Standard 26-28 AWG: WTB IINNTTEERR CCOONNNNEECCTT 00-9175 The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. The simplicity of inserting a wire into the connector with a small tool allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these connectors are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the housing has been designed to grab the insulation of the wire to provide a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The 9175 series accepts 26 AWG to 28 AWG wires with an insulation diameter ranging from 0.7mm to 1.0mm. These single contact connectors support a 1 amp current rating and have a split SMT tail design to provide maximum stability on the PCB. Available in a 2p and 3p configuration, these connectors can be end stackable for higher pin counts. APPLICATIONS FEATURES AND BENEFITS (cid:129) Connecting discrete wire components (cid:129) IDC contact provides a gas-tight connection to the PCB for long term reliability directly to the PCB (cid:129) Connector housing captures the wire insulation for positive strain relief (cid:129) Bringing power and signals onto a PCB (cid:129) Tested to automotive levels on shock, vibration and temperature cycling for reliability (cid:129) Daisy chaining PCB’s together to create (cid:129) Low and high volume assembly tools to match production volumes a continuous string of boards (cid:129) Reduced total applied cost versus solder or crimp processes (cid:129) Application Notes: refer to 201-01-124 (cid:129) High temperature insulator capable to 260 degrees C reflow soldering processes ELECTRICAL ENVIRONMENTAL MECHANICAL (cid:129) Current Rating: 1 Amp / Contact (cid:129) Operating Temperature: (cid:129) Insulator Material: Nylon 46: UL94V0 (cid:129) Voltage Rating: 150 VAC -40ºC to +125ºC (cid:129) Contact Material: Phosphor Bronze (cid:129) Plating: Tin over Nickel (cid:129) Durability: 3 Cycles HOW TO ORDER 00 9175 00X 00X X 06 Prefix Series Number of Ways Wire Gauge Size Insulator Color Plating 9 = UL White Option Code No of Details Code Accepted Wire 8 = UL Black 06 = Pure Tin Ways Wire Gauge Insulation Special Order all over 002 2 Page 4 001 28 Gauge Solid or Stranded Ø 0.70 to Ø 1.00 003 3 Page 5 002 26 Gauge Solid or Stranded Ø 0.70 to Ø 1.00 CONNECTOR/TOOLING PART NUMBER MATRIX SERIES 9175 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Mass AWG Positions Color Part Number Though Wire Wire Stop Insulation (medium volume) (high volume) Termination 26 Ø 0.7 - 1.0 2p White 009175002002906 069175701601000 069175701701000 069175701701002 609175002010100 609175002010199 26 Ø 0.7 - 1.0 2p Black 009175002002806 069175701601000 069175701701000 069175701701002 609175002010000 609175002010099 26 Ø 0.7 - 1.0 3p White 009175003002906 069175701601000 069175701701000 069175701701003 609175003010100 609175003010199 26 Ø 0.7 - 1.0 3p Black 009175003002806 069175701601000 069175701701000 069175701701003 609175003010000 609175003010099 28 Ø 0.7 - 1.0 2p White 009175002001906 069175701601000 069175701701000 069175701701002 609175002010100 609175002010199 28 Ø 0.7 - 1.0 2p Black 009175002001806 069175701601000 069175701701000 069175701701002 609175002010000 609175002010099 28 Ø 0.7 - 1.0 3p White 009175003001906 069175701601000 069175701701000 069175701701003 609175003010100 609175003010199 28 Ø 0.7 - 1.0 3p Black 009175003001806 069175701601000 069175701701000 069175701701003 609175003010000 609175003010099 * Hand Insertion Tooling - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124 Certification: UL File #E90723 3 032117

Standard 26-28 AWG: WTB IINNTTEERR CCOONNNNEECCTT 00-9175 26-28 AWG 2 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 3. 3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR STRANDED WIRE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-100, UL COMPONENTS REFER TO ELCO SPEC 201-01-100UL. 6. APPLICATION NOTES 201-01-124. 7. FOR UL PRODUCT CODES UL REFERENCE 390723 (US AND CANADA). 8. CONNECTOR OUTLINE. 9 ALL DIMENSIONS ±0.20 UNLESS TOLERANCE SPECIFIED. SMT PCB LAYOUT PURE TIN PADS Code Wire Gauge A 001 28AWG 0.20 002 26AWG 0.28 PACKING DETAILS REEL QTY 2000 LEADER 500MM TRAILER 500MM 4 032117

