering System 20±0.5 0213 xxxx M X E P 0213 000P 5.2+0.1 -0.2 5.1±0.6 5.1±0.6 Series Lead-free 0213 000 XEP 5.5±0.3 40±1.0 21.5±1.0 Amp Code Option Codes Refer to Amp Code column of Blank : Cartidge Type Fuse Electrical Characteristics Table E : Axial Leaded Fuse 0.65±0.05* Note: Quantity Code Packaging Code - All dimensions in mm M = 1000 X = Filler Packaging Packaging Option Packaging Specification Quantity Quantity & Packaging Code Taping Width 213 Series Bulk N/A 1000 MX N/A Bulk N/A 1000 MXE N/A Reel and Tape N/A 1000 MRET1 T1=53mm (2.087”) Bulk N/A 1000 MXG N/A Bulk N/A 1000 MXB N/A Bulk N/A 100 HX N/A Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 12/14/17