In-Line Cartridge Fuse Holders Fuse Holder > 150 155100 Series Twist-Lock In-Line Holders for 3AG/AB Fuses RoHS Pb Product Characteristics For low voltage 3AG/AB or SFE Fuse Compatible Fuses Applications Intended for use at 32 volts or less with fuses Electrical rated up to 20 amperes when the proper spring is 155 100U installed for fuse size. Black Thermoplastic (UL94 V-2). Body halves have a Molded Parts .14” diameter hole for insulated wire. Ambient –40ºC to +75ºC. Temperature Brass. Nickel plating. Designed to accommodate #14 Contact Rivet 155 100A AWG stranded wire. Supplied with 19” loop of #14 AWG red vinyl Assembled insulated wire, SFE fuse (listed) with a spring in different lengths depending of the fuse size. Unassembled For assembly to #14 AWG wire. Dimensions 150 215 is similar to 155 120A except no fuse is Options supplied. It is intended for use with 3AG fuses rated up to 20 amperes. 55.63 Supplied with a spring in different lengths depending In-Line Fuseholder (2.19") of the fuse size. * Please refer to Fuseology section for information on proper fuseholder re-rating. 15.24 (.60") Additional Information Datasheet Resources Samples Ordering Information Unassembled Assembled Ordering Catalog For Fuse Ordering Catalog Fuse Packaging Number Number Size Number Number Installed - 155 100 All below 01550100Z* - - Bulk Pack (100 Pcs) 01550104ZXU 155 104U ¼” × 5/8” 01550104ZXA 155 104A SFE 4 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) 01550106ZXU 155 106U ¼” × ¾” 01550106ZXA 155 106A SFE 6 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) 01550109ZXU 155 109U ¼” × 7/8” 01550109ZXA 155 109A SFE 9 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) 01550114ZXU 155 114U ¼” × 1 1/16” 01550114ZXA 155 114A SFE 14 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) 01550120ZXU 155 120U ¼” × 1 ¼” 01550120ZXA 155 120A SFE 20 Bulk Pack (100 Pcs - Assembled) (100 Pcs- Unassembled) ¼” × 1 1/16” - - 01500215Z - - Bulk Pack (100 Pcs) ¼” × 1 ¼” * Supplied with 8” loop of #14 AWG red vinyl insulated wire and two springs in different lengths to accommodate SFE sized fuses. (Fuse not included) ** Fuseholders with specific wire sizes and lengths are available on special order. Warning: Electrical Shock. Power must be disconnected prior to handling fuse. Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test eaccvh product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics. © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 09/11/20