Standard 26-28 AWG: WTB IINNTTEERR CCOONNNNEECCTT 00-9175 26-28 AWG 3 WAY IDC CONNECTOR NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46. COLOR REFER TO PAGE 3. 3. CONNECTOR DESIGNED TO ACCEPT 26 AND 28 GAUGE SOLID OR STRANDED WIRE. 4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 5. FOR FULL PRODUCT SPECIFICATION ON STANDARD CONNECTORS REFER TO ELCO SPEC 201-01-100, UL COMPONENTS REFER TO ELCO SPEC 201-01-100UL. 6. APPLICATION NOTES 201-01-124. 7. FOR UL PRODUCT CODES UL REFERENCE 390723 (US AND CANADA). 8. CONNECTOR OUTLINE. 9 ALL DIMENSIONS ±0.20 UNLESS TOLERANCE SPECIFIED. SMT PCB LAYOUT PURE TIN PADS Code Wire Gauge A 001 28AWG 0.20 002 26AWG 0.28 PACKING DETAILS REEL QTY 2000 LEADER 500MM TRAILER 500MM 5 032117

Standard 26-28 AWG: WTB IINNTTEERR CCOONNNNEECCTT 00-9175 60-9175-00X-010-X00 ACCESSORY CAP – THROUGH WIRE ASSEMBLED DIMENSIONS NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3 WAY, THROUGH WIRE. 2. THROUGH WIRE CAP CAN BE USED AT ANY POSTION ALONG A WIRE. 3. FOR USE WITH STANDARD 9175 IDC CONNECTORS 4. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE PAGE 3. 5. CAPS DESIGNED TO ACCOMMODATE WIRES WITH INSULATION UP TO 1.00MM DIAMETERS. 6. GENERAL TOLERANCE ±0.20. 7. PACKED IN BAGS, 1000 PIECES PER BAG. 8. ALL DIMENSIONS ±0.20 UNLESS TOLERANCE SPECIFIED. 6 032117

Standard 26-28 AWG: WTB IINNTTEERR CCOONNNNEECCTT 00-9175 60-9175-00X-0XX-010-X99 ACCESSORY CAP – WIRE STOP ASSEMBLED DIMENSIONS NOTES: 1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3 WAY, WIRE STOP. 2. WIRE STOP CAP FOR USE AT WIRE ENDS, STOP FACE PROTECTS THE WIRE ENDS. 3. FOR USE WITH STANDARD 9175 IDC CONNECTORS 4. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS SEE PAGE 3. 5. CAPS DESIGNED TO ACCOMMODATE WIRES WITH INSULATION UP TO 1.00MM DIAMETERS. 6. GENERAL TOLERANCE ±0.20. 7. PACKED IN BAGS, 1000 PIECES PER BAG. 8. ALL DIMENSIONS ±0.20 UNLESS TOLERANCE SPECIFIED. 7 032117

Standard 26-28 AWG: WTB IINNTTEERR CCOONNNNEECCTT 00-9175 HAND INSERTION TOOLING SINGLE WIRE INSERTION TOOL FOR 26/28 GAUGE WIRE UNIVERSAL HANDLE Tool Details Part Number 6.35 A/F HEX BIT HOLDER 06-7000-7730-01-000 HIGH PRODUCTION MEDIUM PRODUCTION Metal Metal/Plastic Max Max Tool Tool Insulation Insulation Part Number Part Number Dia Dia (cid:2) 1.00 06-9175-7017-01-000 (cid:2) 1.00 06-9175-7016-01-000 CLEARANCE AREA ON PCB FOR HAND TOOLING 2 WAY 3 WAY 8 032117

Standard 26-28 AWG: WTB IINNTTEERR CCOONNNNEECCTT 00-9175 INSERTION TOOLING REQUIRES HAND PRESS WITH FLAT ROCK PLATES 2 WAY TOOL 3 WAY TOOL TOOL NUMBER 06-9175-7017-01-002 TOOL NUMBER 06-9175-7017-01-003 SKETCH SHOWS PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING SKETCH SHOWS PCB RESTRICTED AREAS FOR ASSEMBLY TOOLING NOTES: 1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS. 2. MAXIMUM COMPONENT HEIGHT 0.80MM IN THIS AREA. 3. MAXIMUM COMPONENT HEIGHT 4.00MM IN THIS AREA. 4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS. ASSEMBLED CONNECTOR STANDARD CONNECTOR CONNECTOR WITH CAP NOTES: 1. ASSEMBLED HEIGHTS INCLUDE A 0.10MM ALLOWANCE FOR PAD AND SOLDER THICKNESS, NO ALLOWANCE HAS BEEN MADE FOR ANY SOLDER RESIST OR OTHER FEATURES. 2. WHEN THE WIRE IS ASSEMBLED THE INSULATION SHOULD BE TRAPPED BY THESE EDGES. 9 032117